Vltor Mur 1 Upper Receiver

jonney. · December 8th, 2007, 02:57

I would like to purcase a Vltor Mur 1 upper from WGC shop. And am wondering if it will make it across the border in the past i have been tolled that you can not ship recivers over the border.
But have recently been tolled otherwise due to the fact that it is sold as just the upper receiver.

Is this ture????

Amos · December 8th, 2007, 03:04

You wont receive it.

Drake · December 8th, 2007, 03:28

The question has been debated lately. Technically it should just be the lower, but CBSA may decide not to differentiate between upper and lower receiver.

Either way WGC is sold out, and this was a limited production run, so it no longer matters.

Styrak · December 10th, 2007, 00:46

An upper receiver should be fine. I don't know what Amos is talking about. It's not a restricted item.

leblanc74 · December 10th, 2007, 00:58

it has been done, but you might get into trouble, the CBSA like to get their share of some money...and a real hasle to get it, if you want to try, I know some person in the US can modify one for you......

Renegade) · December 10th, 2007, 01:06

Damn that is one gorgeous PTW.. Color tones are a bit off, but not a huge deal, just looks awsome put together.

mcguyver · December 10th, 2007, 01:11

Quote:

Originally Posted by Styrak

An upper receiver should be fine. I don't know what Amos is talking about. It's not a restricted item.

The CBSA and RCMP have been communicating about this lately. If you have a restricted PAL, and own a registered AR, no problems importing most parts. But if you don't, you might be asked why you are ordering a real upper for a gun you legally don't have, or do you?

In Canada, no problem. You don't even need ID. Bringing it across the border is a different matter entirely.

If it's an airsoft upper, I wouldn't worry about too much. But if it is in-fact a real upper, different story. Lowers, forget it either way.

And Leblanc, did you buy that MUR/LaRue from Titliest?

Lakonian · December 10th, 2007, 01:35

Quote:

Originally Posted by mcguyver

And Leblanc, did you buy that MUR/LaRue from Titliest?

Interested aswell. I'm definitely going to be in the market for a MUR upper..

mcguyver · December 10th, 2007, 01:37

$1200 U.S. though, it's a little bit beyond your run-of-the-mill, that's for sure. At least he sold the mount, so it's not $1500 anymore.

Sorry, I erred. It's $1250 + 3% Paypal plus shipping.

leblanc74 · December 11th, 2007, 13:44

Quote:

Originally Posted by kos

Interested aswell. I'm definitely going to be in the market for a MUR upper..

the one from Titliest is still for grab, It came close to purchase it, but i slept on it and I wasn't 100% comfortable importing that receiver/barrel... however, looks like I did the right thing, because someone had already imported an MUR, so without hesitation I purchased it, a bit pricy, but well worth the investment...and KOS, if I deciede to sell it, I know who to ask

Lakonian · December 11th, 2007, 13:58

Quote:

Originally Posted by leblanc74

the one from Titliest is still for grab, It came close to purchase it, but i slept on it and I wasn't 100% comfortable importing that receiver/barrel... however, looks like I did the right thing, because someone had already imported an MUR, so without hesitation I purchased it, a bit pricy, but well worth the investment...and KOS, if I deciede to sell it, I know who to ask

Thanks alot, buddy

So Titliest actually got some receivers floating around, eh? Wasn't IBICO going to do the same?

leblanc74 · December 11th, 2007, 18:59

Quote:

Originally Posted by Endymion

Titleist bought his receiver from another user on the forum. Shortly after he put together his beautiful new upper he decided to sell it.

just follow the cookie crumb and you'll will find the source to the one who can make one for you....but if someone would purchase Titleist setup, man, that is pretty sweet...he even has the outer barrel attached I beleive...

leblanc74 · December 15th, 2007, 03:37

Finally got mine...the fit is perfect and so is the cylinder, looking at the workmanship, it seems achievable on duplicating the trimmed area on my high-speed lathe.

...check it out in my collection gallery... at
http://www.airsoftcanada.com/showthread.php?t=48799

pOkiE · December 21st, 2007, 04:52

Oh baby I want one of those...I was looking into getting a Larue handguard too so getting a real steel upper would make things alot easier. I dont use a PTW though...are they able to fit marui type gearbox/lowers?

Voodoo · December 21st, 2007, 10:41

i cant remember 100% but im pritty sure King Arms is releasing a upper like this but a bit different. The pic i saw was of the shiny unpainted top on a M4.

These and CASVs are the new Wii and 360 lol

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 8th, 2007, 02:57	#1
jonney. Trader rating Join Date: Sep 2007 Location: Calgary AB	Vltor Mur 1 Upper Receiver I would like to purcase a Vltor Mur 1 upper from WGC shop. And am wondering if it will make it across the border in the past i have been tolled that you can not ship recivers over the border. But have recently been tolled otherwise due to the fact that it is sold as just the upper receiver. Is this ture????

December 8th, 2007, 03:04	#2
Amos Trader rating Join Date: Aug 2006 Location: Japan	You wont receive it. __________________ Custom Builds: FA3674U Krinkov G3SD6

December 8th, 2007, 03:28	#3
Drake E-01 Trader rating Join Date: Dec 2001 Location: Montreal, QC	The question has been debated lately. Technically it should just be the lower, but CBSA may decide not to differentiate between upper and lower receiver. Either way WGC is sold out, and this was a limited production run, so it no longer matters. __________________

December 10th, 2007, 00:46	#4
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	An upper receiver should be fine. I don't know what Amos is talking about. It's not a restricted item. __________________ Airsoft Sales and Repair/Upgrade Services

December 10th, 2007, 00:58	#5
leblanc74 Trader rating Join Date: Oct 2007 Location: Coquitlam	it has been done, but you might get into trouble, the CBSA like to get their share of some money...and a real hasle to get it, if you want to try, I know some person in the US can modify one for you...... __________________ My Collection: Seller/Buyer Feedback Last edited by leblanc74; December 10th, 2007 at 01:01..

December 10th, 2007, 01:06	#6
Renegade) A Total Bastard Trader rating Join Date: Apr 2006 Location: Tottenham, Ontario	Damn that is one gorgeous PTW.. Color tones are a bit off, but not a huge deal, just looks awsome put together. __________________ W1-5

December 10th, 2007, 01:37	#9
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	$1200 U.S. though, it's a little bit beyond your run-of-the-mill, that's for sure. At least he sold the mount, so it's not $1500 anymore. Sorry, I erred. It's $1250 + 3% Paypal plus shipping. __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy. Last edited by mcguyver; December 10th, 2007 at 01:41..

December 15th, 2007, 03:37	#13
leblanc74 Trader rating Join Date: Oct 2007 Location: Coquitlam	Finally got mine...the fit is perfect and so is the cylinder, looking at the workmanship, it seems achievable on duplicating the trimmed area on my high-speed lathe. ...check it out in my collection gallery... at http://www.airsoftcanada.com/showthread.php?t=48799 __________________ My Collection: Seller/Buyer Feedback Last edited by leblanc74; December 15th, 2007 at 03:41..

December 21st, 2007, 10:41	#15
Voodoo Trader rating Join Date: Oct 2005 Location: Calgary	i cant remember 100% but im pritty sure King Arms is releasing a upper like this but a bit different. The pic i saw was of the shiny unpainted top on a M4. These and CASVs are the new Wii and 360 lol __________________ why cant westcan come back?

Vltor Mur 1 Upper Receiver

Accessories Discussion