Fortis F1 mount alternatives

KrisD · January 20th, 2015, 19:23

Is there a cheaper version of the Fortis F1 mount available out there? A repro of some sort perhaps? And if someone has first hand experience with this mount, how do you like it?

pestobanana · January 20th, 2015, 19:39

I don't know of any repros. The mount is pretty good, I don't know what else to say. Its a mount, and it mounts real steel optics. Doesn't do anything fancy, isn't QD.

Make sure you remember that it only fits real steel T1 spec optics.

Danke · January 20th, 2015, 19:46

Real one's only $99. What's your budget?

BioRage · January 20th, 2015, 19:54

Fortis repro grips:

http://samoon.com.tw/index.php?route...lter_name=grip

No mounts doe.. So you can save on the grips

KrisD · January 21st, 2015, 03:05

Thanks guys!

The repro grip is a plus. My budget was under $50 since I was planning to buy the primary arms md06 red dot. Too bad primary arms is OOS after their $50 sale. Now it's like $99-$125 everywhere. meh

BioRage · January 21st, 2015, 09:53

I also thin EBAIRSOFT has them, and they include shipping, so check them out too. (Grips,).

Danke · January 21st, 2015, 11:55

If it's $50 all in I'd just wait for this to restock.

http://airsoftdepot.ca/catalog/produ...roducts_id=105

It's as close as you'll get.

pestobanana · January 21st, 2015, 17:43

Just a heads up though, I currently use the RS Fortis grip, and I've played with the repro ones. The repro ones are actually REALLY terrible repros... You can actually see where the paint was dripping on the drying rack. If you don't care about quality and just want the look then its a good buy.

beta678 · January 21st, 2015, 17:52

The PA MD-06 isn't in production anymore so if you find any left over stock for cheap, grab it. I've still got one from a while back just sitting in its box waiting for a build to slap it onto.

The new MD-RBGII (2moa dot vs the old 3moa) and the FBGII should be pretty much the same quality wise but Primary Arms RDS' are somewhat of a bitch to get in country since PA doesn't ship outside of the US.

BioRage · January 22nd, 2015, 11:54

Fortis reproooo stuffz:

Gas Block

Rails

Magnaroth · January 26th, 2015, 19:59

Redwolf also has the Fortis PTS stuff. I'd be quite worried about the durability of the F1 Repro, as there isn't much to the mount. If you dropped your gun, and it landed on the mount, I'd be concerned.

I love my F1 mount. It was expensive, but it helped cut a few grams off the weight of my rifle, and that's awesome.

pestobanana · January 26th, 2015, 20:02

Quote:

Originally Posted by biorage

fortis reproooo stuffz:

gas block

rails

awweeee shietttt dat gas block will be mine

Magnaroth · January 26th, 2015, 20:31

Oh Snap: Looks like Airsoftdepot has the Fortis PTS too!

KrisD · January 26th, 2015, 23:00

I think I'm going to pick this one up as well when its released. Ill let you guys know how fragile it is when I eventually get it. http://www8.wgcshop.com/wgc2008/main...&view_choice=b

KrisD · January 26th, 2015, 23:04

Quote:

Originally Posted by Danke

If it's $50 all in I'd just wait for this to restock.

http://airsoftdepot.ca/catalog/produ...roducts_id=105

It's as close as you'll get.

That would probably fit the real steal fortis mount right? Im worried it will be loose or to large for the mount.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 20th, 2015, 19:23	#1
KrisD Trader rating Join Date: Jan 2014 Location: Mississauga, Ontario	Fortis F1 mount alternatives Is there a cheaper version of the Fortis F1 mount available out there? A repro of some sort perhaps? And if someone has first hand experience with this mount, how do you like it?

January 20th, 2015, 19:46	#3
Danke Prancercise Guru Trader rating Join Date: Oct 2007 Location: Danger Zone	Real one's only $99. What's your budget? __________________ Airsoft, where nothing is hurt but feelings.

