My Small Collection

Griffin · December 24th, 2007, 22:31

My humble spin with a PTW!, hoping to replace the clone CASV with a Omega 7.0 DD sometime in the new year. I still need to grab a rear sight the ARMS #40L RS is on its way but, I doubt I will see it until the new year. The TM Hi-capa is stock so far expect inner barrel which is a TanioKoba twist. Hopefully soon I will be able to add some nice Shooters Design items to it.

Oh please excuse the pictures

, the good digital camera is being fixed after the baby decided to submerge it in the dogs water bucket.

Wilson · December 24th, 2007, 22:41

Sexy. I'm torn on the PTW - just seems too much money to dump into airsoft all in one place like that... but damn, I want one.

Maybe just a CA with Systema internals will do well enough. lol

Griffin · December 24th, 2007, 23:02

If I had not gotten a very good deal like I did I would not be owning one right now.

Lakonian · December 24th, 2007, 23:15

Have I told you you're a bastard? Well, you are. That's a gorgeous set-up.. How's the magnifier treatin' ya?

Oh, and you're missing a rear BUIS

Griffin · December 24th, 2007, 23:22

I like the the magnifier a lot, just need a flip mount and Ill be happy. Yes I know

, until like yesterday I just could not find one I liked clone wise. Than stumbled upon a US ebay seller selling the ARMS ones RS. I also need to get a slightly thinner washer for the clone Vltor flash hider so it sits just right on barrel.

leblanc74 · December 26th, 2007, 04:45

hey dude,

that set-up looks familliar

glad to see that you were able to post your collection.... and good luck on that Omega rail, if you need help on that one you know what to do... if my ARMS SIR does not get throught customs, I will also get the Omega so maybe we could combine our order and try to have a better deal along with shipping cost...

before getting a real mount for the 3X Mag, I have on order a Samson Quick Flip Mount for 3X Magnifier...once I receive it, I will let you know how's the fit...

Griffin · January 11th, 2008, 19:10

Some updated pics of my TM 5.1 all dress up now!

manchovie · January 11th, 2008, 19:17

is that a car seat? nice btw, i've always liked v12s

Griffin · January 11th, 2008, 19:21

LOL no its my computer chair used for the photo session.

Huge · January 11th, 2008, 20:41

That's an awesome PTW setup, kudos to you

RacingManiac · January 11th, 2008, 20:49

nice, I like that Hi-Capa....does the SD Springfield slide also have the bushing groove or not?

Griffin · January 11th, 2008, 22:03

If your referring to that grove on the underside of slide to help you remove the bushing/guide rod when disassembling than yes. Now to look noobish if its not that could you explain which groove you mean thanks.

KEVORKIAN · January 11th, 2008, 22:25

I believe it does have the slot for the SD bushing...at least the one I had did!

Very nice Griffin...

6ft4 · January 11th, 2008, 23:07

nice collection!!

Griffin · January 12th, 2008, 00:56

Thanks for the replies! The 5.1 is basically done just needs a few additions. I was thinking a SD bushing kit, than getting the Nineball metal hammer housing. Of course I need to add a new trigger, and than change the hammer but, thats going to have to wait.

Need to say big thanks to Kevorkian, he was a huge help when it came to the few issues I had with the 5.1. If your upgrading your 5.1 and need help defiantly send him a PM.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 24th, 2007, 22:31	#1
Griffin Trader rating Join Date: Aug 2007 Location: Mississauga, Ontario	My Small Collection My humble spin with a PTW!, hoping to replace the clone CASV with a Omega 7.0 DD sometime in the new year. I still need to grab a rear sight the ARMS #40L RS is on its way but, I doubt I will see it until the new year. The TM Hi-capa is stock so far expect inner barrel which is a TanioKoba twist. Hopefully soon I will be able to add some nice Shooters Design items to it. Oh please excuse the pictures , the good digital camera is being fixed after the baby decided to submerge it in the dogs water bucket.

