|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
February 25th, 2019, 04:00
|
#1 |
|
AEG upgrade advice/suggestions
So I'm fairly new to airsoft, I'm currently ordering a King Arms b.r.o spec15. I wanted to change the motor to the matrix Godzilla high torque but I'm worried that because the gun has a MOSFET out of the box. Will I have to rewire the MOSFET in order to replace motor or can I just swap it out with no issues?
|
|
|
|
February 26th, 2019, 13:40
|
#2 |
|
Don't have hands on experience with that exact model.
Motor should just be a drop in part like any other m4. What is your goal with a high torque motor? As you may be able to achieve comparable results with an 11.1v lipo. Sent from my SM-G900W8 using Tapatalk |
|
|
|
|
|
February 26th, 2019, 14:07
|
#3 |
|
Get a SHS HT motor.
|
|
|
|
|
February 26th, 2019, 19:48
|
#4 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
motors just have 2 leads on them, there's no reason you should have to rewire a mosfet to change a motor.
And if you're going to upgrade a motor, I recommend you buy a motor from a reputable company like ASG or Tienly. |
|
|
|
|
February 27th, 2019, 01:55
|
#5 |
|
|
Just wanted better trigger response, I was going to put an 11.1 lipo in as well, thanks a ton
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
