Scar-L WE DMR - Terrible Accuracy and consistency

[diogolopes]

Originally Posted by Kos-Mos

OP = you.
Everything before was to Pesto

So you are running a CQB-lengh (nothing past the gaz block) with a fake silencer or a 4" extension then a silencer?

I have seen some extensions getting bents or having burs/defects inside the bore. That can cause the BBs to hit and change direction.

You also should try a stock AEG barrel/non-hopped.

I tried a SCAR-L AEG when they came out, and it was amazing stock from the box. Only change I did was swapping the spring to shoot under 400.

First 10 minutes, took out 7 guys at roughly 80m.

Stock bore is 6.04mm, and it's good quality.

Sorry dude, hadn't understood your question and hadn't undertood that part of your message was to Pesto and part to me!

Anyway...

Regarding barrel extension, silencer, cqb lengh...

My Scar-L does come with a barrel extension, but the inner barrel fills the whole length of the barrel extension, so, no need to worry about the BB flying inside the barrel extension and touching anything!

The fake silencer comes after the barrel extension, but it's large enough, it was machined by me, so there's absolutally no chance for the bb to touch anything inside the fake silencer... Exit hole is also oversized to avoid any chance of the bb to strike it!

Also, i have the inner barrel perfectly centered into the barrel extension by a groove machined onto the barrel which receives an alignment/spacer o'ring!

Once again, sorry for not have understood your initial questions!

You are pretty right about quality of this gun.. it's amazing... mine shots 440 fps stock.. nothing changed, it was almost ready to go DMR (except the hopup system of course..

[ThunderCactus]

Yeah those madbull hop rubbers are not good, they're specifically meant to fit the madbull M4 hop chamber I think; it has a different shoulder profile to it.