KJW FM M92F Inner Barrel

[Solex]

I was disassembling my gun & in the barrel there was a small steel pin that i can't remove. Is there a tool to remove it?

here a pic of what am talking about:

[666]

I don't think there is a specific tool for that pin. I use one of those tiny screwdrivers and a hammer. The pin comes out easy. Just make sure you are not hitting too hard.

[Solex]

I used a tiny hole punch and i...er...kinda broke the punch. I think this pin is welded to the barrel or something because it would not budge at all :?.

Any ideas?

[v82slo]

Sounds like your hole punch is larger then the hole you want to remove the pin from (that's what the ladies keep telling me when I try that).

You need a smaller pin or nail to push out the pin.

[Solex]

I think i need a tool because it looks like it's pressure fitted

http://img48.imageshack.us/img48/9697/dsc004851gt.jpg

http://img232.imageshack.us/img232/8977/dsc004877nf.jpg

I've tried a nail but it makes no difference...

[Stealth]

You hammer it out, but a nail won't work. If you have a flathead small enough to fit that, then go for it. Hit the edge, not the centre.

[Rob]

http://www.wgcshop.com/pcart/shopper...0cc6e2a393c096
if you must spend money

i'd still try a nail and hammer, just a matter of finding the right size.

[Solex]

I got the pin out using a tiny 4 head screw. The only problem was that the new inner barrel didn't fit on it because there was indent on the original barrel soo... i used my leatherman & filed it down to the right indent.

pics:

http://img96.imageshack.us/img96/8965/19da.jpg

http://img478.imageshack.us/img478/6238/21qn.jpg


Original Barrel:

http://img511.imageshack.us/img511/8880/51zv.jpg


Modded Barrel:

http://img57.imageshack.us/img57/277/34un2.jpg

http://img478.imageshack.us/img478/4118/47kw1.jpg