Colt Canada SFW build

[PresBoots]

http://fr.academic.ru/pictures/frwik...e_launcher.jpg
(hopefully this link will work)
I'm planning on creating literally this ^

Ive found the outer barrel I need- Madbull Dissipator 16in
Found the grenade launcher I need- madbul AGX with PVC barrel extension
Ive seen Eclan replica by KA (more realistic)
and Ive seen a super awesome Elclan on UN Company(super cool and best candidate for purchase)
And maybe a small peq lipo box

I'm just wondering if there are any Colt Canada bodies around in the Airsofting world
I highly doubt it but...

And for the base gun I was thinking a G&P or a KWA

And for a rail system,
I would rather only use the bottom half to mount the AGX
but is this even possible to have a railed lower and a regular handguard upper?



Ive posted this thread on AirsoftForums (US based) and got directed here,

I'm looking for a Colt Canada body mainly
and some guidance on my next endeavor since its y'alls weaponry I'll be recreating

thanks
____________

[stephenseth]

you felt like making a second post of the same thing? nice...

[L473ncy]

First, welcome.

Second, I don't know of many Colt Canada/Diemaco bodies floating around.

I believe the TK/KJW "M4" GBBR has Colt Canada/Diemaco markings however they may have only been produced for shipping out to Canada, not only that it's a plastic body and clear at that. you'd have to paint it and colour in the trades afterwards.

Another option might be to get a blank lower and have someone laser engrave it however you'd probably need an .svg or .psd file for the shop to load it into their machine to laser engrave.

PS: Also the link you gave is broken, check "disable smiles" in the additional options section of the posting page.

EDIT: @ stephenseth I think he said it was because he thought he posted in the wrong section.

@ OP: next time just report your thread and flag it so that an admin can move it, no need to make a new thread.

[PresBoots]

Originally Posted by L473ncy

First, welcome.

Another option might be to get a blank lower and have someone laser engrave it however you'd probably need an .svg or .psd file for the shop to load it into their machine to laser engrave.

PS: Also the link you gave is broken, check "disable smiles" in the additional options section of the posting page.


@ OP: next time just report your thread and flag it so that an admin can move it, no need to make a new thread.

I didn't know what to do about posting in the wrong section, so I made a new thread. There was no "delete" button as other forums have.
I checked the disable smile button so hopefully the link will work

Thanks, I asked my friend about the Colt Canada body and he mentioned taking it to a CNC shop as you mentioned

It seems like just making a custom body would be the best thing to do.
I was hoping not to go that deep into customization that a custom marked body would be needed, but I guess that would be another thing to differentiate my M4 series from the other guy's since they are everywhere down here.

[The Chad]

You're in Texas? Why don't you have a real one? LOL

[Kokanee]

@Presboots; lemme know if you want a Diemaco rear BUIS for that build.

Originally Posted by The Chad

You're in Texas? Why don't you have a real one? LOL

I've viewed a few threads today, all of them have you popping in to make an inane comment; never contributing constructively in any way. Just saying.

[TokyoSeven]

G&P body

http://www.airsoftglobal.com/product...oducts_id=7679

Guarder makes bodies some too.

I suppose you could always just purchase this:

http://www.airsoftglobal.com/product...ducts_id=11042

[L473ncy]

Originally Posted by TokyoSeven

G&P body

http://www.airsoftglobal.com/product...oducts_id=7679

Guarder makes bodies some too.

I suppose you could always just purchase this:

http://www.airsoftglobal.com/product...ducts_id=11042

Damn T7 you saved the day. I don't know why I didn't think of G&P bodies first. Knowing they make like 100 different bodies they should have made a Diemaco one at one point and it seems like they do.

Instead I had to go and find a convoluted way of doing it when all you had to do was go to the G&P website and find it....

Also, @OP: I believe there is another American on this board not sure from where though but he's a total Canadian Forces nut and has a CADPAT setup and all of that, try finding him on these boards and he might be able to point you in the right direction of other CF stuff that you can get your hands on so that you can emulate the CF.

[TokyoSeven]

I have my uses! I guess that's why they keep me around.
That and I bake cookies for the staff room every thursday.

[Gato]

Originally Posted by TokyoSeven

I have my uses! I guess that's why they keep me around.
That and I bake cookies for the staff room every thursday.

Not to mention the fact it's funny that most users seem to think you're the chick in your avatar

[TokyoSeven]

I find newbs listen better when they think something with bewbs is talking to them.
Makes the education process way easier.

[PresBoots]

@ The Chad
I don't have a real one
Id rather spend my money on replicas and cars than a firearm I can only take on the range

@ Kokanee

Perhaps, Perhaps

@ L473ncy
I'll look for him, Im sure it wont be hard to find another American here, I can just sniff him out

Originally Posted by TokyoSeven

G&P body

http://www.airsoftglobal.com/product...oducts_id=7679

Guarder makes bodies some too.

I suppose you could always just purchase this:

http://www.airsoftglobal.com/product...ducts_id=11042

I knew someone here would help me.
You guys are way nicer and faster at answering questions than your southern neighbors


Also, I like the other style of Eclan - The Spectre( I think) I saw it on the Colt Canada website so I suppose it is legit enough for a sight
And do any forces put a folding front sight/ railed gas block on the guns instead of a front sight?

I'm thinking with the Spectre Eclan since its got a lower profile, the front post would get in the way

I saw the C8 CQB but that is was different than what I'm looking for