January 21st, 2015, 11:55	#7
Danke Prancercise Guru Trader rating Join Date: Oct 2007 Location: Danger Zone	If it's $50 all in I'd just wait for this to restock. http://airsoftdepot.ca/catalog/produ...roducts_id=105 It's as close as you'll get. __________________ Airsoft, where nothing is hurt but feelings.

January 20th, 2015, 19:39	#2
pestobanana Squid Porn Superstar, I love the tentacles! Trader rating Join Date: Nov 2008 Location: Richmond Hill and Waterloo, Ontario	I don't know of any repros. The mount is pretty good, I don't know what else to say. Its a mount, and it mounts real steel optics. Doesn't do anything fancy, isn't QD. Make sure you remember that it only fits real steel T1 spec optics.

January 20th, 2015, 19:54	#4
BioRage Trader rating Join Date: Nov 2008 Location: Toronto	Fortis repro grips: http://samoon.com.tw/index.php?route...lter_name=grip No mounts doe.. So you can save on the grips

January 21st, 2015, 03:05	#5
KrisD Trader rating Join Date: Jan 2014 Location: Mississauga, Ontario	Thanks guys! The repro grip is a plus. My budget was under $50 since I was planning to buy the primary arms md06 red dot. Too bad primary arms is OOS after their $50 sale. Now it's like $99-$125 everywhere. meh

January 21st, 2015, 09:53	#6
BioRage Trader rating Join Date: Nov 2008 Location: Toronto	I also thin EBAIRSOFT has them, and they include shipping, so check them out too. (Grips,).

January 21st, 2015, 17:43	#8
pestobanana Squid Porn Superstar, I love the tentacles! Trader rating Join Date: Nov 2008 Location: Richmond Hill and Waterloo, Ontario	Just a heads up though, I currently use the RS Fortis grip, and I've played with the repro ones. The repro ones are actually REALLY terrible repros... You can actually see where the paint was dripping on the drying rack. If you don't care about quality and just want the look then its a good buy.

January 21st, 2015, 17:52	#9
beta678 ASC's navel of the year! Trader rating Join Date: Feb 2007 Location: Vancouver, BC	The PA MD-06 isn't in production anymore so if you find any left over stock for cheap, grab it. I've still got one from a while back just sitting in its box waiting for a build to slap it onto. The new MD-RBGII (2moa dot vs the old 3moa) and the FBGII should be pretty much the same quality wise but Primary Arms RDS' are somewhat of a bitch to get in country since PA doesn't ship outside of the US. __________________ Just your friendly neighborhood narcissist gearwhore.

January 22nd, 2015, 11:54	#10
BioRage Trader rating Join Date: Nov 2008 Location: Toronto	Fortis reproooo stuffz: Gas Block Rails

January 26th, 2015, 19:59	#11
Magnaroth Trader rating Join Date: Mar 2012 Location: Waterdown	Redwolf also has the Fortis PTS stuff. I'd be quite worried about the durability of the F1 Repro, as there isn't much to the mount. If you dropped your gun, and it landed on the mount, I'd be concerned. I love my F1 mount. It was expensive, but it helped cut a few grams off the weight of my rifle, and that's awesome. __________________ Guardians of Asgaard

January 26th, 2015, 20:31	#13
Magnaroth Trader rating Join Date: Mar 2012 Location: Waterdown	Oh Snap: Looks like Airsoftdepot has the Fortis PTS too! __________________ Guardians of Asgaard Last edited by Magnaroth; January 26th, 2015 at 23:16..

January 26th, 2015, 23:00	#14
KrisD Trader rating Join Date: Jan 2014 Location: Mississauga, Ontario	I think I'm going to pick this one up as well when its released. Ill let you guys know how fragile it is when I eventually get it. http://www8.wgcshop.com/wgc2008/main...&view_choice=b

Fortis F1 mount alternatives

Accessories Discussion