This is the KJ 10/22 thread

Strelok · August 16th, 2013, 01:02

Got the local gunstore to bring one in for me, Fits nice! Just had to get rid of the tab on the back of the receiver. Too much filing...

Can real steel aftermarket charging handles work on these things? Not a real fan of the 'tactical' charging handle Ratech offers.

DrunkenTeddy · August 21st, 2013, 03:37

So I ran into a guy who was looking to offload his airsoft stuff, after taking a look at his kwa m93r and kjw kc-02 I made him a lowball offer... and he accepted... So I've stumbled on a KC-02 for dirt cheap, and as it turns out I LOVE THIS GUN.... Both mags I got with it were leaking, but they were extremely simple to fix. After reading all 32(?) pages of this thread I am now stoked to deck this thing out. So I've ordered a pile of crap and totally overspent on a gun I didn't even intend to buy in the first place. This will be my DMR/Sniper, my local field allows up to 450 fps so I will be aiming for 430-440 range. Even though it seems to shoot close to there already... Based on the advice of a few here I've ordered an RA tech hop up bucking, 380mm tb barrel, and a NPAS. I've also ordered a scope, bipod, a new butt stock, and 5 30rd mags. It's too bad summer is almost over and I may not have the parts or mags to play it until September sometime, which could mean it's a less effective gun depending on how quickly the weather goes back to cold.

I will of course post some pictures when I complete my build, but so far this gun seems right up my alley.

DrunkenTeddy · August 21st, 2013, 18:03

Anybody got a trick for speed loading these short mags? I thought about tying fishing line to the bottom of the spring so I could pull it down and more easily load it but I'm pretty sure that would require 3 hands...

Laurel · March 22nd, 2014, 16:47

Has anybody removed the front sling mount on this? Would like to kmow! Ty

T-Hell · March 22nd, 2014, 16:48

Yep removed mine and the rails on the bottom and sides make the gun much more easy to hold...

Laurel · March 22nd, 2014, 16:53

How is it done? Its flappy and noisy... do I need to take it apart? This is my first GBB so im sweating doing so.

timmah · March 24th, 2014, 06:59

There are two screws you need to remove, and then its right there. The screws are: 1x at the back of the receiver, and 1x right in front of the magwell. Remove them, lift the barrel and then you can get to the nut that holds the sling swivel in place...

Laurel · March 24th, 2014, 09:33

Quote:

Originally Posted by timmah

There are two screws you need to remove, and then its right there. The screws are: 1x at the back of the receiver, and 1x right in front of the magwell. Remove them, lift the barrel and then you can get to the nut that holds the sling swivel in place...

Yep, I did it last night... I just took it apart & it was rather quick. Thank you!

Laurel · April 4th, 2014, 16:20

Does anyone know who or where I can order RA tech parts for the KC02... everywhere I have looked in country is sold out or not carried... I am seriously thinking of ordering from evike now plus some mags...

T-Hell · April 5th, 2014, 00:26

What are you looking for. I have a bunch of ratech steel parts I never got around to installing I was about to put up for sale. Pm me will discuss

Datawraith · June 11th, 2015, 10:55

Time to revive this thread!

Just bought a used stock KC02 and was planning on overhauling it.

After reading all 31 pages of this thread a few times, I decided to go with the following upgrades:
-RA-Tech 6.01mm Stainless Steel Tightbore – 380mm
-RA-Tech Hop-Up Rubber
-RA-Tech NPAS
-PRS Stock
-WA GBBR G27 Grip

What are your opinions on the above?

Does anybody know if ASD's PRS AEG Simplified stock will work on the KC02 and also if MP5 pouches will fit the long mags?

Finally, how have your rifles held up after a few years (if you didn't sell them)?

Thanks all.

naminator · June 11th, 2015, 11:42

Quote:

Originally Posted by Datawraith

Time to revive this thread!

Just bought a used stock KC02 and was planning on overhauling it.

