June 20th, 2015, 17:57 | #91 |
The radio in question is the Puxing PX-777. I had it out today and had one of the guys at "my home field" program one frequency into it. It worked great. What I'd like now is a list of all the common frequencies, any channels that they go by and a good tutorial on all its functions. I'll check YouTube and Google.
|
|
June 20th, 2015, 19:50 | #92 |
2 Cent Tactical
|
Post 1 of this thread has a list of the frequencies that are used.
There will be plenty of tutorials on programming the radio on YT, the owners manual is a bit engrishly but it is understandable as well.
__________________
|
July 15th, 2015, 20:07 | #93 |
programming radio
just found this programme it does all model of radio
small and very comprehensive to work CHIRP http://chirp.danplanet.com/projects/chirp/wiki/Home |
|
July 15th, 2015, 22:40 | #94 | |
Oh we do hate you, just never felt like wasting the time to give you a user title :P
|
Yeah the 777 is a bit of a pain because you have to connect to a pic or another radio (i think they can do that) to program it. That's why I like my 888 and my beofeng uvr-5 you can program em right on the keypad.
If you have the cable then a lot of the soft wear will have the channel list alrdy in them (or you can find pre built list files for them) or you can tweak the settings a bit or enter them all yourself.
__________________
Quote:
FinchFieldAirsoft |
|
July 21st, 2015, 19:52 | #95 |
I grabbed a Baofeng GT-3. Should all of the frequencies loaded be adequate? Great read in this thread. Just wondering if there is a preset patch I can load into the radio or if it's alright where it is now.
|
|
July 21st, 2015, 23:43 | #96 |
Depends on what you mean by "adequate". I'm going to assume you mean basic FRS/GMRS channels.
Here is a very useful chart (it's also referenced on the 1st page of this thread). You can check the frequencies set on your GT-3 and compare to these ones. Personally, I printed a similar chart out with also frequencies of blister pack radios, laminated it, and keep it with my kit. |
|
July 22nd, 2015, 05:36 | #97 | |
Quote:
|
||
September 10th, 2015, 16:06 | #98 |
LUser Title
|
Does anyone know if the SRS Kenwood PTT is able to work with the repro headsets in a Baofeng radio?
Right now Im unable to get them to work together, and I dont really have the cash to buy a real set of sordins. |
June 1st, 2016, 23:50 | #99 |
i have a boafeng radio and a repro ptt. but they wont work together. I have found that if i dont plug the ptt all the way in the radio, it works.
what can do that? |
|
June 13th, 2016, 21:42 | #100 |
ok, thanks for the help, I found my answer alone.
but I have an other question. I have enter the frequencies listed in this post in 2 radios. those radios can communicate togeter but I wasnt able to talk to others? how come? |
|
June 13th, 2016, 22:35 | #101 |
Are you sure the other radios have the same frequency programmed? My guess would be the radio you tried to talk to still had factory frequencies. But I'm no radio expert and I could be wrong.
|
|
June 13th, 2016, 23:10 | #102 |
I was at a big event. I supposed that they had the good frequencies. :|
|
|
June 14th, 2016, 02:03 | #103 |
LUser Title
|
Getting your radio to work with others is more than just tuning to the right frequency. There are other settings like the offset which tells your radio what frequency to listen on vs. which one to transmit on.
I suggest either learning to program your radio manually by following a guide (there are dozens on YouTube) or going out and buying the programming cable and using chirp software to set up multiple channels. Sent from my Nexus 5 using Tapatalk |
June 14th, 2016, 11:36 | #104 |
I highly recommend chirp for any amateur radio user. You can actually see what you are doing and using a keyboard is much easier than navigating the tiny buttons on a radio to program
just do a google search for chirp radio. It gets regular updates for pretty much any radio manufactured today Last edited by Jaeger_CDN; June 14th, 2016 at 11:40.. |
|
July 12th, 2016, 17:07 | #105 |
Problem is CHIRP doesn't seem to support my radios. Two Baofengs, a BF777S and a BF-F8+ and CHIRP doesn't see either.
Then again it's recently come into question about the quality of programming cord I have. AliExpress, y'know... |
|
|
Bookmarks |
Thread Tools | |
|
|