US Navy SEALs

Dingo · December 17th, 2011, 21:31

I know that the TMC AOR-2 just needs to be died a bit more, but the TMC AOR-1 is way off.

Tacblue · December 21st, 2011, 23:38

"I know that the TMC AOR-2 just needs to be died a bit more, but the TMC AOR-1 is way off. "

Really? I've been trying to fade my TMC AOR2. The color seems to be overall too dark, though the basic tones are about right. The color is quite persistant though, even to bleach. Though it did lighten it a little bit. Now I've taken to leaving it spread out on a table in the backyard to try and sun fade it.

Ferro, thanks for the information, I've joined and seen a couple of loadout pics that seem to show the differences, though it's still a little difficult to see. A lot of photos seemed to have been removed. Anyway, at least I've got a little more of an idea now. Got a couple of the TMC pouches on the way to compare to the replica BDUs, so hopefully they're compatible. Granted, it might not be the perfect color, but if I can get the gear and BDUs to match, I'll be satisfied, even if it's not the genuine article.

Shirley · December 21st, 2011, 23:41

You can either buy a small portion of real AOR2, or a patch, then see the colour.
If not, what I would do is spray a bit of krylon tan on your gear and that can give it a good used look.

Dingo · December 22nd, 2011, 15:00

Well if you have repro AOR-1 pouches, and repro AOR-1 combats from the same company, they're going to match. My dad said sent me some Crye AOR-1 pouches he bought of one of his DEV buds. Ill post them when they arrive.

Tacblue · December 22nd, 2011, 15:09

"You can either buy a small portion of real AOR2, or a patch, then see the colour."

The BDUs I'm using are UR-Tactical BDUs, which are genuine AOR2 ripstop. The color is extremely light compared to TMC, but will be about spot on once the TMC fades a bit further. Hopefully I'll be able to take a pic of the contrast on my next days off.

Dingo · December 22nd, 2011, 15:24

Oh and in my post I didnt mean the entire thing needed to be died more, I should have said certain colours. Like in this pic:http://www.thebeijingshop.com/images...ura%20AOR2.jpg. The tan and the green could be died a bit more, but the colours are fairly close. Now in this pic:http://www.thebeijingshop.com/images...%20AOR1%20.jpg pretty much every colour is off and almost has a pinkish tone to it.

rc_p120 · December 22nd, 2011, 21:53

We're talking about a slight fading on a couple shades of colour here. Let me ask you something; would a real Navy SEAL really give a shit?

Dingo · December 22nd, 2011, 22:32

Let me ask you something; would a real Navy SEAL want replica gear thats going to tear and shred during an op?

rc_p120 · December 22nd, 2011, 22:41

I wasn't talking about replica vs real, that's obvious. I was talking about the green being half a shade off.

Allow skd-tac to illustrate my point

http://www.skdtac.com/skd_tactical_FAQ_a/140.htm#15

Dingo · December 22nd, 2011, 22:56

I dont think theyd care about shades, they care about quality.

Tacblue · December 23rd, 2011, 01:06

Ghillisnipes: My TMC AOR1 pouch arrived last night, so I was able to take a quick look and comparison. The photos on the various store websites actually make it look much brighter than it is. For anyone curious, the colors really do almost perfectly match the AllWin/Trigger AOR1 replicas. Match genuine AOR1, apparently not since the AllWin stuff doesn't, but not HORRIBLY far off judging from a pic of someone wearing a Ferro 6094 with the replica BDUs. Enough to tell, perhaps, but enough to care? Meh...
As to quality, for anyone wondering, the TMC stuff is sufficient for airsoft. Pretty decent actually, in light of the price, and I can personally confirm it's better than some of the stuff I've used for work! I'm not worried about it falling apart in the least. Now if only they'd make some frikkin' M60 pouches!

Conker · December 23rd, 2011, 01:10

And if it's not too much... what did you use for work? (to have a comparison basis)

I haven't handled any of the TMC AOR1 stuff (I have some of their stuff in MJK though) and I can say I hate their AOR1 series because they use folded Cordura instead of printed webbing... and, well, that's ugly as fuck, and doesn't work as well.

ShadowNet · December 23rd, 2011, 01:21

Quote:

Originally Posted by Conker

I haven't handled any of the TMC AOR1 stuff (I have some of their stuff in MJK though) and I can say I hate their AOR1 series because they use folded Cordura instead of printed webbing... and, well, that's ugly as fuck, and doesn't work as well.

What are the negatives to folded Cordura webbing aside from aesthetics?

Dingo · December 25th, 2011, 01:12

Hey Tacblue, can you take pics of the TMC AOR-1 and post it here?

Trader rating · December 25th, 2011, 08:51

Quote:

Originally Posted by ShadowNet

What are the negatives to folded Cordura webbing aside from aesthetics?

It'll come apart eventually. It's not webbing....and someone invented webbing because it was *better than folded up cordura*.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 21st, 2011, 23:41	#588
Shirley A-56 aka Mr.Hitman Trader rating Join Date: Nov 2007 Location: Toronto, ON	You can either buy a small portion of real AOR2, or a patch, then see the colour. If not, what I would do is spray a bit of krylon tan on your gear and that can give it a good used look. __________________ CANADIAN AIRSOFT PRACTICAL SHOOTING (CAPS) CAPS DIRECTOR # 0047

December 22nd, 2011, 21:53	#592
rc_p120 Trader rating Join Date: May 2002 Location: Toronto, Canada	We're talking about a slight fading on a couple shades of colour here. Let me ask you something; would a real Navy SEAL really give a shit? __________________ SILENT PULSE My archived Buy and Sell user ratings Last edited by rc_p120; December 23rd, 2011 at 00:14..

