Crye JPC

R711 · November 3rd, 2014, 12:36

You have to understand gentleman, this item was designed to be used by units who put the item under high stress for short durations. These same units also have big enough budgets to use some of these items as disposables, there fore the manufactures make them to the requirements that are asked by these units. There are other parts of the load carrying system that are designed that away, for decam and other such exposures while on the job, ie the JPC, some of the BFG mg pouches etc.
R711

SuperHog · November 3rd, 2014, 16:24

Expensive for a disposable.

SuperHog · November 3rd, 2014, 19:24

Quote:

Originally Posted by -Per-

Same plant but the fabric is not the same. 500D for Modi and 1000D Cordura for Flyye.

Don't know about Toronto area (Don't think there's one) but here is where I bought mine.
http://www.shootercbgear.com/index.p...acturers_id=31

Any other company selling the MODI other than Shootercbgear?

-Per- · November 3rd, 2014, 20:30

Quote:

Originally Posted by SuperHog

Any other company selling the MODI other than Shootercbgear?

Don't know any but Shootercbgear is completely trustable.

SuperHog · November 3rd, 2014, 22:24

I already sent them three emails last week. Zero reply.

If I don't hear back, I plan on buying direct from Flyye and save the hassle. Unfortunately not a single airsoft dealer in Canada carries either Modi or Flyye.

ericwilliam · November 4th, 2014, 17:27

Quote:

Originally Posted by Syiniyed

Crye JPCs do not have lifetime but I'm pretty sure they have a one-year warrentee provided you are the original buyer.

I loved my JPC and I did not feel like there were any points in build quality that were lacking.

If I invest in crye again I might get an AVS as many of my friends claim AVS' are JPCs but better if set up correctly

AVS, 100% yes.

I swapped my JPC out for an AVS, and haven't looked back. the AVS is absolutely unbeatable (In the plate carrier build, no harness).

-=ArchAngel=- · November 5th, 2014, 01:51

Quote:

Originally Posted by ericwilliam

AVS, 100% yes.

I swapped my JPC out for an AVS, and haven't looked back. the AVS is absolutely unbeatable (In the plate carrier build, no harness).

and how much more did it cost? hahaah

Sequential · November 5th, 2014, 02:01

People think that the TMC replica is the same as the Emerson, they are wrong.
I have the Emerson JPC, and it is indeed higher quality then the TMC.

Here's a photo of mine. Long live JPC. I really like the lightweight and manoeuvrability with it.

SuperHog · November 5th, 2014, 11:28

If you had a choice between TMC, Lancer, Emerson, MODI or Flyye, which would you choose?

Ninja_En_Short · November 5th, 2014, 11:53

Emerson.
Flyye is good as well but after comparison they're way too pricy for the quality which is equivalent to Emerson.
Another brand I started using a few months ago is Shark Gear. Again equivalent in quality and aggressive pricing (I think it may be an offshoot of Pantac since that had almost identical catalog on day one).

FOX_111 · November 5th, 2014, 13:26

If you want a replica of the real thing, the MODI is the better match. The quality is also very good. I compared it with a Crye JPC and it share a lot of similarities.

Sequential · November 5th, 2014, 14:38

Quote:

Originally Posted by Ninja_En_Short

Emerson.
Flyye is good as well but after comparison they're way too pricy for the quality which is equivalent to Emerson.
Another brand I started using a few months ago is Shark Gear. Again equivalent in quality and aggressive pricing (I think it may be an offshoot of Pantac since that had almost identical catalog on day one).

+1 on the Emerson, if you guys ever seen the Emerson 1000D pouches they are made strong! I use them to carry my GBBR mags.

SuperHog · November 5th, 2014, 14:56

Quote:

Originally Posted by Sequential

+1 on the Emerson, if you guys ever seen the Emerson 1000D pouches they are made strong! I use them to carry my GBBR mags.

So is the Emerson 1000D now better than the Flyye 1000D?

-Per- · November 5th, 2014, 15:04

Stick with Modi or Flyye. Real close to the Crye JPC.

Just look at the shoulders straps. Emerson, TMC and the others use some kind of fabric or cheap material. Modi and Flyye use laser cut Hypalon, exactly like the real JPC.

SuperHog · November 5th, 2014, 15:46

Quote:

Originally Posted by -Per-

Stick with Modi or Flyye. Real close to the Crye JPC.

Just look at the shoulders straps. Emerson, TMC and the others use some kind of fabric or cheap material. Modi and Flyye use laser cut Hypalon, exactly like the real JPC.

Just ordered a Flyye JPC direct from Flyye. Strange how Canadian dealers prefer selling the other repro versions like Emerson,TMC or Lancer.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

November 3rd, 2014, 22:24	#50
SuperHog Trader rating Join Date: Jul 2011 Location: Toronto, Ontario	I already sent them three emails last week. Zero reply. If I don't hear back, I plan on buying direct from Flyye and save the hassle. Unfortunately not a single airsoft dealer in Canada carries either Modi or Flyye. Last edited by SuperHog; November 3rd, 2014 at 22:34..

November 5th, 2014, 02:01	#53
Sequential Trader rating Join Date: Sep 2007 Location: HKG.YYZ.NRT	People think that the TMC replica is the same as the Emerson, they are wrong. I have the Emerson JPC, and it is indeed higher quality then the TMC. Here's a photo of mine. Long live JPC. I really like the lightweight and manoeuvrability with it. __________________

November 5th, 2014, 11:53	#55
Ninja_En_Short Trader rating Join Date: Jul 2007 Location: France, Canada (Montréal)	Emerson. Flyye is good as well but after comparison they're way too pricy for the quality which is equivalent to Emerson. Another brand I started using a few months ago is Shark Gear. Again equivalent in quality and aggressive pricing (I think it may be an offshoot of Pantac since that had almost identical catalog on day one). __________________ Tous les jours nous nous endormons plus instruits mais pas forcément moins bêtes... I can do a CTRL+ATL+DEL on your gun ! Gun doc in Montreal on AEG, GBB, GBBR and Bolt rifle (gaz and spring) Heavy custom builder (including painting)

November 3rd, 2014, 12:36	#46
R711 Trader rating Join Date: Jan 2003	You have to understand gentleman, this item was designed to be used by units who put the item under high stress for short durations. These same units also have big enough budgets to use some of these items as disposables, there fore the manufactures make them to the requirements that are asked by these units. There are other parts of the load carrying system that are designed that away, for decam and other such exposures while on the job, ie the JPC, some of the BFG mg pouches etc. R711

November 3rd, 2014, 16:24	#47
SuperHog Trader rating Join Date: Jul 2011 Location: Toronto, Ontario	Expensive for a disposable.

November 5th, 2014, 11:28	#54
SuperHog Trader rating Join Date: Jul 2011 Location: Toronto, Ontario	If you had a choice between TMC, Lancer, Emerson, MODI or Flyye, which would you choose?

November 5th, 2014, 13:26	#56
FOX_111 Le Roi des poissons d'avril Trader rating Join Date: Dec 2003 Location: Terrebonne, Québec	If you want a replica of the real thing, the MODI is the better match. The quality is also very good. I compared it with a Crye JPC and it share a lot of similarities. __________________ Vérificateur d'âge: Terrebonne

November 5th, 2014, 15:04	#59
-Per- Trader rating Join Date: Apr 2004 Location: Montreal,Qc	Stick with Modi or Flyye. Real close to the Crye JPC. Just look at the shoulders straps. Emerson, TMC and the others use some kind of fabric or cheap material. Modi and Flyye use laser cut Hypalon, exactly like the real JPC.

Crye JPC

Gear Discussion