April 12th, 2008, 02:07 | #31 |
Red Wine & Adderall
|
I only paid 90 dollars to get my PAL.
__________________
"Its only a little bit on fire" |
April 12th, 2008, 02:11 | #32 | |
Quote:
What in the hell? $30 to the trainer, $60 to the govn't. I know I did bad at math, but I honestly thought that $30 plus $60 equaled $90. Boy am --I-- dumb. |
||
April 12th, 2008, 03:30 | #33 | |
Quote:
If enough people wanted one I'd support it on principle, but it just doesn't seem necessary to me. 30 bucks for a trainer? My restricted/non restricted courses cost about 200 bucks, and that was a discounted rate. |
||
April 12th, 2008, 03:54 | #34 |
The price varies but it CAN get as high as 400 bucks. easily.
200 - 225 for the full two day safety course 30 for the books 60 for the application 150 - 300 for a gun club membership (required for restricted PAL) Sure you could just challenge the exam and pay the application fee but do you really want a bunch of new shooters out there who have never been taught properly? |
|
April 12th, 2008, 15:04 | #35 |
Wow it's expensive to get your Restricted PAL in Ontario. Out here it's $160-$195 for the 2 day course including books, $60 for the application.
You don't need the gun club membership to get the PAL, you need it to get the ATT when you purchase the gun, otherwise it's useless for you to have a gun that just sits at your house because you can't take it anywhere. Most good clubs usually wave the membership fees as long as you do their introduction to their range course. Couple hours around $80 here. To challenge the exam, in BC at least, you have to write the exam at a licensed training facility to prove that you know how to handle the gun, so it's not as simple as untrained, new shooters getting it. |
|
April 12th, 2008, 15:08 | #36 | |
Quote:
theres no way im giving up firearms for a lady. no matter what.
__________________
"Lieutenant John Chard: The army doesn't like more than one disaster in a day. Bromhead: Looks bad in the newspapers and upsets civilians at their breakfast." - ZULU (1964) |
||
April 12th, 2008, 15:19 | #37 |
Hey Folks,
Its great to see that the interest in IPSC airsoft has come around. I have been shooting IPSC for years now and to see it come to airsoft shows the progression of airsoft in canada. Just a factor that I did not see on this thread is that you guys did not mention the fact that not only do you have to get the proper licences (PAL), a gun, gear and a club. You also have to have atleast 1 year of experience shooting, cuz if you can't hit a 8x11 at 10 meters, then it'll take you a while to complete the IPSC course. Which brings me to my next point...to shoot any IPSC sanctioned matches, you have to do a Black badge course. The course runs a few times in a year in Ontario at different ranges. You do a friday night briefing/class then sat and sun are total shooting from 9 to 4. Yup, at average you will shoot about 300-400 rnds easy. The cost of the Black badge course is about $100. Then you have the yearly Black badge dues which runs $70. You have to complete these before you can pass the Black badge course: Black Badge Course Outline Load and Unload & Range Commands 7 Meters - Draw & Fire One Round - 6 times - No Time 15 Meters - Draw & Fire One Round - 6 times - No Time 7 Meters - Draw & Fire One Round - 6 times - 2 Seconds 7 Meters - Draw & Fire Two Rounds - 6 times - No Time 15 Meters - Draw & Fire Two Rounds - 6 times - No Time 7 Meters - Draw & Fire Two Rounds - 6 times - 2 Seconds 15 Meters - Draw & Fire Two Rounds - 6 times - 3 Seconds 10 Meters - Fire Two Rounds/Reload/Fire Two Rounds - 3 times - 7 or 10 Seconds Malfunction Clearing 10 Meters - Draw & Fire Two Rounds S/H/O* - 3 times - 3 Seconds 10 Meters - Draw & Fire Two Rounds W/H/O* - 3 times - 4 Seconds 25 Meters - Draw / Prone* & Fire Two Rounds - 3 times - No Time 15 Meters - Draw & Fire Two Rounds R/S* Barricade - 3 times - No Time 15 Meters - Draw & Fire Two Rounds L/S* Barricade - 3 times - No Time Demo & Practice Lateral Movement & Obstacles 10 Meters - El Presidente* - 12 or 18 Seconds - Back to (3) targets, turn, draw and engage targets (2) rounds each, reload, re-engage targets with (2) rounds each. About ammo...I relaod my