|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
March 4th, 2013, 16:23 | #1 |
M16 Vs M14
Hello Everyone, I was curious too see what everyone thought between these two AEG's, the pros and cons of each. And why one would be more practical to purchase over the other.
To be honest, do not know much about the M16 in the Airsoft world. general reviews of the gun, specific companies which are better and worse in the field of manufacturing of this aeg. Thank you very much |
|
March 4th, 2013, 16:29 | #2 |
"bb bukakke" KING!
|
it's all cosmetics. While the v2 is probably easier to work on than a v7 or v7 hybrid (for CA and g&g) all AEGs can be made to shoot the same range and fps and rate of fire. It's what you like the look of or want to haul around the field. I found the soc16 heavy and cumbersome to haul around the field, hence why I went in the opposite direction and got a p90. My g36 at full length is still easier to handle than the soc16 as well.
All 3 of my guns shoot out to 60m accurately with ease which is farther than almost all engagements I've come across.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. |
March 4th, 2013, 17:01 | #3 |
Captain Awesome
|
The m14 is a bit dated. The full length is cumbersome and akward to wield. The socom is easier but still not very ergonomical or comfy. The guns themselves are sexy and good platforms to build on, offering options such as the ebr and jae body's and any internal upgrade you desire. But it's the mags which are large and akward, reloading wich is finite adjusting the hopup which is tedious and the fact Taft you will not be able to interchange with squad mates are downfalls
The ar series are as well a great platform to build from. Fully customizable anything you want to mix match on there to suit your physique personality and role. The m16 like the 14 is long and cumbersome but it makes up for it in its ergonomics. The pistol grip, slim mags interchangeability popularity make this the likely platform to choose. In the future should you decide to go to another ar platform be it the carbine, cqb, sr, sog ect the muscle memory and wield ability is transferable. Web if you decide to go to another platform like the scar, Masada, ect they are essentially derivatives of the ar platform and use similar dexterity points for muscle memory. The m14 is the pinnicle of its generation, the final evolution of its platform. The m16 is the base or beginning of its platform constantly being improved upon or modified. Apart from the mechanics of them with the 14 you need to build you kit around it and specific to it. The ar series most every gear component is designed with it in mind so it is versatile. |
March 4th, 2013, 17:18 | #4 |
When i look around i tend to find the m16 to be cheaper than the m14, I found this within G&G prices. In contrast Echo1 is more expensive than G&G but from what I have seen Echo1 is poorer in quality than G&G. Once again I am new, but what would cause this price dfference?
|
|
March 4th, 2013, 17:32 | #5 | |
Quote:
__________________
Primary: ICS M16A3 RAS ICS CXP.08 Secondary: TM Glock 17 |
||
March 4th, 2013, 17:42 | #6 | |
Quote:
Back to the original topic - the M16/M4 Series and the M14 Series are two totally different guns, lending themselves to totally different playing styles. I've got both, and each serve their own purpose. If i want to be more physically active/moving on the field, or working in a squad situation, the M4's get the nod. If i want to be a little more relaxed, do some camping in the bush/woods on over-watch and be a little more stand-offish, the scope-equipped M14 gets it's turn. I do use the M4's more often than the M14, but both are fun in their own ways. I do recommend an M16/M4 series as a first gun to start off with, given the pick between the two. Consider other designs as an additional primary, only after you've got yourself sorted with your M16/M4 kit. Last edited by HackD; March 4th, 2013 at 17:53.. |
||
March 4th, 2013, 17:52 | #7 |
Is it much harder to find G&G parts though?
|
|
March 4th, 2013, 17:57 | #8 |
Considering that G&G/CA are proprietary non-TM designs, yes parts/magazines are relatively hard to come by in comparison to the availability of TM parts.
|
|
March 4th, 2013, 20:13 | #9 |
Squid Porn Superstar, I love the tentacles!
|
|
March 4th, 2013, 20:17 | #10 |
^^
Are there any other companies compatible with G&G? |
|
March 4th, 2013, 20:51 | #11 |
Squid Porn Superstar, I love the tentacles!