After reading all 31 pages of this thread a few times, I decided to go with the following upgrades:
-RA-Tech 6.01mm Stainless Steel Tightbore – 380mm
-RA-Tech Hop-Up Rubber
-RA-Tech NPAS
-PRS Stock
-WA GBBR G27 Grip

What are your opinions on the above?

Does anybody know if ASD's PRS AEG Simplified stock will work on the KC02 and also if MP5 pouches will fit the long mags?

Finally, how have your rifles held up after a few years (if you didn't sell them)?

Thanks all.

That all sounds decent. I went the VSR chamber route and put and Orga wide bore in my gun with a Maple leaf bucking.

Time will tell I guess.

At any rate, the best mag pouches for the KC02 are M4 pouches (2 fit snug) double stack pistol mag pouches (snug fit) open top Pistol Tacos (apparently one of the best options).

I would think a standard MP5 mag pouch would be too long.

BioRage · June 11th, 2015, 11:46

I would stay far away from RA-Tech, but that's just me :P.

Datawraith · June 11th, 2015, 14:22

@naminator: I've also heard that 40mm grenade pouches work too, but all of those would feel pretty bulky because I'm planning on using that in a drop leg setup, so I was hoping that MP5/MP7/UMP pouches would work. If the pouches are too long but the mags fit in, then I'd just rig something on the bottom of the pouch to stop the mags from slipping too deep.

Do you know if a AEG PRS stock could be mounted to a KC02?

@BioRage: What's wrong with RA-Tech? Most of the guys on the forums (not just ASC, but the others as well) say that the RA-Tech rubber and barrel are great on the KC02.

BioRage · June 11th, 2015, 14:31

I would choose Falcon inner over the RA-Tech inner, but that's me.

I stay away from RA-Tech, it gave me issues on my LM4 back in the day, and I've seen them in person mess up with their WE line (SCAR/M4), and their NPAS is quite in-consistent, however, I am not familiar with the KC-02 platform, just thought I'd mention it.

I run a Falcon inner with rubber now on my KJW P-09 and it's amazing.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 22nd, 2014, 16:48	#455
T-Hell Trader rating Join Date: Jul 2008 Location: Winnipeg Manitoba	Yep removed mine and the rails on the bottom and sides make the gun much more easy to hold... __________________ Tim Rhino Living http://www.nordicbattlegroup.ca

April 5th, 2014, 00:26	#460
T-Hell Trader rating Join Date: Jul 2008 Location: Winnipeg Manitoba	What are you looking for. I have a bunch of ratech steel parts I never got around to installing I was about to put up for sale. Pm me will discuss __________________ Tim Rhino Living http://www.nordicbattlegroup.ca

August 16th, 2013, 01:02	#451
Strelok Trader rating Join Date: Jun 2006 Location: Brandon Manitoba	Got the local gunstore to bring one in for me, Fits nice! Just had to get rid of the tab on the back of the receiver. Too much filing... Can real steel aftermarket charging handles work on these things? Not a real fan of the 'tactical' charging handle Ratech offers.

August 21st, 2013, 03:37	#452
DrunkenTeddy FatJ Trader rating Join Date: Sep 2006 Location: Langley, BC	So I ran into a guy who was looking to offload his airsoft stuff, after taking a look at his kwa m93r and kjw kc-02 I made him a lowball offer... and he accepted... So I've stumbled on a KC-02 for dirt cheap, and as it turns out I LOVE THIS GUN.... Both mags I got with it were leaking, but they were extremely simple to fix. After reading all 32(?) pages of this thread I am now stoked to deck this thing out. So I've ordered a pile of crap and totally overspent on a gun I didn't even intend to buy in the first place. This will be my DMR/Sniper, my local field allows up to 450 fps so I will be aiming for 430-440 range. Even though it seems to shoot close to there already... Based on the advice of a few here I've ordered an RA tech hop up bucking, 380mm tb barrel, and a NPAS. I've also ordered a scope, bipod, a new butt stock, and 5 30rd mags. It's too bad summer is almost over and I may not have the parts or mags to play it until September sometime, which could mean it's a less effective gun depending on how quickly the weather goes back to cold. I will of course post some pictures when I complete my build, but so far this gun seems right up my alley.

