Best suited Silencer for P90?

[Short Round]

Originally Posted by Mitchell12

How do you put a mag in that?

Its that M4 Magazine on the side of the gun I think, then again as from the image below, i dont know if the actual P90 mag can fit in there still.

[Skruface]

King Arms Gemtech SP90:

http://redwolfairsoft.com/redwolf/ai...l?prodID=17157

[Short Round]

Originally Posted by Skruface

King Arms Gemtech SP90:

http://redwolfairsoft.com/redwolf/ai...l?prodID=17157

Thanks, if anyone knows where I can buy a Bravo 552 EOTech Replica Holosight and Echo1 EOTech Lens Protector please post

[FOX_111]

The stock TM silencer that come with the TR model work very well in supressing the sound of the gun.

It screw on the flash hider tread (removing the flash hider first).

If anything, don't put a long silencer.

For 2 reasons:

1- The P90 is a short subgun, having a long can make it look stupid.
2- Depending on your hopup and fps, you could end uphaving BBs hit the inside the the front part of the supressor. Resulting in denting the can and breaking your gun eventually.

[Azathoth]

I havent noticed any problems with my short barrel + Supressor setup at all hopup adjustment levels that is both with my 420FPS gearbox for field use and my stock gearbox for cqb. The exit port on the Madbull gemtech is larger than a BB

I agree with the long supressors. The gemtech is a much larger diameter than the P90TR supressor but the distance it sticks out from the body of the gun is similar as the Gemtech screws onto the suppressor. anything more than 8-10cm is pushing it

[Short Round]

are there any silencers that will screw on to the Flash hider you get with the gun?

[ILLusion]

Nope.

Would highly recommend a GB-Tech or King Arms SP90 replica. It's the *only* suppressor you should be getting for a P90, if you want to build an accurate replica.

[Kos-Mos]

Been using a G5 for quite some time on mine.

It is a killer.

I did not extend the inner barrel inside.

And I can tell you that the sound signature is almost nonexistent.

You will find that the gun does makes a lot of noise, but from the receiving end, all you can hear is the BB hitting you.

Also useful for CQB/close places. Press, twist, pull and voila! Shorter rifle.

Check in my signature, the pictures are in the AWB link.

[Short Round]

Originally Posted by Kos-Mos

Been using a G5 for quite some time on mine.

It is a killer.

I did not extend the inner barrel inside.

And I can tell you that the sound signature is almost nonexistent.

You will find that the gun does makes a lot of noise, but from the receiving end, all you can hear is the BB hitting you.

Also useful for CQB/close places. Press, twist, pull and voila! Shorter rifle.

Check in my signature, the pictures are in the AWB link.

THat looks amazing, I didn't know you could use the p90 extention barrel with a silencer

[Kos-Mos]

You can't.

This one is a custom made one.

Not what I wanted in the end, and got some issues with the maker.

But the silencer is one setup.
The longer outer + flashhider/comp. is an other.

[Short Round]

oh, well its still sounds/looks like an amazing setup.