AEG firing perfectly on semi auto, but has misfeeding problems on full auto

[Gunny_McSmith]

nop i've open the gun,

changed to the old hop up bucking = same problem....
new one = same thing
cleaned the barrel & hop up gunfully= same thing

BTW sorry for the misfeeding on semi auto...my batterie were just low...

but ya I'll buy new mags now....

are the Dboys mags from ebaybaned good?

[Skladfin]

ya its probably the magazine problem.

[Crunchmeister]

Avoid high cap magazines unless they're brand names like TM or CA. The most reliable feeding will usually come from real or low-cap, followed by midcaps. I personally use low and mids, and never had feed problems. The stock JG highcap I got with my 416 is horrible. Doesn't matter what gun I put it in, I have feed problems.

And in the end, you're better off with low and mid caps, because some games won't allow the use of high-cap.

[Non Credo]

1. try it with midcaps. good midcaps. G&P at least.

2. I like how like... styrak suggest something perfectly logical and in response is ignored.. What exactly has been done in the gearbox? How experienced are you with internal work? do you know how to properly set your tappet plate and air nozzle with the cylinder?

3. on a completely unrelated note, some people have no business in those purposefully ripped jeans. just entirely unbecoming. really. damn.

[Gunny_McSmith]

the gun is stock upgraded...I dont have the list, but if you search on google, you'll see (SRC HK416)

have you guys have had any experience with MAG brand magazines, like those...

http://cgi.ebay.com/MAG-M4-M16-HK-Mi...742.m153.l1262

or are the King Arms brand better?

http://cgi.ebay.com/King-Arms-M4-M16...QQcmdZViewItem

[DarkAngel]

SRC is Shite... I had an SRC M4 when i first got into airsoft (when i didnt know better), hell, even the SRC Mag it came with misfeed like a bitch. But it worked fine with every other mag. (untill all the parts started systematically breaking down)

my money is on ur shitty mags

[pusangani]

+1 it's the mag for sure, I have the same issue with a dboys ak74 hi-cap as well, the beginning of the mag when its fully wound nice and tight it will feed flawlessly, but by the time i have to wind it a 2nd time it starts to misfeed

[Gunny_McSmith]

I recently ordered midcap mags from ehobbyasia, just have to wait for them,

[Kos-Mos]

I only had problems with MAG midcaps.

Their real caps are ok, but still nowhere close to some Star.

KA low caps are painfull in most guns, but in some other guns they work perfectly.