own. Its so cost effective and you can adjust your ammo specs to your liking. Back to IPSC airsoft...If you want an ru ready speed timer(non-RF), there is a place in Cawthra and Queensway which provides timers. For tragets, there is a place at Dundas and 427 that provides cardboard IPSC targets. Sorry folks for making this thread so long. If anyone is interested in running a trial IPSC night, I can talk to some people for a facility. If I can get 8 or so bodies, I can take one night to run an IPSC night here in toronto. Just pm me if you guys are interested. Thanks guys...hope this brings some light on the topic. Last edited by Shooting Chef; April 12th, 2008 at 16:34.. Reason: change directions |
|
April 12th, 2008, 15:42 | #38 |
Sounds very interesting. Count me in! ^^
__________________
Western Arms Infinity 6" Hybrid DX silver Limited Western Arms Infinity 5" Expert KSC MP7A1 KSC USP Match Kimber Warrior [Nova FMU kit] Kimber Gold Combat Stainless [Nova FMU kit] |
|
April 12th, 2008, 22:23 | #39 |
Can you give me a little more info (type of targets, website/contact info..). I've been getting by with making my own targets but it's hard to find scrap cardboard in the correct size. I've googled one website but it's in the states and i'm afraid of what the shipping cost of a large stack of cardboard would be
|
|
April 12th, 2008, 22:31 | #40 |
Hey Rob, Im not sure what company handles targets for IPSC BC. I know here in ontario, Doug Lewis does. His phone number is 416-259-1113. For 10 or more classic targets is about $30 and metric targets are about $50. I usually use patches to patch-up my shots to save on targets.
Maybe you can ask Doug if he knows anyone who handles targets for IPSC BC and he can probably lead you the right way. Good Luck. |
|
April 12th, 2008, 23:27 | #41 |
thanks,
The other option I was thinking is to go to a gun store and ask. One of these days i'll find some time and actually go outside to interact with people |
|
April 13th, 2008, 04:08 | #42 | |
Quote:
And we're not talking about milsim, we're talking about shooting paper targets with airsoft guns. Shoot paper with fake guns or shoot paper with real guns. I know what I'd like... I just find it superfluous when it's essentially more accessible to get into the real IPSC than to track down airsoft guns. Like I said, I can go down to the range and fire off a handgun to my heart's content and be within every last one of my rights as a Canadian. On top of that, buying a firearm is much easier than buying an airsoft gun. Also, if you paid 400 to get a PAL, it might explain why you have trouble typing, it looks like you got SURPRISE SEX IN THE BUMTUBE. It cost me 120 dollars for a full firearms safety course, both tests and ammo. It's just my opinion that it's pointless. It's like buying an airsoft gun for plinking... completely useless.
__________________
|
||
April 13th, 2008, 06:02 | #43 |
Formerly Muffinman
|
Hey Shooting
Just wondering, is there any place in Canada that has a website that retails those shot timers? I can't seem to find anything anywhere (even on the IPSC Canada website) and I was sort of looking for a cheapish one (Heck, even a standard Pocket Pro would do I imagine) and I wanted to know exact timing and split timing between shots, something that the Mad Bull Airsoft one can't do. btw, even with the adjustable sound-meters, they should pick up guns running on duster with plastic slides right?
__________________
|
April 13th, 2008, 12:38 | #44 |
what I've been trying to buy is a stop-plate based timer. It doesn't count shots, but you initiates the timing, it does a countdown and you start shooting, at the end you shoot the stop plate that connects to the timer and it stops the clock.
|
|
April 13th, 2008, 13:26 | #45 |
Formerly Muffinman
|
Madbull makes what you're looking for. There's a larger set (which strangely is more available, even though it's custom) with a large LED scoreboard and a timer set linked up to a final popper which is available for 250 USD + Shipping from Red Wolf.
Madbull also makes another simpler set with just a small timer linked to a popper plate, but I haven't found anyone who stocks it.
__________________
|
|
Bookmarks |
Thread Tools | |
|
|