Tokyo Marui m4a1 Problems

ww2warrior · February 23rd, 2007, 11:04

Ok i found an Old 9.6 V nimh Rc battery that still works. Could it damage my M4 if I plug it with a mini battery adaptor just to see if my 8.4 V battery was the problem?

Edit: ahhhh just saw that my adaptator was a Mini to Large adaptator...

Too bad But The 8.4 V battery didn't work with the rc car so I'm pretty sure the battery is dead.

Renegade) · February 23rd, 2007, 12:08

There we go, another problem solved because of a toasted battery! Wonder why everyone always blames the gun.

ww2warrior · April 18th, 2007, 09:54

Bumping this thread, New battery, same problem. No sound Nothing, Still not able to open the AEG, motor plates looks good...

Edit: ok AEG is open, got it in two parts, what should i do

Renegade) · April 18th, 2007, 11:49

You have some serious electrical issues man if there is no sound AT ALL when you pull the trigger, no juice is getting from the battery to the motor.. could be a wire problem, fuse, trigger is worn out, one of ur motor clips, ect..

Now if you dont have experience or dont want to go fooling around with it, take it to a gun doc or someone that knows what they are doing and they can pin point the problem for you.

six4 · April 18th, 2007, 19:23

Quote:

Originally Posted by ww2warrior

Bumping this thread, New battery, same problem. No sound Nothing, Still not able to open the AEG, motor plates looks good...

Edit: ok AEG is open, got it in two parts, what should i do

you should stop exactly where you are and seek an experienced gun doc,,only saying this because you seem new to the repair end of the guns and nothing is more frustrating for a gun tech than to recieve a weapon in a various zip-loc bags and hear,,"my gun doesnt fire"

ww2warrior · April 18th, 2007, 23:16

Quote:

Originally Posted by six4

you should stop exactly where you are and seek an experienced gun doc,,only saying this because you seem new to the repair end of the guns and nothing is more frustrating for a gun tech than so recieve a weapon in a various zip-loc bags and hear,,"my gun doesnt fire"

Rofl Ok I'm gonna contact a gunsmith

losttourist · April 19th, 2007, 10:50

it might not be a serious problem. I had a similar problem with my TM. All it was , was the connector plug to the battery. Sometimes all I had to do was to move the connector wires in a certain way and that would get the gun working. It may be a simple thing as the wires leading to the connector plug on the gun are a little loose. Did this gun ever work for you?

ww2warrior · April 19th, 2007, 11:40

Quote:

Originally Posted by losttourist

it might not be a serious problem. I had a similar problem with my TM. All it was , was the connector plug to the battery. Sometimes all I had to do was to move the connector wires in a certain way and that would get the gun working. It may be a simple thing as the wires leading to the connector plug on the gun are a little loose. Did this gun ever work for you?

No never. Wires looks good

Is the gun suppose to make any noice when I put it on Semi or auto?

buzzard · April 19th, 2007, 13:09

if you have the motor plate on the bottom of your pistol grip off, then pull out the motor slightly. just a little is enough to clear the gears. then try firing with the battery installed and motor wires still attached. the motor should turn over freely. if not then it isnt your mechbox internals and the problem is something electrical

Goldman · April 19th, 2007, 13:13

Didn't notice a reply to this, but did you check your fuse? If your TM dosen't have a fuse, are the fuse c-clamps still cliped together?

Renegade) · April 19th, 2007, 13:21

Quote:

Originally Posted by Goldman

Didn't notice a reply to this, but did you check your fuse? If your TM dosen't have a fuse, are the fuse c-clamps still cliped together?

I brought that up

but ya, he hasnt said if he checked anything I commented on..

ww2warrior · April 19th, 2007, 13:41

Sorry for that Renegade, Yes there's an Fuse, it is connected, I connected the two c clamps together to see if it was the fuse but it's still not working....

Buzzard, I did it but the engine is not turning at all.

Renegade) · April 19th, 2007, 13:52

Quote:

Originally Posted by ww2warrior

Sorry for that Renegade, Yes there's an Fuse, it is connected, I connected the two c clamps together to see if it was the fuse but it's still not working....

Buzzard, I did it but the engine is not turning at all.

Its an electrical issue then.. or your motor is fried.. cut wire somewhere, short, bad plugs, ect.. If you have a volatage meter you can hook it up to the motor leads, pull the trigger and see if you have current atleast reaching the motor.

ww2warrior · April 19th, 2007, 13:54

Forgot to mention that I checked all the wire from the battery to the GearBox, then from the gearbox to the engine. Wires are ok, no cut ,nothing.

My 100$ Question: Could it be my Fuck*** battery charger...Cause honnestly I don't see what else it could be.

