WE M4A1 Selector Switch Loose

[Uberg33k]

I noticed today that my WE gbb's selector switch is loose after swapping grips. Now I did find a small metallic nub and I know that must be from that. I have no experience taking apart a gbb apart from disassembling for regular maintenance. Can anyone advise me on how or what I need to do to fix it? Thanks!

[St. Ides]

The metal nub is the fire selector detent, should be a spring that goes with it.......There are videos on YouTube showing how to assemble the AR15, same process for your WE gbbr pistol grip install as the real AR

[Uberg33k]

Originally Posted by St. Ides

The metal nub is the fire selector detent, should be a spring that goes with it.......There are videos on YouTube showing how to assemble the AR15, same process for your WE gbbr pistol grip install as the real AR

Wait, so the spring that was attached to the stock grip is what you're taking about?

[St. Ides]

Yes, spring and detent go back in the gun! hit youtube up for a tutorial

[St. Ides]

https://www.youtube.com/watch?v=6SF2IXgeO0g

[Uberg33k]

Originally Posted by St. Ides

https://www.youtube.com/watch?v=6SF2IXgeO0g

Cool thanks, but unfortunately it doesn't show which way or how the detent goes. So you know? Smaller end diameter in the spring end perhaps?

Oh also does the safety have to be set to anything specific when reinstalling it?

[St. Ides]

Keep on safe, should be a rounded end or pointy end...that end goes in towards the safety selector

[Uberg33k]

Originally Posted by St. Ides

Keep on safe, should be a rounded end or pointy end...that end goes in towards the safety selector

Okay thanks. There is a round end and the slightly smaller flat end. I'll try it tomorrow. Thanks again.