|
|
March 4th, 2013, 20:58 | #12 |
Nothing specific at the moment, to be honest I;m not sure what I would change most likely the spring first but after that i am not sure. But I am asking these questions so that I can make a smart purchase, which will turn into an investment
Last edited by Fortyeiight; March 4th, 2013 at 21:05.. |
|
March 4th, 2013, 21:06 | #13 | ||
"bb bukakke" KING!
|
Quote:
Quote:
Availability on mags for CA/G&G m14s is an issue... moreso than the gearbox parts. I would say CA specific parts are harder to get than G&G... I've tried to contact CA for factory parts, who refer me to their vendor chain... which never seem to answer me or get back to me if they can get the parts I need at all. Mind you, this was a different gun platform, but you can insert whatever gun type you want in there and the result still would've been the same. When I look up this sect of m14s, I find a more than a few instances of the stock cracking, maybe it doesn't happen on all guns all the time, but it has happened enough that people post about not being able to find a worthy replacement stock. Also fyi... the G&G stock seems to not like the CA innards as much as reported by a couple owners. I know this because I researched the stocks when mine broke. the G&G stock is easily available from the factory direct though, just email them and ask, they take your payment info and a new stock is on the way from taiwan. Not ideal, but far more response than I got out of CA about gearbox shells. Other issues? since I own a g&g max m14 socom I can tell you exactly what has happened to it over 20,000 rounds through it. The stock broke when a shitty ebay sling mount gave up and it dropped on floor. It cracked straight through at the magwell after a game, I'm not sure if it was from a drop or if it was just torqued... or if the rail I have on it puts stress on it in a weird way. Some mighty putty and 2 stage epoxy fixed it up nice and good. Mechanically? None so far as to what a lot of people complain about with older g&gs... The trigger is copper tabs and metal block like V2s... the gearset is strong enough that the shimming hasn't blown them up. The motor is fine, cutoff lever is holding up, even when I ran it on an 11.1V lipo through the mosfet that's now in my p90 for about 1000 rounds. The airseal on the gun is amazing... getting more fps than on a guarder sp110 than it's rated for. 420fps when it's tested at 405 in every other gun I own. I couldn't believe it. It shot consistently 410 or higher without me touching anything else. On my p90 and g36 I had to do all the airseal tricks. I ran it for a season on a large 9.6v 4000mah pack. The only thing I've done to it is put the factory m100 spring into it and change the piston out, because after 10k rounds, the factory one showed starting signs of wear on the teeth, and I decided since I was in the gearbox, I should replace it with a metal rack piston. Someone once complained that the hopup could be turned so tight that the rubber would tear... I turned it up all the way and shot the gun.. unknowingly turning it up super high because I couldn't spot the rounds... turns out they were hopping to the moon. Factory rubber still in the gun no worse for wear. Don't get me wrong, I'm not praising the gun nor hating on it. It has it's ups and downs, the mag cost and stock being big concerns. But then again, my p90 and g36 have also had their share of issues and they're not short lists nor simple either. But in terms of gaming the gun itself, if you paid for the mags, have the pouches, have the gun.. the question is, are you happy with it? I enjoyed it, I think my socom looks bitchin and it shoots bitches just fine. Would I lug it around for 24 hours? I've addressed this before, and the answer is no, probably not. It's a heavy beast, with or without the rail I put on it. Money aside and given the choice again, would I buy it again if I didn't own it? Probably not.. it's heavy, and as good as it looks, it turned out to be too heavy for me, even though it's a great performer. It's proven itself time and time again to be reliable on the field and consistent/accurate. Looking solely ate the cost, Given the cost of ownership of a g&g, or CA would I do it again? probably not. The CYMA is far cheaper, fully upgradable with TM components and readily available mags. If I had the gearbox knowledge that I have now, I would go for a cheaper gun and spend the difference in upgrade parts. At the time of purchase the gun itself was a reasonable price for a fully factory upgraded gun. The mag cost was higher, which I accepted because I wanted a different gun than an m4.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. Last edited by lurkingknight; March 4th, 2013 at 21:14.. |
||
March 4th, 2013, 21:16 | #14 |
Okay, which gun feels better in your hand??
|
|
March 4th, 2013, 21:46 | #15 | |
Squid Porn Superstar, I love the tentacles!
|
Quote:
Anything you need will be available. |
|
|
Bookmarks |
Thread Tools | |
|
|