|
|
|
June 4th, 2008, 03:57
|
#1 |
|
TM Glock 17 Metal Slide + Outer Barrel (PGC or Guarder?)
i'm looking for a metal slide for my glock, I can't decide which company to go with PGC or Guarder.
anyone have suggestions/experience? also... This slide won't be stopped at customs will it?? |
|
|
|
June 4th, 2008, 04:26
|
#2 |
|
No it should come through customs fine.
__________________
 Airsoft Sales and Repair/Upgrade Services |
|
|
|
|
June 4th, 2008, 10:44
|
#3 |
|
pick airsoft surgeon's slide...
|
|
|
|
|
June 4th, 2008, 11:18
|
#4 |
|
Get the latest version PGC has out...you won't regret it!
Aisoft Global:http://airsoftglobal.com/product_inf...oducts_id=5018
__________________
Kevorkian  I SUPPORT THE USE OF SILICA BB BASTARDS! Last edited by KEVORKIAN; June 4th, 2008 at 11:23.. |
|
|
|
|
June 4th, 2008, 11:32
|
#5 | |
|
kos
|
Quote:
The PGC is the "best" current TM glock slide as it's CNC, and actually fits in G17 holsters. However, the Guarder does NOT. I hear the finish is outstanding too.. |
|
|
|
|
|
June 4th, 2008, 14:05
|
#6 |
|
|
thanks a bunch guys! looks like i'm going with PGC : )
|
|
|
|
|
June 4th, 2008, 15:13
|
#7 | |
|
kos
|
Quote:
|
|
|
|
|
|
March 10th, 2009, 19:54
|
#8 | |
|
Quote:
__________________
|
|
|
|
|
|
April 2nd, 2009, 09:56
|
#9 |
|
PGC slide problem
I just received my PGC G17 slide kit from RedWolf for my TM Glock 17. There were no directions but I managed to install it but now it will not operate correctly. The slide gets stuck and I have to work to get it back off. I noticed that the front part of the slide where the recoil rod rests is twice as thick on the original plastic slide compared to the new replacement PGC slide. The new slide also came with a new outer metal barrel. Any ideas on how I can fix this?
Mike |
|
|
|
|
|
April 2nd, 2009, 10:17
|
#10 |
|
|
You WILL have to file down the rails of the frame where the slide tracks.
I have installed three PGC slides on my G17's and all required some degree of filing for each. DON"T expect them to be a perfect "out of the box" drop in replacement part because they are not! Just make sure to file down where the HIGH spots are and use some gear grease on the tracks when breaking it in...hand-racking of the slide will smooth it out over time. Also, don't use the metal outer barrel until you get the slide functioning 100%...the plastic outer will make things easier for you until you figure the slide out! FILE LITTLE BY LITTLE, too much and it will be sloppy!
__________________
Kevorkian I SUPPORT THE USE OF SILICA BB BASTARDS! Last edited by KEVORKIAN; April 2nd, 2009 at 10:20.. |
|
|
|
|
April 2nd, 2009, 11:29
|
#11 |
|
Thank you very much. I will try that when I get home.
|
|
|
|
|
|
April 7th, 2009, 18:11
|
#12 | |
|
Quote:
Kevorkian, I just bought a TM G17 and the metal slide, had the same problems as described here. Could you post a picture of the high spots needing filing? Dont want to mess up a great gun the first day!! 
|
||
|
|
|
|
April 7th, 2009, 18:40
|
#13 | |
|
|
Quote:
I'll post some pics in a little bit!
__________________
Kevorkian I SUPPORT THE USE OF SILICA BB BASTARDS! |
|
|
|
|
|
April 7th, 2009, 19:05
|
#14 |
|
Thanx for quick reply!
I noticed some rub marks in the slide after I took it back off, guess thats one place it needs some attention... ALso saw there was a plastic "shim" on the original slide on the muzzle-end where the recoil spring goes. That not beeing there on the PGC slide gives some slack, is that also normal? |
|
|
|
|
|
April 10th, 2009, 21:06
|
#15 |
|
Great help when needed
Just a public thanx to Kevorkian for good advice to a newbie to GBB's!
I'll be callin on you next time as well buddy. Funny how all Chanucks I've ever met are decent guy's  Must be all that cold fresh air we Northerners get that makes us so likable Ravenrider |
|
|
|
|
  |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