December 22nd, 2011, 22:32	#593
Dingo aka GhillieSnipes Trader rating Join Date: Sep 2010 Location: Western B.C.	Let me ask you something; would a real Navy SEAL want replica gear thats going to tear and shred during an op? Last edited by Dingo; December 22nd, 2011 at 22:43..

December 17th, 2011, 21:31	#586
Dingo aka GhillieSnipes Trader rating Join Date: Sep 2010 Location: Western B.C.	I know that the TMC AOR-2 just needs to be died a bit more, but the TMC AOR-1 is way off.

December 21st, 2011, 23:38	#587
Tacblue Trader rating Join Date: Nov 2007	"I know that the TMC AOR-2 just needs to be died a bit more, but the TMC AOR-1 is way off. " Really? I've been trying to fade my TMC AOR2. The color seems to be overall too dark, though the basic tones are about right. The color is quite persistant though, even to bleach. Though it did lighten it a little bit. Now I've taken to leaving it spread out on a table in the backyard to try and sun fade it. Ferro, thanks for the information, I've joined and seen a couple of loadout pics that seem to show the differences, though it's still a little difficult to see. A lot of photos seemed to have been removed. Anyway, at least I've got a little more of an idea now. Got a couple of the TMC pouches on the way to compare to the replica BDUs, so hopefully they're compatible. Granted, it might not be the perfect color, but if I can get the gear and BDUs to match, I'll be satisfied, even if it's not the genuine article.

December 22nd, 2011, 15:00	#589
Dingo aka GhillieSnipes Trader rating Join Date: Sep 2010 Location: Western B.C.	Well if you have repro AOR-1 pouches, and repro AOR-1 combats from the same company, they're going to match. My dad said sent me some Crye AOR-1 pouches he bought of one of his DEV buds. Ill post them when they arrive.

December 22nd, 2011, 15:09	#590
Tacblue Trader rating Join Date: Nov 2007	"You can either buy a small portion of real AOR2, or a patch, then see the colour." The BDUs I'm using are UR-Tactical BDUs, which are genuine AOR2 ripstop. The color is extremely light compared to TMC, but will be about spot on once the TMC fades a bit further. Hopefully I'll be able to take a pic of the contrast on my next days off.

December 22nd, 2011, 15:24	#591
Dingo aka GhillieSnipes Trader rating Join Date: Sep 2010 Location: Western B.C.	Oh and in my post I didnt mean the entire thing needed to be died more, I should have said certain colours. Like in this pic:http://www.thebeijingshop.com/images...ura%20AOR2.jpg. The tan and the green could be died a bit more, but the colours are fairly close. Now in this pic:http://www.thebeijingshop.com/images...%20AOR1%20.jpg pretty much every colour is off and almost has a pinkish tone to it.

December 22nd, 2011, 22:41	#594
rc_p120 Trader rating Join Date: May 2002 Location: Toronto, Canada	I wasn't talking about replica vs real, that's obvious. I was talking about the green being half a shade off. Allow skd-tac to illustrate my point http://www.skdtac.com/skd_tactical_FAQ_a/140.htm#15 __________________ SILENT PULSE My archived Buy and Sell user ratings

December 22nd, 2011, 22:56	#595
Dingo aka GhillieSnipes Trader rating Join Date: Sep 2010 Location: Western B.C.	I dont think theyd care about shades, they care about quality.

December 23rd, 2011, 01:06	#596
Tacblue Trader rating Join Date: Nov 2007	Ghillisnipes: My TMC AOR1 pouch arrived last night, so I was able to take a quick look and comparison. The photos on the various store websites actually make it look much brighter than it is. For anyone curious, the colors really do almost perfectly match the AllWin/Trigger AOR1 replicas. Match genuine AOR1, apparently not since the AllWin stuff doesn't, but not HORRIBLY far off judging from a pic of someone wearing a Ferro 6094 with the replica BDUs. Enough to tell, perhaps, but enough to care? Meh... As to quality, for anyone wondering, the TMC stuff is sufficient for airsoft. Pretty decent actually, in light of the price, and I can personally confirm it's better than some of the stuff I've used for work! I'm not worried about it falling apart in the least. Now if only they'd make some frikkin' M60 pouches!

December 23rd, 2011, 01:10	#597
Conker Trader rating Join Date: Jan 2007 Location: Canada / Ireland / USA	And if it's not too much... what did you use for work? (to have a comparison basis) I haven't handled any of the TMC AOR1 stuff (I have some of their stuff in MJK though) and I can say I hate their AOR1 series because they use folded Cordura instead of printed webbing... and, well, that's ugly as fuck, and doesn't work as well. __________________ WTS: King Arms/Madbull Mk18 Mod1 - VFC Mk17 SCAR-H midcap mags, FDE - VFC Mk17 SCAR-H + PWS rail, FDE WTB/WTT: CSOR gear, BFG, Tyr, Crye, etc

December 25th, 2011, 01:12	#599
Dingo aka GhillieSnipes Trader rating Join Date: Sep 2010 Location: Western B.C.	Hey Tacblue, can you take pics of the TMC AOR-1 and post it here? Last edited by Dingo; December 25th, 2011 at 16:12..

US Navy SEALs

USA