December 24th, 2007, 22:41	#2
Wilson Trader rating Join Date: Aug 2003 Location: Ottawa, ON	Sexy. I'm torn on the PTW - just seems too much money to dump into airsoft all in one place like that... but damn, I want one. Maybe just a CA with Systema internals will do well enough. lol __________________ IN OMNIA PARATUS

December 26th, 2007, 04:45	#6
leblanc74 Trader rating Join Date: Oct 2007 Location: Coquitlam	hey dude, that set-up looks familliar glad to see that you were able to post your collection.... and good luck on that Omega rail, if you need help on that one you know what to do... if my ARMS SIR does not get throught customs, I will also get the Omega so maybe we could combine our order and try to have a better deal along with shipping cost... before getting a real mount for the 3X Mag, I have on order a Samson Quick Flip Mount for 3X Magnifier...once I receive it, I will let you know how's the fit... __________________ My Collection: Seller/Buyer Feedback Last edited by leblanc74; December 26th, 2007 at 04:48..

December 24th, 2007, 23:02	#3
Griffin Trader rating Join Date: Aug 2007 Location: Mississauga, Ontario	If I had not gotten a very good deal like I did I would not be owning one right now.

December 24th, 2007, 23:15	#4
Lakonian kos Trader rating Join Date: Feb 2006 Location: Wherever.	Have I told you you're a bastard? Well, you are. That's a gorgeous set-up.. How's the magnifier treatin' ya? Oh, and you're missing a rear BUIS

December 24th, 2007, 23:22	#5
Griffin Trader rating Join Date: Aug 2007 Location: Mississauga, Ontario	I like the the magnifier a lot, just need a flip mount and Ill be happy. Yes I know , until like yesterday I just could not find one I liked clone wise. Than stumbled upon a US ebay seller selling the ARMS ones RS. I also need to get a slightly thinner washer for the clone Vltor flash hider so it sits just right on barrel.

January 11th, 2008, 19:10	#7
Griffin Trader rating Join Date: Aug 2007 Location: Mississauga, Ontario	Some updated pics of my TM 5.1 all dress up now!

January 11th, 2008, 19:17	#8
manchovie Trader rating Join Date: Dec 2003 Location: Toronto	is that a car seat? nice btw, i've always liked v12s __________________ experienced toronto gun doctor, hundreds of guns serviced manchovie gun doc thread! my b/s rating

January 11th, 2008, 19:21	#9
Griffin Trader rating Join Date: Aug 2007 Location: Mississauga, Ontario	LOL no its my computer chair used for the photo session.

January 11th, 2008, 20:41	#10
Huge formerly Huge94 Trader rating Join Date: Nov 2007 Location: Montreal, QC	That's an awesome PTW setup, kudos to you

January 11th, 2008, 20:49	#11
RacingManiac Trader rating Join Date: Sep 2006 Location: Canada/US	nice, I like that Hi-Capa....does the SD Springfield slide also have the bushing groove or not? __________________ My Arnies' Album My PBase Album Custom Pistol Whore...

January 11th, 2008, 22:03	#12
Griffin Trader rating Join Date: Aug 2007 Location: Mississauga, Ontario	If your referring to that grove on the underside of slide to help you remove the bushing/guide rod when disassembling than yes. Now to look noobish if its not that could you explain which groove you mean thanks.

January 11th, 2008, 22:25	#13
KEVORKIAN Trader rating Join Date: Nov 2006 Location: Manitoba	I believe it does have the slot for the SD bushing...at least the one I had did! Very nice Griffin... __________________ Kevorkian I SUPPORT THE USE OF SILICA BB BASTARDS!

January 11th, 2008, 23:07	#14
6ft4 Trader rating Join Date: Jun 2003 Location: 604 & 852	nice collection!! __________________

January 12th, 2008, 00:56	#15
Griffin Trader rating Join Date: Aug 2007 Location: Mississauga, Ontario	Thanks for the replies! The 5.1 is basically done just needs a few additions. I was thinking a SD bushing kit, than getting the Nineball metal hammer housing. Of course I need to add a new trigger, and than change the hammer but, thats going to have to wait. Need to say big thanks to Kevorkian, he was a huge help when it came to the few issues I had with the 5.1. If your upgrading your 5.1 and need help defiantly send him a PM. Last edited by Griffin; January 12th, 2008 at 00:59..

My Small Collection

Airsoft Media