|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
August 6th, 2007, 13:32
|
#16 |
|
Official ASC Bladesmith
|
The battery has zero effect on range or fps. The motor has no effect either. Literally, you have to look in the straight line, from rear to front, spring guide, spring, piston/head, cylinder, cylinder head, nozzle, hop up unit, hop up rubber, barrel (clean?).
|
|
|
|
August 6th, 2007, 16:19
|
#17 | ||
|
Official Crybaby Chairsofter
|
Quote:
I'm thinking of tempting faith and opening the mechbox and checking the inside. But theirs something i notice. THe hop up unit isn't attached, the barrel goes in it and then the whole thing just 'plugs' into the front of the mechbox where the nozzle is. Seem's pressure from the being pushed foward (when i attach everything) is the only thing that keeps it togethere. Is that normal?
__________________
Quote:
|
||
|
|
|
|
August 6th, 2007, 19:27
|
#18 | |
|
Official Crybaby Chairsofter
|
I fail at trying to fix my own gun. I can't get the bloody mechbox out of the lower receiver... those 'pins' are impossible to remove wtf...
__________________
Quote:
Last edited by Ronan; August 6th, 2007 at 19:30.. |
|
|
|
|
|
August 6th, 2007, 19:30
|
#19 |
|
Have u tried to follow the instructions at www.mechbox.com
which pins? the body pins? or the center pin? |
|
|
|
|
|
August 6th, 2007, 19:36
|
#20 | |
|
Official Crybaby Chairsofter
|
The one that attaches the mechbox to the SR-25 lower receiver.
__________________
Quote:
|
|
|
|
|
|
August 6th, 2007, 19:37
|
#21 |
|
If u cant tap it out one way using a screw driver, try tapping it out the other way
|
|
|
|
|
|
August 6th, 2007, 19:38
|
#22 | |
|
Official Crybaby Chairsofter
|
I looked at that vid... my mechbox looks different. It's longer, and seems to use different screws at different places.
__________________
Quote:
|
|
|
|
|
|
August 6th, 2007, 19:40
|
#23 |
|
Shouldnt it be a Version 2 gearbox? they should all look the same. did u remove the grip/mag release/stock before trying to take out the center body pin?
|
|
|
|
|
|
August 6th, 2007, 19:42
|
#24 | |
|
Official Crybaby Chairsofter
|
Gonna try that. I just did a test to see how much pressure was comming out the nozzle. Not nearly enough... theirs DEFF something fucked up inside the mechbox. Big air leak i'm guessing.
__________________
Quote:
|
|
|
|
|
|
August 6th, 2007, 19:44
|
#25 |
|
check your nozzle oring/piston oring/cylinder head oring...
Those are usually the 3 main causes. or just put a bit of silicone on them
|
|
|
|
|
|
August 6th, 2007, 19:46
|
#26 | |
|
Official Crybaby Chairsofter
|
Blah this freaking thing won't budge... i'm gonna get a Gun Doc to check it out. I have limited tools here and time. How can i find a Gun Doc for montreal (i live near Ecole Polytechnique at the Rockhill's Apt).
__________________
Quote:
|
|
|
|
|
|
August 6th, 2007, 19:49
|
#27 |
|
once u remove the grip/mag release/stock
Take a small screw driver and something bigger, and try tapping it out, it takes quite a bit of force, if it doesnt budge try it from the other side Theres a link above this one that shows u your nearest gun doc.. I'd take a look at it for you but im in calgary haha |
|
|
|
|
|
August 19th, 2007, 21:39
|
#28 | |
|
Official Crybaby Chairsofter
|
Update: I had my gun fix today. The piston head was the problem (i was amaze how the O-ring was to small for the cylinder...). Laylax piston head bought and installed, shoots great
350fps, so even tho its a late version #270, it does not shoot 420fps.
__________________
Quote:
|
|
|
|
|
|
August 19th, 2007, 23:16
|
#29 |
|
GBB Whisperer
|
Ah... that's what I'd proposed as a solution in one of your other threads.
I noticed the same thing on a CA25 I'm working on right now as well. The velocity and range improved even further with a better air seal through the replacement of cylinder head and air nozzle. I noticed the stock cylinder head to air nozzle connection had a high air loss as well. I guess this is starting to become a more prominent issue with these guns... |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
