GHK M4 GBBR mags

[Yannos]

Hello all!

I have searched the board and haven't found what I wanted to know.

I bought myself a nice GBBR for a winter project and to start gaming it in the summer.
I then came to the Mag choosing factor.

WA Mags - Too expensive and fill valve stupidly place.
Bomber Mags - Would have tried them .. out of stock everywhere.
GHK - YES! Good price and so far good reviews.

I register on GGI to read more about GBBR, Where I found a nice little review on GBBR mags around the market made by Kullwarriror.

I have also red other thread talking about the GHK mags.
I found 2 problems so far and I need you guys to help me how to fix those.

- First BIG problem is that sometimes the mag ''sticks'' and all the gas escape from the mag. And also apparently the mag sits too low or something.

- Next problem is BBs. GHK mags takes smaller BB's like 5.95.
I am a BBB addict and I'm kinda pissed to change brand for that.
I would need to know what brand of BB's works great with GHK mags.


I need someone with first hand experience with these mags to help me out deciding with Brand of BBs and what is the exact gas leaking problem I might encounter.

I just bought 1 GHK mag from WGC to test them before. I have yet received my GBBR which will be here around next week

As information piece, my GBBR is a G&P WOC SR16 URX.

Thanks for helping me out!

[ILLusion]

Originally Posted by Yannos

Bomber Mags - Would have tried them .. out of stock everywhere.

Not everywhere.

I have Bomber mags in stock and ready to ship...

http://www.airsoftcanada.com/showthread.php?t=495


Complete with new German made fill valve o-rings, which fix all the leaking issues of previous versions.

[Yannos]

DO they fit good in a WOC? I heard they have fitting issues.

And do you give Discount if i buy a shit load? lol

[kullwarrior]

Originally Posted by Yannos

DO they fit good in a WOC? I heard they have fitting issues.

And do you give Discount if i buy a shit load? lol

Looks like my compile of mag is not a waste of my time after all. I'll explain about ghk mags:
Ghk mag is not the same dimension as ar-15 ones fitting on wa spec receiver is tight. You should hammer the shell to make it fit better or just wear n tear.
The tightness at first is well...enough to do pull ups with the mag catch pressed.

Ghk mags have a break in for the valve. Use lots of lubeafter 200 rounds the valve rarely sticks, except low on gas.

As for bbs, be expected that it will spurt all out at once (got hextriple feed one time)

[Yannos]

So if i lube my valve a lot it wont leak after my first 200 BBs fired on one mag?

And i need to hammer down the shell of the GHK? I thought they where less tight then Bomber :P

Any other useful info would be appreciate!

[kullwarrior]

Ber is a lot less it's an wa mag clone after all. Ghk mag in my opinion is the best affordable one.
Wa standard need o ring kit
wa heavy duty needs o ring kit
bomber need o ring kit and fill valve o ring
ghk needs break in
5ku and eac qc aren't that good and out of spec I'd expected 1 in 3

[ILLusion]

Originally Posted by Yannos

DO they fit good in a WOC? I heard they have fitting issues.

And do you give Discount if i buy a shit load? lol

I've never used them in a WOC, so I couldn't really tell you, but they fit a Prime WA body and a modified Inokatsu receiver just fine (fits the 2009 Inokatsu out of the box just fine.)

They're already priced below cost (which is already cheaper than how much you could get them for on your own, direct from manufacturer), but if you buy the entire remaining lot, I'll see what I can do about price.

Talk to me by PM if you want to go forward with it.

[Yannos]

Thanks for all the heads up guys.

Any lead for BB's ?
Kullwarrior, You must know that :P

[kullwarrior]

Originally Posted by Yannos

Thanks for all the heads up guys.

Any lead for BB's ?
Kullwarrior, You must know that :P

I use madbull, it works well for me, and yes Im using biobb, (so my parents don't yell at me if I left bb in the dirt at my backyard)

Just fyi, GHK is a good brand down sides: (sorry hard to type on iPhone, now Im on PC)
*WA Spec receiver fitting issue, (RS spec is fine aka Prime & Inokatsu)
*Less Gas Capacity, (kinda of obvisous since its two smaller tube instead of a huge tank on WA)
*No replacement parts, I broke one of mine (feed lip broke) there's no spare parts, no one has em, its propertiary
*Can sits wayy to high, (instead of the insert, push, slap, GHK mags on WA spec receiver I use insert, push, pull (so magcatch can engage)

Pros:
*Don't leak, if you lube it frequently, (weekly if you don't use)
*Only WA Mag design w/ mag shell, you could convert it to a P-mag with extreme heavy mods (I couldnt complete it)
*Reasonable price, $50 unlike WA at screaming $100, $124