August 21st, 2013, 18:03	#453
DrunkenTeddy FatJ Trader rating Join Date: Sep 2006 Location: Langley, BC	Anybody got a trick for speed loading these short mags? I thought about tying fishing line to the bottom of the spring so I could pull it down and more easily load it but I'm pretty sure that would require 3 hands...

March 22nd, 2014, 16:47	#454
Laurel a.k.a. mak11 Trader rating Join Date: Jul 2003 Location: Toronto, Ontario	Has anybody removed the front sling mount on this? Would like to kmow! Ty

March 22nd, 2014, 16:53	#456
Laurel a.k.a. mak11 Trader rating Join Date: Jul 2003 Location: Toronto, Ontario	How is it done? Its flappy and noisy... do I need to take it apart? This is my first GBB so im sweating doing so.

March 24th, 2014, 06:59	#457
timmah Trader rating Join Date: Apr 2013	There are two screws you need to remove, and then its right there. The screws are: 1x at the back of the receiver, and 1x right in front of the magwell. Remove them, lift the barrel and then you can get to the nut that holds the sling swivel in place...

April 4th, 2014, 16:20	#459
Laurel a.k.a. mak11 Trader rating Join Date: Jul 2003 Location: Toronto, Ontario	Does anyone know who or where I can order RA tech parts for the KC02... everywhere I have looked in country is sold out or not carried... I am seriously thinking of ordering from evike now plus some mags...

June 11th, 2015, 10:55	#461
Datawraith Trader rating Join Date: Oct 2014 Location: Markham	Time to revive this thread! Just bought a used stock KC02 and was planning on overhauling it. After reading all 31 pages of this thread a few times, I decided to go with the following upgrades: -RA-Tech 6.01mm Stainless Steel Tightbore – 380mm -RA-Tech Hop-Up Rubber -RA-Tech NPAS -PRS Stock -WA GBBR G27 Grip What are your opinions on the above? Does anybody know if ASD's PRS AEG Simplified stock will work on the KC02 and also if MP5 pouches will fit the long mags? Finally, how have your rifles held up after a few years (if you didn't sell them)? Thanks all.

June 11th, 2015, 11:46	#463
BioRage Trader rating Join Date: Nov 2008 Location: Toronto	I would stay far away from RA-Tech, but that's just me :P.

June 11th, 2015, 14:22	#464
Datawraith Trader rating Join Date: Oct 2014 Location: Markham	@naminator: I've also heard that 40mm grenade pouches work too, but all of those would feel pretty bulky because I'm planning on using that in a drop leg setup, so I was hoping that MP5/MP7/UMP pouches would work. If the pouches are too long but the mags fit in, then I'd just rig something on the bottom of the pouch to stop the mags from slipping too deep. Do you know if a AEG PRS stock could be mounted to a KC02? @BioRage: What's wrong with RA-Tech? Most of the guys on the forums (not just ASC, but the others as well) say that the RA-Tech rubber and barrel are great on the KC02.

June 11th, 2015, 14:31	#465
BioRage Trader rating Join Date: Nov 2008 Location: Toronto	I would choose Falcon inner over the RA-Tech inner, but that's me. I stay away from RA-Tech, it gave me issues on my LM4 back in the day, and I've seen them in person mess up with their WE line (SCAR/M4), and their NPAS is quite in-consistent, however, I am not familiar with the KC-02 platform, just thought I'd mention it. I run a Falcon inner with rubber now on my KJW P-09 and it's amazing.

This is the KJ 10/22 thread

Airsoft Guns Discussion