KWA G36 Broken Piece - Front of the gearbox

Greyhame888 · May 23rd, 2011, 23:03

Hey guys, one of my teammates has had an feeding issue on his KWA G36, it won't load BBs from any of his mags, and the mags work in other guns, so I decided to open it up and take a look.

There are no jams and the hopup seems fine, but when I pulled the gearbox out, this part was separated from everything else. I have an idea of what it is, but I'm not positive. Can anyone let me know exactly what it is? I need to order a new one, and hopefully that will fix the problem. The plastic part seems intact, but one of the brass tabs is totally broken off.

Thanks in advance for any help!

Canadian Psycho · May 23rd, 2011, 23:06

Its your cylinder head, it has shattered, quite common in the KWAs. You will need to replace it, I would probably upgrade to a better one by a company like Prometheus.

Greyhame888 · May 23rd, 2011, 23:10

Ahh, that's what I figured it was, thanks a bunch!

Assuming nothing else internally is askew, it's a standalone part I can replace correct?

Canadian Psycho · May 24th, 2011, 00:39

Yes, you can replace just the cylinder head, just make sure you lube the o-ring. As well, check the front of the tappet plate, it often breaks along with the cylinder head. There will be a vertical piece on the front of the tappet plate that fits with the nozzle, make sure it is solid and not cracked or broken.

HKGhost · May 24th, 2011, 00:58

Also, if it has an aluminum piston head, replace it with a polycarbonate one as the metal one will just break your replacement cylinder head.

Warlock · May 24th, 2011, 09:00

Put a systema cylinder head and piston head

CJay · May 24th, 2011, 22:19

Just a tip as i'm sure has been mentioned - KWA pistonheads are shit and prone to this - just buy a full metal and avoid it happening again and again lol - I've repaired 12 in the last 2 months - brand new guns

SuperCriollo · May 24th, 2011, 23:36

Happened the same to mine..... POS

THe_Silencer · May 25th, 2011, 20:38

Quote:

Originally Posted by CJay

Just a tip as i'm sure has been mentioned - KWA pistonheads are shit and prone to this - just buy a full metal and avoid it happening again and again lol - I've repaired 12 in the last 2 months - brand new guns

I think you meant "cylinderhead" Replacing the pistonhead with a metal one will only exacerbate the issue.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

May 23rd, 2011, 23:03	#1
Greyhame888 Trader rating Join Date: May 2009 Location: Near Edmonton, AB	KWA G36 Broken Piece - Front of the gearbox Hey guys, one of my teammates has had an feeding issue on his KWA G36, it won't load BBs from any of his mags, and the mags work in other guns, so I decided to open it up and take a look. There are no jams and the hopup seems fine, but when I pulled the gearbox out, this part was separated from everything else. I have an idea of what it is, but I'm not positive. Can anyone let me know exactly what it is? I need to order a new one, and hopefully that will fix the problem. The plastic part seems intact, but one of the brass tabs is totally broken off. Thanks in advance for any help!

May 23rd, 2011, 23:06	#2
Canadian Psycho Personal Mule.....PM for rates! Trader rating Join Date: Oct 2004 Location: Alberta	Its your cylinder head, it has shattered, quite common in the KWAs. You will need to replace it, I would probably upgrade to a better one by a company like Prometheus. __________________ "Those who have long enjoyed such privileges as we enjoy, forget in time that men have died to win them" Franklin D. Roosevelt

May 24th, 2011, 00:39	#4
Canadian Psycho Personal Mule.....PM for rates! Trader rating Join Date: Oct 2004 Location: Alberta	Yes, you can replace just the cylinder head, just make sure you lube the o-ring. As well, check the front of the tappet plate, it often breaks along with the cylinder head. There will be a vertical piece on the front of the tappet plate that fits with the nozzle, make sure it is solid and not cracked or broken. __________________ "Those who have long enjoyed such privileges as we enjoy, forget in time that men have died to win them" Franklin D. Roosevelt

May 23rd, 2011, 23:10	#3
Greyhame888 Trader rating Join Date: May 2009 Location: Near Edmonton, AB	Ahh, that's what I figured it was, thanks a bunch! Assuming nothing else internally is askew, it's a standalone part I can replace correct?

May 24th, 2011, 00:58	#5
HKGhost Trader rating Join Date: Nov 2009 Location: Mississauga, ON	Also, if it has an aluminum piston head, replace it with a polycarbonate one as the metal one will just break your replacement cylinder head. __________________ Please email me as I'm not on ASC too often. Custom Build \| Upgrades \| Repairs \| Maintenance Contact: ghostgunwork@gmail.com / Private Message

May 24th, 2011, 09:00	#6
Warlock Trader rating Join Date: Aug 2009 Location: Laurentians	Put a systema cylinder head and piston head __________________

May 24th, 2011, 22:19	#7
CJay Trader rating Join Date: Oct 2008 Location: Belle River, ON	Just a tip as i'm sure has been mentioned - KWA pistonheads are shit and prone to this - just buy a full metal and avoid it happening again and again lol - I've repaired 12 in the last 2 months - brand new guns __________________ "Creator of the Zombat Sniper - oh yeah baby"

May 24th, 2011, 23:36	#8
SuperCriollo Trader rating Join Date: Apr 2009 Location: Kitchener, ON	Happened the same to mine..... POS __________________ SuperCriollo

KWA G36 Broken Piece - Front of the gearbox

Doctor's Corner