Hurricane HK 416 conversion kit

Pedro888 · April 30th, 2007, 08:14

Hi,

Was curious to know comments on this kit (version 2). Of course its a Hurricane so it should not be that bad but lets leave the comments to people who have one or assembled one.

- Assembly ease
- Mag compatibility
- Fit & finish
- Long term ownership feedback

Thanks!

pwor · April 30th, 2007, 21:06

I just picked mine up on friday got it from jugglez.its one nice piece of kit let me tell you.my build was the hurricane 416 kit,systema m120 complete gearbox,hurricane metal exceories kit,madbull pyathon tightbore ak inner barrel,classic ary high torque motor.my kit is the version 3,im sure jugglez or speedjunkie and stokes can add more.

Eddie · May 1st, 2007, 00:29

V1 HK416 Kit
-Fairly easy to assemble takes a few hours at most.
-Soldering required if you want to use the crane stock.
-Had the pipe on my metal body milled down for the wire to fit more easily
-All mags should work MAG plastic ones are loose buy fixed with some 100mile tape in the magwell.
-Fit and finish is excellent but a bit shiny.
-Long term? because I have a V1 it doesn't have a notch for the RAS so it tends to offset for the body.

Have owned my for almost a year now its still in great condition except for a few nicks for well trees and whatnot. Only real problems if from the gearbox.

For those who don't know the HK416's outer barrel is steel so its got some real heft to it.

Pedro888 · June 5th, 2007, 21:35

After assembly of my V3 I confirm that KA mags fit & feed perfectly!

Its very nice!!

stokes · June 6th, 2007, 01:33

You serious? Both of mines are version 2s I cant fit the KA magz in... Thats WEIRD... they must have changed more things to the body...

I demand to see some pics lol... I really wanna know what the improvements look like.

Pedro888 · June 6th, 2007, 08:18

Quote:

Originally Posted by stokes

You serious? Both of mines are version 2s I cant fit the KA magz in... Thats WEIRD... they must have changed more things to the body...

I demand to see some pics lol... I really wanna know what the improvements look like.

I will post pics soon. What I can say for now is to confirm that V3 works really good with the KAs. They have modified a bit the magwell to accomodate. Also not sure if V2 has the notch on the upper rail for the front end to really integrate with the upper receiver.

Jugglez · June 6th, 2007, 09:51

The V2's have the notch where the upper meets the front end also.

Improvements in the V3's:
Steel front sight
Improved mag fitment
Improved inner cavity of the receiver (charging handle fits alot better now)
More realistic battle grip
Widened channel in buffer tube, makes running wires to the stock easier
Slightly textured finish on the front end (not that there was anything wrong with previous versions)
Blued finish on the flash hider

Lakonian · June 6th, 2007, 11:44

Quote:

Originally Posted by Jugglez

The V2's have the notch where the upper meets the front end also.

Improvements in the V3's:
Steel front sight
Improved mag fitment
Improved inner cavity of the receiver (charging handle fits alot better now)
More realistic battle grip
Widened channel in buffer tube, makes running wires to the stock easier
Slightly textured finish on the front end (not that there was anything wrong with previous versions)
Blued finish on the flash hider

Hmmm wonder what V4's gonna be like.

hehe.. will probably be joining the club in a few weeks ^_^!

stokes · June 6th, 2007, 15:23

FUCK! Time for a V3 m4a1 length hk416...

Pedro888 · June 7th, 2007, 08:07

Quote:

Originally Posted by kos

Hmmm wonder what V4's gonna be like.

hehe.. will probably be joining the club in a few weeks ^_^!

Maybe they will add built in drewl containers cause this thing is niiiiiice! :cheers:
Let us drink from the blood of our non-HK enemies!!

hehehe

Pedro888 · June 10th, 2007, 19:07

Just a question to see...

I bought 2 batteries at Onlybatterypacks one NiMh and the other NiCd. Strangely both specified they would fit the HK but the NiMh is a little too big and interfere with the tube and is very very tight. The NiCd one is fine. However the wiring is not as described in the assembly manual that came in the kit.

My question is: where do you guys get your batteries from and are they the same as the sketch specified by Hurricane.

Thanks!

stokes · June 10th, 2007, 21:43

I get mine from Jugglez! Contact him he can get you anything.

pwor · June 10th, 2007, 21:57

yup i got both of mine from jugglez perfect fit on both.

Blackspeed416 · July 9th, 2007, 04:39

Pedro Pics of you version three or ban!

