Mid caps that will properly feed .30 BB's and heavier?

Rossco66 · March 6th, 2015, 22:11

I have the .28 Elite Force but was looking for a heavier Bio to use with my RHoped rifles.

wind_comm · March 6th, 2015, 22:17

hs5 has enhanced mag followers available. between them and some finesse with your mags (cleaning up any poorly cast flashing in the channel, etc) you should be able to feed anything at any speed.

MADDOG · March 6th, 2015, 22:24

Quote:

Originally Posted by Rossco66

I have the .28 Elite Force but was looking for a heavier Bio to use with my RHoped rifles.

Heavier weight is only good if it is consistent, and I have yet to find a heavier weight bio BB than .28 that are consistently round and shoot the same on every shot.

I have tried the Bioshot and found them lacking, if you just reach in an grab a handful (at least in the batch I had) you could see the differences in your hand and pick out BB's that did not look like the others.

A .28 BB that shoots the same way every time is worth more to me than inconsistent heavy weight BB that gives slightly more distance.

Rossco66 · March 6th, 2015, 22:32

Don't throw logic into this Todd. Its airsoft. lol

Quote:

Originally Posted by MADDOG

Heavier weight is only good if it is consistent, and I have yet to find a heavier weight bio BB than .28 that are consistently round and shoot the same on every shot.

I have tried the Bioshot and found them lacking, if you just reach in an grab a handful (at least in the batch I had) you could see the differences in your hand and pick out BB's that did not look like the others.

A .28 BB that shoots the same way every time is worth more to me than inconsistent heavy weight BB that gives slightly more distance.

Rossco66 · March 6th, 2015, 22:43

They want $15 USD plus a minimum of $13 USD for shipping for 5 little pieces of plastic. Seems a bit ridiculous to anybody else?

Quote:

Originally Posted by wind_comm

hs5 has enhanced mag followers available. between them and some finesse with your mags (cleaning up any poorly cast flashing in the channel, etc) you should be able to feed anything at any speed.

ThunderCactus · March 6th, 2015, 22:56

Quote:

Originally Posted by MADDOG

Heavier weight is only good if it is consistent, and I have yet to find a heavier weight bio BB than .28 that are consistently round and shoot the same on every shot.

I have tried the Bioshot and found them lacking, if you just reach in an grab a handful (at least in the batch I had) you could see the differences in your hand and pick out BB's that did not look like the others.

A .28 BB that shoots the same way every time is worth more to me than inconsistent heavy weight BB that gives slightly more distance.

I've been using .30 madbull non-bio (i know i know, madbull, but hear me out) in my ptws and they've actually been REALLY goddamn consistent.

wind_comm · March 6th, 2015, 23:48

that's shapeways' problem, they're just jerks. clandestine airsoft stocks them and I think hs5 stocks them as well and they'll just mail it to you. the cost itself is pretty reasonable including printing and r&d.

Foxer2373 · March 7th, 2015, 00:01

Love my 0.3g bio premium Golden balls in my PTW this year.

Styrak · March 7th, 2015, 01:32

Quote:

Originally Posted by Rossco66

They want $15 USD plus a minimum of $13 USD for shipping for 5 little pieces of plastic. Seems a bit ridiculous to anybody else?

$13 for international shipping? No, that doesn't seem ridiculous at all.

lurkingknight · March 7th, 2015, 02:00

I have some of those followers in my p90 mags, they wont' work with the bad batch of bioshots. It's improved, but not fixed.

Rossco66 · March 7th, 2015, 09:43

Intl shipping of I box I could see $13 but these little things can fit into an envelope.

lurkingknight · March 7th, 2015, 10:50

that's the way it works. it's a flat rate shipping I believe try adding more hs5 stuff to your cart.. a lot of it is pretty useful.

SuperCriollo · March 7th, 2015, 11:24

http://forums.airsoftmechanics.com/i...ic,5655.0.html

There is always the DIY mod :P

Rossco66 · March 7th, 2015, 14:30

This is extremely helpful and I will give it a go. One of the folks on this post cites Bioshots specifically so I am very hopeful.

I will post my results for future reference.

Thanks
SC

Quote:

Originally Posted by SuperCriollo

http://forums.airsoftmechanics.com/i...ic,5655.0.html

There is always the DIY mod :P

CR0M · March 7th, 2015, 15:24

my team has had bad luck with bioshot... we consider them average.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 6th, 2015, 22:11	#16
Rossco66 Trader rating Join Date: Aug 2013 Location: Burlington, Ontario	I have the .28 Elite Force but was looking for a heavier Bio to use with my RHoped rifles. __________________

March 6th, 2015, 22:17	#17
wind_comm Trader rating Join Date: Jul 2011 Location: Calgary/Vancouver	hs5 has enhanced mag followers available. between them and some finesse with your mags (cleaning up any poorly cast flashing in the channel, etc) you should be able to feed anything at any speed. __________________ too busy tinkering to play.

March 6th, 2015, 23:48	#22
wind_comm Trader rating Join Date: Jul 2011 Location: Calgary/Vancouver	that's shapeways' problem, they're just jerks. clandestine airsoft stocks them and I think hs5 stocks them as well and they'll just mail it to you. the cost itself is pretty reasonable including printing and r&d. __________________ too busy tinkering to play.

March 7th, 2015, 00:01	#23
Foxer2373 Trader rating Join Date: May 2011 Location: Smith Falls ON	Love my 0.3g bio premium Golden balls in my PTW this year.

March 7th, 2015, 02:00	#25
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	I have some of those followers in my p90 mags, they wont' work with the bad batch of bioshots. It's improved, but not fixed. __________________ I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.

March 7th, 2015, 09:43	#26
Rossco66 Trader rating Join Date: Aug 2013 Location: Burlington, Ontario	Intl shipping of I box I could see $13 but these little things can fit into an envelope. __________________

March 7th, 2015, 10:50	#27
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	that's the way it works. it's a flat rate shipping I believe try adding more hs5 stuff to your cart.. a lot of it is pretty useful. __________________ I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.

March 7th, 2015, 11:24	#28
SuperCriollo Trader rating Join Date: Apr 2009 Location: Kitchener, ON	http://forums.airsoftmechanics.com/i...ic,5655.0.html There is always the DIY mod :P __________________ SuperCriollo

March 7th, 2015, 15:24	#30
CR0M Trader rating Join Date: Nov 2010 Location: Hamilton	my team has had bad luck with bioshot... we consider them average. __________________ WBR Last edited by CR0M; March 7th, 2015 at 19:42..

Mid caps that will properly feed .30 BB's and heavier?

Airsoft Guns Discussion