KWC Desert Eagle vs TM Desert Eagle?

[Dart]

Originally Posted by Crunchmeister

KWC have a reputation for basically falling apart after minimal use, and replacement parts aren't available as TM parts, if at all. As much as I'd like more metal on my gun, when I do get a Deagle, it will be a TM. Unless some other reputable company company like KSC / KWA starts making one.

welll than..... wish I had read that in atleast one review before I purchased this one. I thought I had over researched my choice.....

Eh we will see what happens, if it falls apart I guess shit happens

[aZn_triXta07]

You can purchase full Deagle kits made by Creation (Black and Chrome)

RA-TECH also has their own kits.

[cckeong]

I am searching long time can't get it.
Need 50AE-3 and 50AE-15
Please send me a mail to ck_chin@streamyx.com

[R.I.T.Z]

owned a Chrome TM hardkick 50AE model
on duster its week and sounds rather unimpressive
on propane it kicks hard has great accuracy for a pistol and makes a good sound.
the hop up is easily accessible and thought the lower frame is plastic the upper is metal, after i took it apart, the internals some are plastic and some parts metal.
one thing i had noticed is that the loading nozzle has a tendency of wearing out when using propane so watch out its not a immediate problem, but down the road if something stops working get a new nozzle would be my first recommendation. the weight is only about 150grams off the original, the gun has trades on it and yes of course it says Tokyo Marui on it, but in general i found the gun exceptionally fun to use. now for you all who say its a useless gun to field because it still shoots the same 6mm round as every other pistol, you can get the same results from blowing BB's out of a straw, you buy it for the looks(and reliability in some cases) just like most other guns. now the TM desert eagle is a great feeling and sounding gun im my opinion and those who have used mine. and the 27 round clip doesn't hurt :P

[Quantumfart]

Compairison:
TM Desert Eagle.50AE HardKick:
Metal parts: most internal parts, trigger, safety, slidelock/release, takedown switch, mag, Iron Sights.
Plastic/ABS: Frame,Slide, Grip, and a few other minor parts
the Barrell i belive is metal but i cannot be 100% sure
Weight (unloaded) around 1.5 pounds
Quality: id give it a 3.8/5. its a hand cannon and the lame weight just dosent cut it seems decent, fiar accuracy readily avalible parts. but a vast amount of the gun is plastic (Stock)
Avilability: 4.5/5 i have noticed almost the only place you cannot get on is Canada which made me mad. however its pretty cheap everywhere else
Gas Use: around 40 .20g bbs on 1 fill (give or take, temprature)
Price: Average id say around $130USD
Accuracy: about a 2.5" spread at 50feet with .20g bbs

Overall: 3.8/5 Large parts are plastic, unavilable in canada and other countries, dosent feel like the real steel counterparts (I have handled/fired Both .50AE)


KWC Desert Eagle.50AE NEW MODEL Co2
Metal Parts: Most internal parts, Barrell, Slide, trigger, hammer, Iron Sights, Slide Lock/Release, Mag release, Mag, Takedown switch.
Plastic parts: lower Reciver (reinforced ABS) Grip, a few internal parts
Weight: (Unloaded) around 2.5 Pounds
Quality: I cannot Properly rate this as i have yet to actually use it but from everything i have seen id say around 4/5 to a 4.4/5 the weight is very similar to that of its real steel counterparts
Availability: i have seen this new model on Almost every US airsoft site. i have seen this on a few canadian sites more and more are showing up as weeks pass
Gas Use: Co2 around 40 .25g bbs on one 12gram cell Green Gas around 40 .20g bbs on one fill (give or take, temp)
Price: Average id say around $150USD
Accuracy: about 1.5" to 1.8" spread at 50 with .20g bbs

Overall: 4.5/5 Vast amount of the gun is metal, it feels like the real gun sound is very hevy metal lots of snap to it(large amount of reviews i have watched) its widely avilable thoughout North america and other places, and i have no idea why the hell one would need it but this gun has a Fully automatic feature, the barrel is a Negitive thread for supressor, or w/e you can use it for
for a better rate on this gun i will only say after i have used this model.

so tm fan or not if you are after the better ban for your buck KWC will take first. i do have to say TM makes some really good airsoft guns
but KWC takes fisrt.

