Review (Completed, with pics!)- Tokyo Marui FA-MAS F1

Bob the Angry Potato · December 17th, 2005, 19:29

Actually, yes. That's it exactly.
Come to think of it, I don't trust myself with that, especially on my investment on the FA-MAS... I should get help with it, somehow.
Unfortunately, after comparing designs, I realised that the cocking handle won't fit under the G36 handle, even after boosting it up a bit. Instead, I'll try to find a way if it can be put on the side (such as to the upper left, like the AUG), or have a cocking handle pull like the Armalites.

mcguyver · December 17th, 2005, 20:22

seeing as the g36 and famas charging handle both slide in a similar fashion, could you not adapt the g36 handle to the famas? may take some trimming on the upper, but you may be able to hide some of it under the new handle.

Bob the Angry Potato · December 17th, 2005, 20:31

Ah, thanks : )
However, I don't have a G36. The only part I WILL have (Which I haven't bought, this is just a deal) is a handle. Perhaps I could, but I don't trust myself to do that kind of mod... ah, well. I have an offer from Foxtail, who wanted to help with a mod that was a hell of a lot harder...
Any other ideas? Perhaps, a Hardcoil-style lever-pull would be nice, the same as the C-7s have... however, it'd be hard. Besides, McGuyver, your idea's a hell of a lot cooler.
Come to think of it, if it's to be done G36 style, then I'll keep the FA-MAS cocking handle. It's full-metal, I'm not passing that up...

Moderate · December 17th, 2005, 21:02

Can you shave down the charging handle so that it doesn't stick up as much, then maybe you could put the G36 top/rail on easily.

Nice famas btw

*drool*

Bob the Angry Potato · December 17th, 2005, 21:09

Thanks

Anyways, I don't think that's possible. Another guy did something a lot like my project, yet the results are kind of discouraging (It turned out great, but no room)

Those belong to Boba Fett of Arnies Airsoft... there's just no room for the cocking handle, much less your finger.

Bob the Angry Potato · December 18th, 2005, 14:04

Ah, thanks to 163154, I may be able to have some metal parts machined for the FA-MAS (Foregrip, hop-up cover, perhaps a few more. It’ll get rid of that damn plasticky feel… at least, I’ll be happy once I’m not able to hold the FA-MAS like a pistol). Hopefully enough, combined with the G36 rail it’ll be the most kickass gun ever to come out of France

Afterwards, perhaps even a metal G36 rail from WGC Shop… I’m cautiously optimistic.
Pictures’ll come tomorrow, I’ve got a friend with a decent digital camera coming over. There’ll be pictures of every function, carefully labelled for all you potential FA-MAS buyers out there…

Bob the Angry Potato · December 19th, 2005, 16:11

Edited in Full-Auto shooting stuff... not too much, but oh, well.
Should have pictures in tomorrow. If not, expect it to be several weeks, I'm going away for a while.

Carvs · December 31st, 2005, 14:29

I havent looked through all of this until now. I dont know, the rail is nice but the way it is now it just has a nice balance to it. Unless you are putting a scope or something on that rail I think you should leave it the way it is. I have always loved that gun though (although I am more of a fan of the MGS series). Good review, hope to see more in it soon.

Bob the Angry Potato · January 4th, 2006, 19:39

Updated, pictures edited into post 1!

yanhchan · January 4th, 2006, 20:03

Cool pics. What balaclava do you have?

Carvs · January 4th, 2006, 20:05

Nice angles, a little blurry tho. Cool pics.

Bob the Angry Potato · January 4th, 2006, 20:20

Thanks : )
Anyways, that balaclava's from a ski shop at Martock. No idea what brand it is, I've had it lying around for about 2 years... sorry.
I have a few more pictures, but they're pretty blurry. There was a pic of the whole kit-and-caboodle, yet it seems to have been deleted somehow... I'll retake that tomorrow or the day after.

MCPeePants · January 5th, 2006, 03:47

Looking good. Out of curiosity, how do you find it shoulders with a paintball mask on? I find most iron sights are next to impossible to gaze down, but with the FA-MAS's higher carrying handle.... Lemme know.

Kwokwai · January 5th, 2006, 11:25

Just a note that standard M16 type mags won't fit in the FA-MAS without a little bit of modification as there are some slight differences IIRC.

Bob the Angry Potato · January 5th, 2006, 16:09

Ah, to answer your question, it handles pretty good. The carry handle's high enough, but the cheekplate's slippery against the mask's material. However, with some practice this is pretty much unnoticable.
For Kwokwai Wu, a piece inside the mag well has to be dremeled off. If I decide not to, then I'll chop-job the mag itself.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 4th, 2006, 19:39	#24
Bob the Angry Potato *AV Status Suspended pending trade resolution* Trader rating Join Date: Jul 2005 Location: A pile of empty boxes and broken dreams.	Updated, pictures edited into post 1! __________________ Age verifier- Halifax region

January 4th, 2006, 20:03	#25
yanhchan Trader rating Join Date: Jun 2005 Location: Scarborough/Richmond Hill ON	Cool pics. What balaclava do you have? __________________ YANHCHAN'S AIRSMITHING: AEG repair/Tune up/Upgrades V2/V3 mechboxes, rewiring/reconnecting. Ask not what your country can do for you; ask what you can do for your country ~John F. Kennedy

