AWS mosfet, lipo and buffer tube?

PrIeSt · December 6th, 2011, 13:28

Has anyone succesfully installed the AWS mosfet along with a lipo int he buffer tube yet?
I've had a few guys ask me. Although to me it looks like it will fit. It's hard to tell for sure.
Which battery were you able to fit? 11 or 7 will work as this mosfet allows ROF control.

Thank you

phloudernow · December 6th, 2011, 14:09

Send a PM to my brother Noveske, he's gota a couple installed in his guns, as far as I know, the AWS is a FET unit that just drops and replaces the trigger mechanism or whatnot. not sure tho gota ask my brother hahaha but yeah send him a PM shouldn't take any space in the buffer tube from what i know. everything is controlled from that little electronic control thing in the trigger.

cellulose · December 6th, 2011, 14:24

Looks like it shouldn't be a problem to install in the tube, I fit an SW-Evolution and the monitoring PCB with a 7.4v in the buffer tube. The AWS is much smaller so you might even be able to go for a 11.1v.

MultipleParadox · December 6th, 2011, 14:51

I'm running an ASCU2 with 11.1v HotPower Lipo in my M4
Shortest Stock setting is 3 but working fine none the less

Dynamo · December 6th, 2011, 14:57

i have the AWS Rapter installed on my VFC 416 with a lipo in the buffer tube.
installing the AWS wasn't a big deal, just a drop in replacement for the switch. the mod needed to fit a lipo in the buffer on the other hand was a real bitch.

PrIeSt · December 6th, 2011, 20:46

Well AWS makes a fet and a trigger fet. I'm meaning the regular mosfet

So chances are it works. glad to know.

This one should fit?
http://www.hobbyking.com/hobbyking/s...FT%5FPack.html

EagleDriver · December 8th, 2011, 01:48

The King Arms 11.1v 1100 MAH buffer tube lipo (102mm long) will fit and allow full stock movement. Hot Power also makes a similar sized but slightly thinner 7.4v that is 105mm long.

THe_Silencer · December 8th, 2011, 07:06

I have the AWS mircofet and had no issues fitting it in the buffer tube, not surprisingly since its their smallest model.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 6th, 2011, 13:28	#1
PrIeSt takagari Trader rating Join Date: Sep 2008 Location: Anola(ish) MB	AWS mosfet, lipo and buffer tube? Has anyone succesfully installed the AWS mosfet along with a lipo int he buffer tube yet? I've had a few guys ask me. Although to me it looks like it will fit. It's hard to tell for sure. Which battery were you able to fit? 11 or 7 will work as this mosfet allows ROF control. Thank you __________________ Eddie Creek, MB Airsoft Field, Valken Dealer, Local Age Verification [COLOR="DarkOrange"][B]

December 6th, 2011, 14:09	#2
phloudernow Trader rating Join Date: Nov 2010 Location: Toronto - Ontario, Vancouver - B.C and Hong Kong	Send a PM to my brother Noveske, he's gota a couple installed in his guns, as far as I know, the AWS is a FET unit that just drops and replaces the trigger mechanism or whatnot. not sure tho gota ask my brother hahaha but yeah send him a PM shouldn't take any space in the buffer tube from what i know. everything is controlled from that little electronic control thing in the trigger. __________________ Current Lineup: VFC HK416 Custom Custom Bowie Tactical x SAI Glock 17 (TM Base), Custom SAI BLU Glock Build (Timberwolf Base) Custom Zev Noveske Shooting Team Glock 34 Project Guns Custom Zev Dragonfly G17 (Project) (In progress)

December 6th, 2011, 14:24	#3
cellulose formerly aBseNtceLL Trader rating Join Date: Mar 2009 Location: Winnipeg, MB	Looks like it shouldn't be a problem to install in the tube, I fit an SW-Evolution and the monitoring PCB with a 7.4v in the buffer tube. The AWS is much smaller so you might even be able to go for a 11.1v. __________________ Follow me on Tumblr: http://m-sean.tumblr.com

December 6th, 2011, 14:57	#5
Dynamo Harvester of Noobs' Sorrow Trader rating Join Date: Oct 2003 Location: T̆͒ͥ̓̿̅̈́̐͊̿͗̐̾̃͐ͧ&#8	i have the AWS Rapter installed on my VFC 416 with a lipo in the buffer tube. installing the AWS wasn't a big deal, just a drop in replacement for the switch. the mod needed to fit a lipo in the buffer on the other hand was a real bitch. __________________ Weapons Technician / Gunsmith Don't look at me, I don't know, lol ¯\(°_o)/¯.

December 6th, 2011, 20:46	#6
PrIeSt takagari Trader rating Join Date: Sep 2008 Location: Anola(ish) MB	Well AWS makes a fet and a trigger fet. I'm meaning the regular mosfet So chances are it works. glad to know. This one should fit? http://www.hobbyking.com/hobbyking/s...FT%5FPack.html __________________ Eddie Creek, MB Airsoft Field, Valken Dealer, Local Age Verification [COLOR="DarkOrange"][B]

December 8th, 2011, 01:48	#7
EagleDriver Trader rating Join Date: Feb 2009 Location: Baltimore, MD USA	The King Arms 11.1v 1100 MAH buffer tube lipo (102mm long) will fit and allow full stock movement. Hot Power also makes a similar sized but slightly thinner 7.4v that is 105mm long.

December 8th, 2011, 07:06	#8
THe_Silencer Trader rating Join Date: Jul 2009 Location: Hamilton,ON	I have the AWS mircofet and had no issues fitting it in the buffer tube, not surprisingly since its their smallest model. __________________ It is the mark of an educated mind to be able to entertain a thought without accepting it - Aristotle -Founder of Steel City Hamilton Infantry and Tactics -Certified level 43 Autosniper by Commander Amos

AWS mosfet, lipo and buffer tube?

Accessories Discussion