Renegade) · April 19th, 2007, 14:19

Ya its sounding now like a stupid dead battery/charger problem... Try to borrow another battery and test it out. Or as I said, Motor, but the battery first will determine that.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 23rd, 2007, 11:04	#16
ww2warrior Trader rating Join Date: Mar 2006 Location: St-Jean-Sur-Richelieu	Ok i found an Old 9.6 V nimh Rc battery that still works. Could it damage my M4 if I plug it with a mini battery adaptor just to see if my 8.4 V battery was the problem? Edit: ahhhh just saw that my adaptator was a Mini to Large adaptator... Too bad But The 8.4 V battery didn't work with the rc car so I'm pretty sure the battery is dead. __________________ Paramédic Ca M4ris Cyma Ak-47 HFC G17 Last edited by ww2warrior; February 23rd, 2007 at 11:21..

February 23rd, 2007, 12:08	#17
Renegade) A Total Bastard Trader rating Join Date: Apr 2006 Location: Tottenham, Ontario	There we go, another problem solved because of a toasted battery! Wonder why everyone always blames the gun. __________________ W1-5

April 18th, 2007, 09:54	#18
ww2warrior Trader rating Join Date: Mar 2006 Location: St-Jean-Sur-Richelieu	Bumping this thread, New battery, same problem. No sound Nothing, Still not able to open the AEG, motor plates looks good... Edit: ok AEG is open, got it in two parts, what should i do __________________ Paramédic Ca M4ris Cyma Ak-47 HFC G17 Last edited by ww2warrior; April 18th, 2007 at 10:44..

April 18th, 2007, 11:49	#19
Renegade) A Total Bastard Trader rating Join Date: Apr 2006 Location: Tottenham, Ontario	You have some serious electrical issues man if there is no sound AT ALL when you pull the trigger, no juice is getting from the battery to the motor.. could be a wire problem, fuse, trigger is worn out, one of ur motor clips, ect.. Now if you dont have experience or dont want to go fooling around with it, take it to a gun doc or someone that knows what they are doing and they can pin point the problem for you. __________________ W1-5

April 19th, 2007, 10:50	#22
losttourist Trader rating Join Date: Aug 2004 Location: Brampton	it might not be a serious problem. I had a similar problem with my TM. All it was , was the connector plug to the battery. Sometimes all I had to do was to move the connector wires in a certain way and that would get the gun working. It may be a simple thing as the wires leading to the connector plug on the gun are a little loose. Did this gun ever work for you? __________________ If they take away the toy guns from law abiding citizens, sooner or later, only the criminals will have the really neat toys.

April 19th, 2007, 13:09	#24
buzzard Trader rating Join Date: Apr 2005 Location: dartmouth ns	if you have the motor plate on the bottom of your pistol grip off, then pull out the motor slightly. just a little is enough to clear the gears. then try firing with the battery installed and motor wires still attached. the motor should turn over freely. if not then it isnt your mechbox internals and the problem is something electrical __________________ aka beefhole proud Labradorian

April 19th, 2007, 13:13	#25
Goldman Trader rating Join Date: Dec 2001 Location: Toronto	Didn't notice a reply to this, but did you check your fuse? If your TM dosen't have a fuse, are the fuse c-clamps still cliped together? __________________ Maybe you'll find someone else to help you. Maybe black mesa... THAT WAS A JOKE, ha ha, fat chance. My Buy/Sell 1337ness rating

April 19th, 2007, 13:41	#27
ww2warrior Trader rating Join Date: Mar 2006 Location: St-Jean-Sur-Richelieu	Sorry for that Renegade, Yes there's an Fuse, it is connected, I connected the two c clamps together to see if it was the fuse but it's still not working.... Buzzard, I did it but the engine is not turning at all. __________________ Paramédic Ca M4ris Cyma Ak-47 HFC G17

April 19th, 2007, 13:54	#29
ww2warrior Trader rating Join Date: Mar 2006 Location: St-Jean-Sur-Richelieu	Forgot to mention that I checked all the wire from the battery to the GearBox, then from the gearbox to the engine. Wires are ok, no cut ,nothing. My 100$ Question: Could it be my Fuck*** battery charger...Cause honnestly I don't see what else it could be. __________________ Paramédic Ca M4ris Cyma Ak-47 HFC G17

April 19th, 2007, 14:19	#30
Renegade) A Total Bastard Trader rating Join Date: Apr 2006 Location: Tottenham, Ontario	Ya its sounding now like a stupid dead battery/charger problem... Try to borrow another battery and test it out. Or as I said, Motor, but the battery first will determine that. __________________ W1-5

Tokyo Marui m4a1 Problems

Doctor's Corner