January 4th, 2006, 20:20	#27
Bob the Angry Potato *AV Status Suspended pending trade resolution* Trader rating Join Date: Jul 2005 Location: A pile of empty boxes and broken dreams.	Thanks : ) Anyways, that balaclava's from a ski shop at Martock. No idea what brand it is, I've had it lying around for about 2 years... sorry. I have a few more pictures, but they're pretty blurry. There was a pic of the whole kit-and-caboodle, yet it seems to have been deleted somehow... I'll retake that tomorrow or the day after. __________________ Age verifier- Halifax region

December 17th, 2005, 19:29	#16
Bob the Angry Potato *AV Status Suspended pending trade resolution* Trader rating Join Date: Jul 2005 Location: A pile of empty boxes and broken dreams.	Actually, yes. That's it exactly. Come to think of it, I don't trust myself with that, especially on my investment on the FA-MAS... I should get help with it, somehow. Unfortunately, after comparing designs, I realised that the cocking handle won't fit under the G36 handle, even after boosting it up a bit. Instead, I'll try to find a way if it can be put on the side (such as to the upper left, like the AUG), or have a cocking handle pull like the Armalites.

December 17th, 2005, 20:22	#17
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	seeing as the g36 and famas charging handle both slide in a similar fashion, could you not adapt the g36 handle to the famas? may take some trimming on the upper, but you may be able to hide some of it under the new handle.

December 17th, 2005, 20:31	#18
Bob the Angry Potato *AV Status Suspended pending trade resolution* Trader rating Join Date: Jul 2005 Location: A pile of empty boxes and broken dreams.	Ah, thanks : ) However, I don't have a G36. The only part I WILL have (Which I haven't bought, this is just a deal) is a handle. Perhaps I could, but I don't trust myself to do that kind of mod... ah, well. I have an offer from Foxtail, who wanted to help with a mod that was a hell of a lot harder... Any other ideas? Perhaps, a Hardcoil-style lever-pull would be nice, the same as the C-7s have... however, it'd be hard. Besides, McGuyver, your idea's a hell of a lot cooler. Come to think of it, if it's to be done G36 style, then I'll keep the FA-MAS cocking handle. It's full-metal, I'm not passing that up...

December 17th, 2005, 21:02	#19
Moderate Trader rating Join Date: Nov 2004 Location: Under a Bridge	Can you shave down the charging handle so that it doesn't stick up as much, then maybe you could put the G36 top/rail on easily. Nice famas btw drool

December 17th, 2005, 21:09	#20
Bob the Angry Potato *AV Status Suspended pending trade resolution* Trader rating Join Date: Jul 2005 Location: A pile of empty boxes and broken dreams.	Thanks Anyways, I don't think that's possible. Another guy did something a lot like my project, yet the results are kind of discouraging (It turned out great, but no room) Those belong to Boba Fett of Arnies Airsoft... there's just no room for the cocking handle, much less your finger.

December 18th, 2005, 14:04	#21
Bob the Angry Potato *AV Status Suspended pending trade resolution* Trader rating Join Date: Jul 2005 Location: A pile of empty boxes and broken dreams.	Ah, thanks to 163154, I may be able to have some metal parts machined for the FA-MAS (Foregrip, hop-up cover, perhaps a few more. It’ll get rid of that damn plasticky feel… at least, I’ll be happy once I’m not able to hold the FA-MAS like a pistol). Hopefully enough, combined with the G36 rail it’ll be the most kickass gun ever to come out of France Afterwards, perhaps even a metal G36 rail from WGC Shop… I’m cautiously optimistic. Pictures’ll come tomorrow, I’ve got a friend with a decent digital camera coming over. There’ll be pictures of every function, carefully labelled for all you potential FA-MAS buyers out there…

December 19th, 2005, 16:11	#22
Bob the Angry Potato *AV Status Suspended pending trade resolution* Trader rating Join Date: Jul 2005 Location: A pile of empty boxes and broken dreams.	Edited in Full-Auto shooting stuff... not too much, but oh, well. Should have pictures in tomorrow. If not, expect it to be several weeks, I'm going away for a while.

December 31st, 2005, 14:29	#23
Carvs Trader rating Join Date: Jul 2005 Location: Cambridge, Ontario	I havent looked through all of this until now. I dont know, the rail is nice but the way it is now it just has a nice balance to it. Unless you are putting a scope or something on that rail I think you should leave it the way it is. I have always loved that gun though (although I am more of a fan of the MGS series). Good review, hope to see more in it soon.

January 4th, 2006, 20:05	#26
Carvs Trader rating Join Date: Jul 2005 Location: Cambridge, Ontario	Nice angles, a little blurry tho. Cool pics.

January 5th, 2006, 03:47	#28
MCPeePants Trader rating Join Date: Aug 2004 Location: Maple Ridge, BC	Looking good. Out of curiosity, how do you find it shoulders with a paintball mask on? I find most iron sights are next to impossible to gaze down, but with the FA-MAS's higher carrying handle.... Lemme know.

January 5th, 2006, 11:25	#29
Kwokwai Trader rating Join Date: Dec 2001 Location: Mississauga, ON	Just a note that standard M16 type mags won't fit in the FA-MAS without a little bit of modification as there are some slight differences IIRC.

January 5th, 2006, 16:09	#30
Bob the Angry Potato *AV Status Suspended pending trade resolution* Trader rating Join Date: Jul 2005 Location: A pile of empty boxes and broken dreams.	Ah, to answer your question, it handles pretty good. The carry handle's high enough, but the cheekplate's slippery against the mask's material. However, with some practice this is pretty much unnoticable. For Kwokwai Wu, a piece inside the mag well has to be dremeled off. If I decide not to, then I'll chop-job the mag itself. __________________ Age verifier- Halifax region

Review (Completed, with pics!)- Tokyo Marui FA-MAS F1

Reviews