I will have a better conclution soon enough hopefully buy this friday (Sept 24 2010) when i actually get it ;D

[Quantumfart]

Originally Posted by Quantumfart

Compairison:
TM Desert Eagle.50AE HardKick:
Metal parts: most internal parts, trigger, safety, slidelock/release, takedown switch, mag, Iron Sights.
Plastic/ABS: Frame,Slide, Grip, and a few other minor parts
the Barrell i belive is metal but i cannot be 100% sure
Weight (unloaded) around 1.5 pounds
Quality: id give it a 3.8/5. its a hand cannon and the lame weight just dosent cut it seems decent, fiar accuracy readily avalible parts. but a vast amount of the gun is plastic (Stock)
Avilability: 4.5/5 i have noticed almost the only place you cannot get on is Canada which made me mad. however its pretty cheap everywhere else
Gas Use: around 40 .20g bbs on 1 fill (give or take, temprature)
Price: Average id say around $130USD
Accuracy: about a 2.5" spread at 50feet with .20g bbs

Overall: 3.8/5 Large parts are plastic, unavilable in canada and other countries, dosent feel like the real steel counterparts (I have handled/fired Both .50AE)


KWC Desert Eagle.50AE NEW MODEL Co2
Metal Parts: Most internal parts, Barrell, Slide, trigger, hammer, Iron Sights, Slide Lock/Release, Mag release, Mag, Takedown switch.
Plastic parts: lower Reciver (reinforced ABS) Grip, a few internal parts
Weight: (Unloaded) around 2.5 Pounds
Quality: I cannot Properly rate this as i have yet to actually use it but from everything i have seen id say around 4/5 to a 4.4/5 the weight is very similar to that of its real steel counterparts
Availability: i have seen this new model on Almost every US airsoft site. i have seen this on a few canadian sites more and more are showing up as weeks pass
Gas Use: Co2 around 40 .25g bbs on one 12gram cell Green Gas around 40 .20g bbs on one fill (give or take, temp)
Price: Average id say around $150USD
Accuracy: about 1.5" to 1.8" spread at 50 with .20g bbs

Overall: 4.5/5 Vast amount of the gun is metal, it feels like the real gun sound is very hevy metal lots of snap to it(large amount of reviews i have watched) its widely avilable thoughout North america and other places, and i have no idea why the hell one would need it but this gun has a Fully automatic feature, the barrel is a Negitive thread for supressor, or w/e you can use it for
for a better rate on this gun i will only say after i have used this model.

so tm fan or not if you are after the better ban for your buck KWC will take first. i do have to say TM makes some really good airsoft guns
but KWC takes fisrt.

I will have a better conclution soon enough hopefully buy this friday (Sept 24 2010) when i actually get it ;D

OK, so after a good 1 and a little years, i still have the KWC, and i gotta say I love it, Parts in Canada little hard to find (metal kits, and what Not) but i have not had One miss fire, or any problem with this. I have shot well over 5000 rounds through it and it still runs in pristine order, so the fact the KWC "falls" apart after minimal use, in my opinion is load of turds, (unless minimal shooting is like 20K rounds) However I do preform regular maintainance and keep her nice and clean just like you would on a real firearm. so for anyone whos actually reading this, Despite who says what about TM, or KWC, Get what feels right to you. Although there same models, they will feel different.

[IKJ]

how long a weapon lasts is more about maintainance than it is the company that made it. my last pistol was a TM HC, that eventualy died of a common but undiscussed fault. if you do not lube the TM after every use with propane you WILL shatter the blowback housing. this is the piece of metal inside the slide of the pistol that sits at the back of the mechanism, it is also one of 3 metal parts within the slide that are not made of steel. CO2 is not really viable here in the uk due to site limits but i am curious bout the FPS of the KWC,

[Quickscopes97]

Where can I buy a kwc desert eagle in Canada I've been looking everywhere but couldnt find one. Can someone help me?

[R.I.T.Z]

Originally Posted by Quickscopes97

Where can I buy a kwc desert eagle in Canada I've been looking everywhere but couldnt find one. Can someone help me?

here

http://airsoftcanada.com/showthread.php?t=49408

[Quickscopes97]

I don't understand that just lead me n how to get age verified are there any stores that sell the kwc cybergun desert eagle 50 ae?

[Curo]

We cannot tell you unless you are Age Verified.

Thats why the link takes you there.

Sorry thems the breaks...

Also side note...

I hope you know you cannot Quickscope in airsoft. Aswell as I hope 97 isn't a reference to a birth year of 1997...

[Quickscopes97]

It's not it's the year my son was born and my favorite number

[Curo]

ahh ok, Well then getting Age verified shouldn't be a problem! Getting Age verified confirms many things to the community. Including giving you access to the ASC classifieds allowing you to buy and sell guns/parts Aswell as letting you see the sites extensive list of retailers.

But remember once you get age verified no one can tell you this information outside of an Age Verified section. As if none AV'd (Age Verified) people can see the information that would defeat the purpose no?

EDIT: Fill in your location and we can help you easily find a local Age Verifier (People who handle confirming peoples Ages)