Brazenhead · July 17th, 2007, 04:11

Can we see some pictures?

-BH

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

April 30th, 2007, 08:14	#1
Pedro888 Trader rating Join Date: Nov 2005 Location: Sherbrooke, Quebec	Hurricane HK 416 conversion kit Hi, Was curious to know comments on this kit (version 2). Of course its a Hurricane so it should not be that bad but lets leave the comments to people who have one or assembled one. - Assembly ease - Mag compatibility - Fit & finish - Long term ownership feedback Thanks! __________________ PeDrO 1st Pathfinders Regiment ''Don't go to Bagdad unless you wanna bang!''

May 1st, 2007, 00:29	#3
Eddie Trader rating Join Date: Jun 2003 Location: Surrey, BC	V1 HK416 Kit -Fairly easy to assemble takes a few hours at most. -Soldering required if you want to use the crane stock. -Had the pipe on my metal body milled down for the wire to fit more easily -All mags should work MAG plastic ones are loose buy fixed with some 100mile tape in the magwell. -Fit and finish is excellent but a bit shiny. -Long term? because I have a V1 it doesn't have a notch for the RAS so it tends to offset for the body. Have owned my for almost a year now its still in great condition except for a few nicks for well trees and whatnot. Only real problems if from the gearbox. For those who don't know the HK416's outer barrel is steel so its got some real heft to it. Last edited by Eddie; May 1st, 2007 at 00:31..

June 5th, 2007, 21:35	#4
Pedro888 Trader rating Join Date: Nov 2005 Location: Sherbrooke, Quebec	After assembly of my V3 I confirm that KA mags fit & feed perfectly! Its very nice!! __________________ PeDrO 1st Pathfinders Regiment ''Don't go to Bagdad unless you wanna bang!''

April 30th, 2007, 21:06	#2
pwor Trader rating Join Date: Jan 2007 Location: ontario	I just picked mine up on friday got it from jugglez.its one nice piece of kit let me tell you.my build was the hurricane 416 kit,systema m120 complete gearbox,hurricane metal exceories kit,madbull pyathon tightbore ak inner barrel,classic ary high torque motor.my kit is the version 3,im sure jugglez or speedjunkie and stokes can add more.

June 6th, 2007, 01:33	#5
stokes Trader rating Join Date: Dec 2005 Location: Toronto	You serious? Both of mines are version 2s I cant fit the KA magz in... Thats WEIRD... they must have changed more things to the body... I demand to see some pics lol... I really wanna know what the improvements look like.

June 6th, 2007, 09:51	#7
Jugglez Trader rating Join Date: Feb 2005 Location: Swimming in a pool of Xpresspost receipts.... Toronto - 400/401	The V2's have the notch where the upper meets the front end also. Improvements in the V3's: Steel front sight Improved mag fitment Improved inner cavity of the receiver (charging handle fits alot better now) More realistic battle grip Widened channel in buffer tube, makes running wires to the stock easier Slightly textured finish on the front end (not that there was anything wrong with previous versions) Blued finish on the flash hider __________________

June 6th, 2007, 15:23	#9
stokes Trader rating Join Date: Dec 2005 Location: Toronto	FUCK! Time for a V3 m4a1 length hk416...

June 10th, 2007, 19:07	#11
Pedro888 Trader rating Join Date: Nov 2005 Location: Sherbrooke, Quebec	Just a question to see... I bought 2 batteries at Onlybatterypacks one NiMh and the other NiCd. Strangely both specified they would fit the HK but the NiMh is a little too big and interfere with the tube and is very very tight. The NiCd one is fine. However the wiring is not as described in the assembly manual that came in the kit. My question is: where do you guys get your batteries from and are they the same as the sketch specified by Hurricane. Thanks! __________________ PeDrO 1st Pathfinders Regiment ''Don't go to Bagdad unless you wanna bang!''

June 10th, 2007, 21:43	#12
stokes Trader rating Join Date: Dec 2005 Location: Toronto	I get mine from Jugglez! Contact him he can get you anything.

June 10th, 2007, 21:57	#13
pwor Trader rating Join Date: Jan 2007 Location: ontario	yup i got both of mine from jugglez perfect fit on both.

July 9th, 2007, 04:39	#14
Blackspeed416 Trader rating Join Date: Jul 2007	Pedro Pics of you version three or ban!

July 17th, 2007, 04:11	#15
Brazenhead Trader rating Join Date: Jul 2007 Location: MB	Can we see some pictures? -BH

Hurricane HK 416 conversion kit

Accessories Discussion