|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
July 30th, 2009, 09:14 | #1 |
curved bullets
ok i just got my well mb05 and i assembled it out of the box and loaded it with .25 gram bbs i adjusted the hop up to around 60 percent turned and when i shoot it curves EXTREMELY sharpely to to the right what is wrong with the gun?
|
|
July 30th, 2009, 10:37 | #2 |
Hop up could be a little too tight, try toning it down.
|
|
July 30th, 2009, 11:02 | #3 |
the actual hop-up rubber itself could be off center. this would cause your shots to do that.
|
|
July 30th, 2009, 11:20 | #4 |
formerly Sepulcrum
|
inner barrel/hopup could be twisted or hop up rubber alone could be twisted and/or misshaped.
|
February 16th, 2010, 06:10 | #5 |
February 16th, 2010, 08:52 | #6 |
February 16th, 2010, 09:23 | #7 |
Official ASC Bladesmith
|
I'll say too much hop up, too light BBs. Hop has to be adjusted outside at a minimum of 100ft, so likely wind is an issue as well as overhop. Turn down the hop up to around 20% and work your way up. Can't preset the hop up and expect it to be right on.
|
February 16th, 2010, 09:54 | #8 |
Thank god this isn't about that movie Wanted. Haha.
Yeah, This problem isn't exactly new. My own Well VSR does this too, and i'm sure its because of a faulty barrel. The guns simply weren't good to begin with i'm afraid. |
|
February 16th, 2010, 09:58 | #9 |
Red Wine & Adderall
|
Maybe you have the same problem because you are the same person as the original poster.
A quick IP address comparison confirms so. Duplicate accounts are not allowed.
__________________
"Its only a little bit on fire" |
|
Bookmarks |
|
|