TM M4 won't fire.

[Wh1t3y]

Originally Posted by CDN_Stalker

It'll likely happen again, once you put the connector(s) back on the motor, you should have given a slight pinch with a pair of needlenose pliers to make sure they stay on. Loose connections will pop off again with vibration from the gun firing.

Reviving.

Yeah absolutely, I had the same issue 20 minutes ago, so I pinched the connector and put it back on the terminal. Only now what I have found, is that when the gun is tilted forward I get that same issue, but when it's tilted backwards it fires perfectly fine! To be honest I don't know how the actual mechanism works at all, but I've got myself convinced that it's something to do with a broken piece in my selector switch.

I'm really not certain of anything on this one. I have so many ideas of what could be wrong but really no clue if any are accurate.

Thanks again,
Whitey.

[Wh1t3y]

Alright guys, I fixed it. For now. I don't really have faith it will last, because all I did was take the motor out and put it back in.

Thanks.

[Danke]

I had a broken motor connector once, it ran fine when the motor was slack but as soon as it was where it needed to be there was no conact. Maybe that's what you have going on now.