Rewire Front to Rear

[Blackthorne]

OK..I searched around here and Google and saw lots of open mechboxes and read post of folks who said it can be done and that they could do it, but zero on instructions or pictures....


Anyone here have PICS on how to take a FRONT WIRED version 2 mechbox and REAR WIRE it?

M4 body with bats in the fore grip being converted to VLTOR batts in rear stock.

Other than running the wires around the motor shaft I can't see any way of doing it.

[Primus]

Don't have any pics of it but I've done it several times BT but next time you're down I can walk you through it. Just let me know.

[Renegade)]

It might seem like a tougher job than it is, but it really isnt, pics might help with the taking down of the mechbox if you dont know how to do so, but the wiring is simple.

All you really need to do is bend the red trigger wire to the rear and run it along the very bottom of all wires because it has to cross the motor opening. The other red wire remains the same and then you just need to shorten the negative wire to however length you need.

Note: You maybe need to resolder that other red wire if it isnt long enough from being front wired, or you may not, mine made it all the way out of the mech just fine, then I just soldered the rest of the harness on.

Hope this helps, if you really need pics, I might be able to take some if someone else doesnt have any already.

[The Saint]

http://www.airsoftretreat.com/review...hp?product=210

That's on how to do the exact oppose of what you want, but it does include a few pictures of exactly what you want...

[Blackthorne]

DAMN! That was the trick! Running the wire under the the two motor wires...DOH!

Thanks Renegade and Saint!

And thanks Primus! I would take you up on that at Kevs but I need it finished this week.

[Primus]

No worries, that link to ASR is pretty good and way better than I could of ever typed up on here.