Hi-Capa Gold Match Slide Stop

N_Force · September 26th, 2015, 15:58

Nice. Good luck.

Side note:
If you want to keep the life time of the slide lock longer, DON'T just release it when locked empty, PULL SLIDE BACK instead and let the slide stop dropping itself rather than pushing the slide stop down making worn more. Try it. It helps!

Sticksquad · September 26th, 2015, 16:58

Quote:

Originally Posted by N_Force

Nice. Good luck.

Side note:
If you want to keep the life time of the slide lock longer, DON'T just release it when locked empty, PULL SLIDE BACK instead and let the slide stop dropping itself rather than pushing the slide stop down making worn more. Try it. It helps!

Noted with thanks 👌🏻👍🏻

Sent from my iPhone using Tapatalk

Sticksquad · September 27th, 2015, 05:21

Apply on this side ? Because this side in between the slide to increase the thickness

Sent from my iPhone using Tapatalk

Sticksquad · September 27th, 2015, 05:35

Sent from my iPhone using Tapatalk

Sticksquad · September 27th, 2015, 06:53

Already applied but still it wont lock..

N_Force · September 27th, 2015, 07:44

Yes, apply thin layer of glue on this side ONLY.

Quote:

Originally Posted by Sticksquad

Apply on this side ? Because this side in between the slide to increase the thickness

Sent from my iPhone using Tapatalk

N_Force · September 27th, 2015, 07:46

No, you don't need any glue here, it may create friction and no good for smooth sliding, clean it up.

Quote:

Originally Posted by Sticksquad

Sent from my iPhone using Tapatalk

N_Force · September 27th, 2015, 07:48

Should not see any glue here.

Quote:

Originally Posted by Sticksquad

Already applied but still it wont lock..

N_Force · September 27th, 2015, 08:00

How to increase thickness on the wall of slide

This mod could enforced the wall of the slide stronger to fix the slide stop and minimize the chance for the slide off track and trigger pull not engaged after 500 rounds-cycle-slide-stop.

The point of the screw driver shows the space(thickness increased) that created by after applying blue glue.

The space between slide and metal piece should allow a tip of a blade fit in, that's the space added for increase the thickness of the wall.

Other angle viewing....

Important: once you applied blue glue (gasket maker, after harden and still soft and flexible) and put back the metal piece to slide, screw it tie, give a bit pressure on the metal piece to keep close to slide, then insert the tip of the blade to ensure you have the thinner space has already created. Now YOU HAVE TO WAIT 24HOURS TO LET IT HARDEN DRY BEFORE TESTING IT.
When first insert the slide back to mid frame, it should be a bit tie fit and smooth movement, gently pull the middle of the slide and it should hold tide in place and not slide off track. That's the way testing it for best fit after mod.

Hope this instruction helps!

Sticksquad · September 27th, 2015, 08:20

owh my fault.. hehe alright will apply glue there... thank you

Sticksquad · September 28th, 2015, 07:31

You are genius! I owe u my friend.. Its working now 👍🏻👍🏻👍🏻😉😉😉

Thank you so much for you passion help

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

September 26th, 2015, 15:58	#31
N_Force Trader rating Join Date: Oct 2006 Location: Toronto, Ontario	Nice. Good luck. Side note: If you want to keep the life time of the slide lock longer, DON'T just release it when locked empty, PULL SLIDE BACK instead and let the slide stop dropping itself rather than pushing the slide stop down making worn more. Try it. It helps! __________________ aka Uncle

September 27th, 2015, 08:00	#39
N_Force Trader rating Join Date: Oct 2006 Location: Toronto, Ontario	*How to increase thickness on the wall of slide* This mod could enforced the wall of the slide stronger to fix the slide stop and minimize the chance for the slide off track and trigger pull not engaged after 500 rounds-cycle-slide-stop. The point of the screw driver shows the space(thickness increased) that created by after applying blue glue. The space between slide and metal piece should allow a tip of a blade fit in, that's the space added for increase the thickness of the wall. Other angle viewing.... Important: once you applied blue glue (gasket maker, after harden and still soft and flexible) and put back the metal piece to slide, screw it tie, give a bit pressure on the metal piece to keep close to slide, then insert the tip of the blade to ensure you have the thinner space has already created. Now YOU HAVE TO WAIT 24HOURS TO LET IT HARDEN DRY BEFORE TESTING IT. When first insert the slide back to mid frame, it should be a bit tie fit and smooth movement, gently pull the middle of the slide and it should hold tide in place and not slide off track. That's the way testing it for best fit after mod. Hope this instruction helps! __________________ aka Uncle Last edited by N_Force; September 27th, 2015 at 16:32..

September 27th, 2015, 05:21	#33
Sticksquad Trader rating Join Date: Sep 2015 Location: kuala lumpur	Apply on this side ? Because this side in between the slide to increase the thickness Sent from my iPhone using Tapatalk

September 27th, 2015, 05:35	#34
Sticksquad Trader rating Join Date: Sep 2015 Location: kuala lumpur	Sent from my iPhone using Tapatalk

September 27th, 2015, 06:53	#35
Sticksquad Trader rating Join Date: Sep 2015 Location: kuala lumpur	Already applied but still it wont lock..

September 27th, 2015, 08:20	#40
Sticksquad Trader rating Join Date: Sep 2015 Location: kuala lumpur	owh my fault.. hehe alright will apply glue there... thank you

September 28th, 2015, 07:31	#41
Sticksquad Trader rating Join Date: Sep 2015 Location: kuala lumpur	You are genius! I owe u my friend.. Its working now 👍🏻👍🏻👍🏻😉😉😉 Thank you so much for you passion help

Hi-Capa Gold Match Slide Stop

Airsoft Guns Discussion