Enough Room In Buffer Tube for LiPo and Trigger Master?

[Huron]

Like the title says. I've got some ugly external wires to banish and I'm wondering if I can fit a Trigger Master in the buffer tube along with the LiPo to keep the full auto ROF close to the real thing.

Any experience or suggestions would be much appreciated.

[Danke]

I don't thing so, I've only got enough room in my buffer tube for the Trigger Master and the wires. I'd say some sort of crane stock would do it with the job so you can have the battery alongside the buffer.

[ThunderCactus]

Crane stock would work, so would the magpul MOE stock with the huge cheek rest.
My setup actually looks REALLY clean, it's got a 7.4v LiPo and triggermaster in a king arms AN/PEQ-15 up front, all the wires are bundled in heat shrink so you barely notice them

[Azathoth]

TO answer your question yes.

But it really depends on what stock you are using as well as the battery. If you ever want to take down your gun I don't suggest putting your TM inside the tube. It's sounds like a good idea but it's a pain in the ass to take the gun apart and to tuck all of your wires in so the remains clean and you can put your stock onto the tube. (assuming standard LE, Mil, CTR Stock.)

[NVC]

Hey GabeGuitarded, I just finished my install of the TM3 unit in my M4 & AK the other night. You can fit a 7.4v 2 cell thin stick lipo in the buffer tube with the TM3 unit but it is very tight. I also have a 11.1V 3 cell Hotpower battery that will not fit with the TM3 unit in the buffer tube. I am using a stock G&P buffer tube and mod stock. What I did was rig a single pistol pouch to the stock as a battery pouch. I now run a 11.1V 2100 mah lipo. Install is clean and the pistol pouch is perfect size for the battery's and small enough so it doesnt get in your way. If you want some reference pics send me a pm. FYI I am using the new wiring kit that Donp sells with the TM3 unit(Trust me the wire kit make the install a breeze) And Thanks to Azathoth and Donp for the install tips!

[Huron]

Thanks all, I think I might use a Modstock with a battery in it then. Either that or rewire to the front and put it all in a PEQ-II or 15 like Thundercactus said.