delete

[dami]

Hi,
From Eye Piece to Power Ring(3-9x ring) all that part is a bit shaky. And is not the screw, checked already. When I shoot the G-spec, looking through the scope, it goes back to initial position. It was only luck that I noticed, the shaking. It's only about 3mm-5mm if you look though the scope. Is that suppossed to happen to sustain recoil if you were to use it on a real bolt rifle? I use it on the VSR-10 G-spec. Is that shaking thing suppossed to be on the scope(only if touched by hand) or should I return it and get a Tasco or any other brands? I have another Tasco same as this one, but no shaking. The guy at the store suggested this scope, so I went for it. Please advise..whoever has the same scope and tell me if you have this shaking thing(try moving the end with your fingers easily...side to side or up down and I believe you should notice the click,click).
Thank you very much,
Danny

[Greylocks]

If you mean the scope itself is loose, that is not normal at all. Scopes meant for real guns will have no problems dealing with an airsoft gun.

[dami]

roger that and it did have a problem. Guy at Lebaron shaked it and listened; it was like kling kling kling...... Something was definitly wrong with it. The exchanged one...same brand and model..... that I have now it's ok for now .
Thank you,
Danny