KSC MP7 to External Air

[aZn_triXta07]

YouTube- KSC MP7 GBB SMG on HPA



I got bored

No modification was done to the magazine.

This is a fitting purchased from Japan, there are fittings available for WA/Marui, KSC/KJW, and WA Magna

[Daiviet]

christ that thing sounds mean!

[Stealthee]

Is something like that hard to install?

[aZn_triXta07]

Nope, you just unscrew the stock fill valve in the magazine and install the new one and viola

Only some modification is required if the magazine base plate hole is too narrow and you need to make it bigger so the fitting can go through.

[cjboi]

that's something easy to do, just that if you keep dry firing your gun. It will eventually freezes the oring's that supports those valves and eventually break.
Nice gun by the way :duke:

Originally Posted by Stealthee

Is something like that hard to install?

[aZn_triXta07]

Originally Posted by cjboi

that's something easy to do, just that if you keep dry firing your gun. It will eventually freezes the oring's that supports those valves and eventually break.
Nice gun by the way :duke:

There's very little cooldown, I'd hafta crank the pressure up to like 300psi for something like that, I'm at about 130psi.

I also inject the inside of the magazine with silicone oil.

[GBear]

Reminds me of paintball. :P

[Forever_kaos]

Originally Posted by GBear

Reminds me of paintball. :P

Reminds me of really new guys who don't know about classic airsoft.

Anyways, cool stuff!
I hope to do this with a pistol of mine sometime soon. Do you pickup the different valves at a Paintball shop or where would one find them?

[aZn_triXta07]

They are only available from Japan.

The store only sells to Japanese only, I had a friend pick it up and send it over here.

Originally Posted by Forever_kaos

I hope to do this with a pistol of mine sometime soon. Do you pickup the different valves at a Paintball shop or where would one find them?

Originally Posted by GBear

Reminds me of paintball. :P

GTFO my thread noob, luv u <3

[pusangani]

How quick is it to swap mags with this system? does it slow down your reloads alot?

[aZn_triXta07]

Originally Posted by pusangani

How quick is it to swap mags with this system? does it slow down your reloads alot?

There's a quick disconnect, it just adds one step to reloading.

Disconnect, release mag put in pouch, fresh bag in, reconnect

[pusangani]

ahh ok, so no screwing on or off of the hose thingy, this would be good for rifles and smg's I think as they suffer worse cooldown than pistols

[aZn_triXta07]

Originally Posted by pusangani

ahh ok, so no screwing on or off of the hose thingy, this would be good for rifles and smg's I think as they suffer worse cooldown than pistols

This was originally designed because in Japan they have shitty HFC134 and it's inconsistent so its purpose is for IPSC especially for 1911 single-stack magazines.

However this is really good for cool weather games, eliminating cool-down makes it alot more fun, I need to test this fitting on WE M4 Magazines.

I've got one of each fitting and just testing it out with guns.

[pusangani]

Not sure I'd use this for CAPS tho, every second counts!

unless you are as fast as this guy lol

YouTube- The Crazy Speed Steel Challenge Air Soft

[aZn_triXta07]

Well...you could rig up several hoses to each mag LOL but that'd look weird.

Meh ... CAPS ...if I want to do target shooting I'll go with real steel.

If I want to shoot friends I use airsoft lol