CA M15A4 Sportline Rails and Stocks

disasterarea · December 1st, 2011, 14:16

I'm thinking of modifying my new M15A4 from the old-style M4A1 with a round forearm and CAR sliding stock to something with a SIR/S-System forend and a Vltor or CTR stock. I've got two questions: I want to keep it front-wired, would this be possible with an SIR forend, and two, how in god's name does this thing disassemble? AEG external work isn't new to me, but this thing is just weird. There don't seem to be any assembly screws in the stock, and the front sight/front ring assembly are held together with some kind of hollow pins. How exactly are you meant to remove these? I think doing it with a punch as I'd normally do would damage them.

Spike · December 1st, 2011, 14:20

Some SIR rails or CASV rails will hold a mini battery, or you could always have your battery in a dummy PEQ box.

Are you sure there's no screw inside the buffer tube? There should be. And the pins in the front sight do have to come out or the front sight will not move. There may or may not also be a grub screw underneath the sight, but you may have to get the pins out first.

disasterarea · December 1st, 2011, 14:31

Quote:

Originally Posted by Spike

Some SIR rails or CASV rails will hold a mini battery, or you could always have your battery in a dummy PEQ box.

Are you sure there's no screw inside the buffer tube? There should be. And the pins in the front sight do have to come out or the front sight will not move. There may or may not also be a grub screw underneath the sight, but you may have to get the pins out first.

Yeah, the grub screw I'm used to. The pins just look flimsy as all hell is the problem. As for the buffer screw, where should I be looking? It's not at the back as far as I can tell, there's just a little hole.

Spike · December 2nd, 2011, 21:01

There's a screw inside the buffer tube that you need to remove with a long screwdriver. Is this the issue, or can you not get the cap off the back of the buffer tube?

disasterarea · December 2nd, 2011, 22:11

Quote:

Originally Posted by Spike

There's a screw inside the buffer tube that you need to remove with a long screwdriver. Is this the issue, or can you not get the cap off the back of the buffer tube?

Ha, okay, I didn't think of trying to get the cap off. Will give that a go tomorrow.

disasterarea · December 4th, 2011, 20:35

One last thing: putting on a SIR/CASV rail would necessitate the removal of the one already on the upper flattop, right? It'd go screwed in to the mount points on the flattop?

Spike · December 9th, 2011, 00:46

Negative, the CASV/SIR system mounts on top of the rail that's already on the top of the receiver.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 1st, 2011, 14:16	#1
disasterarea Trader rating Join Date: Jul 2009	CA M15A4 Sportline Rails and Stocks I'm thinking of modifying my new M15A4 from the old-style M4A1 with a round forearm and CAR sliding stock to something with a SIR/S-System forend and a Vltor or CTR stock. I've got two questions: I want to keep it front-wired, would this be possible with an SIR forend, and two, how in god's name does this thing disassemble? AEG external work isn't new to me, but this thing is just weird. There don't seem to be any assembly screws in the stock, and the front sight/front ring assembly are held together with some kind of hollow pins. How exactly are you meant to remove these? I think doing it with a punch as I'd normally do would damage them.

December 1st, 2011, 14:20	#2
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	Some SIR rails or CASV rails will hold a mini battery, or you could always have your battery in a dummy PEQ box. Are you sure there's no screw inside the buffer tube? There should be. And the pins in the front sight do have to come out or the front sight will not move. There may or may not also be a grub screw underneath the sight, but you may have to get the pins out first. __________________ I change primaries like other people change socks.

December 2nd, 2011, 21:01	#4
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	There's a screw inside the buffer tube that you need to remove with a long screwdriver. Is this the issue, or can you not get the cap off the back of the buffer tube? __________________ I change primaries like other people change socks.

December 4th, 2011, 20:35	#6
disasterarea Trader rating Join Date: Jul 2009	One last thing: putting on a SIR/CASV rail would necessitate the removal of the one already on the upper flattop, right? It'd go screwed in to the mount points on the flattop?

December 9th, 2011, 00:46	#7
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	Negative, the CASV/SIR system mounts on top of the rail that's already on the top of the receiver. __________________ I change primaries like other people change socks.

CA M15A4 Sportline Rails and Stocks

Accessories Discussion