September 23rd, 2009, 17:26 | #16 | |
Official Crybaby Chairsofter
|
Quote:
I know most of the Montreal PTW owners, only 2 had problems. One was very minor, the other was out of his own stupidity. Now after owning a couple and seeing how GREAT they perform, would i respend all that cash? No, it's not worth it with the limited fields/gameplay found here. If i lived in Japan/US with the amazing fields and better weather = absolutely yes. To fully enjoy a PTW you need to play a lot, or else it turns into a (very sexy) multi-thousand dust collector. |
|
September 23rd, 2009, 17:28 | #17 |
Ministry of Peace
|
You know I've never had this problem w/ my '07 SCK PTW. I've been to games where regular AEGs were failing from rain issues. MY PTW gets a coat of chapstick on the top of the lower receiver before each game to repel water, and I have a modified Accu-Wedge to keep things nice and solid.
|
September 23rd, 2009, 17:30 | #18 | |
Official Crybaby Chairsofter
|
Quote:
Iv also played in -25 with ZERO problems while regular AEG's were breaking left and right and batteries were dying up and down. Iv also fallen flat on my PTW and i'll be 100% honest... i was in a lot of pain and the PTW didn't even have a scratch. While i have seen people run around, barrel of their AEG hit a tree, bam AEG is in 2 peices. EDIT: Oh and i wasn't the only PTW owner at those 'rain' games, no problems from them ether AFAIK (or else they woulda come to me with a big 'welp' ). |
|
September 23rd, 2009, 17:30 | #19 | |
Quote:
spoiled I am. But those bling guns were/are of the best in class. A beast of a shotgun and the best pistols ever made. I only invest money in toys that won't break/fail from a proven track record. PTW's and GBBR's have very shaky records. Your PTW is allergic to rain. I don't hate the game or the players, just shitty guns
__________________
Retired — Freedom 35 |
||
September 23rd, 2009, 17:32 | #20 |
I've had my PTW for almost 3 years, It's a 07 SCK Max which I built. It is my primary rifle. The only thing I've ever had to do is get motor reworked, which was a problem right from factory. I use it in the sun, rain and even snow and it has never let me down during a game or skrim, or ever for that matter.
__________________
Zaboroski A. Sergeant Company Pioneer "Alpha" Coy South Manitoba Rifles |
|
September 23rd, 2009, 17:32 | #21 | |
Official Crybaby Chairsofter
|
Quote:
What gives a bad impression is the shit storm that follows a down PTW. It's like a Civic that brakes down, theirs a lot, not much attention, but when a Ferrari breaks done it makes the news and every forum... I bet theirs a LOT more broken civics that Ferrari's also... |
|
September 23rd, 2009, 17:46 | #22 | |
Quote:
That would be true if I was in a specific camp. I hate AEGs just as much as PTWs. Their both equally flawed, just one is a suped version with better features. I like realism so I'm hoping the GBBR is the way of the future. I'm not looking for dirton them, it finds me. The guys I know are always talking about the problems, mods needed and replacement costs. For the rediculous price on them I could have a gold plated AK47... Mmmm I remember seeing Illusion's thread on removing the barrel nut with an armorer's wrench— you'd think Systema would've made the receiver from CNC'd alu/steel instead of cast metal that can't take the pressure. They charge a lot of cash for those crappy receivers. PS Ronan: you do realize that when a CA/TM/G&P needs a part is costs next to nothing. And a Ferrari is a status symbol, is that what you think a PTW is?
__________________
Retired — Freedom 35 Last edited by safx; September 23rd, 2009 at 17:48.. |
||
September 23rd, 2009, 17:49 | #23 |
Tys
|
(Safx...if you think this is too long f*ck off...nicely )
I fielded my '08 PTW at the last FTF game (Battle of the 30). It rained straight through the morning. For our first ambush position we were just hunkered down getting soaked. My PTW was not chapsticked, taped, sealed with waterproofing spray, etc... Just "normal". It was soaked (just like leaving your rifle out in the rain kind of soaked...and I was nervous about it). Not kidding anyone...I was shitting bricks everytime I brought it up and pulled the trigger. I was dreading getting a "dead pull"...and slogging back to the car for my AEG. But that didn't happen. It shot every time. It shot well. For some weird reason at one point in the day it only shot full auto (regardless of setting it to semi or full)...it came back and then went again. That said, with the trigger control possible...it was no issue ripping off 2-3 rnd bursts. When I got home I actually left it packed away in a case for a week...oops. When I went to check on it...it shot fine, both semi and full. A little rusty here and there, but ok. At least the battery wasnt' plugged in. So maybe it's just a lucky one...maybe not. (Safx...if you made it this far...go back up and read the first line...HAHAHAHA) |
September 23rd, 2009, 17:56 | #24 |
"Insert nerd laugh here, preferably Tyson's!"
I read the first line, then the last lol. Started to read that story of yours but I already heard it, seems the tale has been slightly altered. I remember you saying the semi was out most of the day, and you had a serious turtle head poking out all day as well.
__________________
Retired — Freedom 35 |
|
September 23rd, 2009, 17:58 | #25 |
Official Crybaby Chairsofter
|
safx i agree about the upper, but that was due to over torque delta rings. Iv seen RS uppers snap also, not pretty. Oh and i was the one that had to upgrade a lot of PTWs and that over torque delta ring was giving me nightmares (i was scared of breaking them!). At the end i never broke one or crack anything. Patience + proper tools = win.
I love GBBR, i own one + a LOT of parts, i'm trying everything out to see if they are worth it. But heck just the feeling of shooting one puts AEG/PTW's to shame! |
September 23rd, 2009, 18:09 | #26 |
PTW are sexy and I like the idea of "real steel" compatible.
But I would never buy one. Ever! I have AR's ( real steel ) and some a cheaper then most PTW's. And that makes no sence IMO!! If you want to go whit the perfect replica or "the" reel steel feel to your AEG like PTW claim to do, may I suggest you get the licenses and you go buy yourself the real gun instead.
__________________
|
|
September 23rd, 2009, 18:22 | #27 | |
Official Crybaby Chairsofter
|
Quote:
You also suggest to go buy RS for airsoft? I'm glad i don't play with you |
|
September 23rd, 2009, 18:41 | #28 | |
Quote:
The reason is mainly because of their brand name [Systema] and it being a radically different design than the Tokyo Marui. Its speculated that a manufacturing cost of a PTW is close to a hundred dollars. Some steel gears, monkey metal body, electric components not much more sophisticated than your $10 optical mouse... The brand name and the exclusivity of the PTW is the only reason systema can command such a high price on these guns. And why not? As you can see there are plenty of people willing pick one up. Even with canada's price mark up. As far as the exclusivity thing goes, its something that a GBB rifle can also provide. Which is why the PTWs are losing popularity these days.
__________________
Western Arms Infinity 6" Hybrid DX silver Limited Western Arms Infinity 5" Expert KSC MP7A1 KSC USP Match Kimber Warrior [Nova FMU kit] Kimber Gold Combat Stainless [Nova FMU kit] |
||
September 23rd, 2009, 18:42 | #29 | |
Art affectionado
|
Quote:
To go back to the age-old argument, you can't shoot your friends with the real-steel. Systema has succeeded in bringing an unprecedented amount of realism into a milSIM. SIM. |
|
September 23rd, 2009, 18:44 | #30 | |
Quote:
lol... Get the real thing price wise for the range and buy a TM or whatever for airsoft... Of course...
__________________
|
||
|
Bookmarks |
|
|