Class 1 IR Laser

[ThunderCactus]

Why do you need visible light if you're using night vision? O_o

[ShelledPants]

Originally Posted by grantmac

Only thing I would add is visible light capability and make it look like a PEQ-15 if at all possible.

-Grant

I disagree. Small steps. Simple, strong construction, and not stepping on copyright infringement.

LDI OTAL is a good example of doing all of these things, but it's cost is still too high for many people.

[grantmac]

Fair enough. An aluminum tube configuration which can run on 18650 rechargeables would be a good starting point. Then keep the pressure switch integrated into the tailcap.

-Grant

[Azathoth]

Originally Posted by ThunderCactus

stand alone QD rail mount, pressure switch on/off (NOT a toggle like the peq-15), 2 axis adjustment, focal adjustment, under $200, and preferably with documentation verifying it's indeed class 1 IR (not just the sticker on the unit)

With all the uproar about IR lasers lately, you will sell these like BBs if you meet the class 1 requirements!

I would look at several versions of the above.

1. As stated by TC
2. Add a white light to first
3. Add LED based IR illuminator to first.

[Zack The Ripper]

Originally Posted by ShelledPants

I disagree. Small steps. Simple, strong construction, and not stepping on copyright infringement.

LDI OTAL is a good example of doing all of these things, but it's cost is still too high for many people.

Agreed. OTAL is a perfect laser. Small and compact like a DBAL in a slightly different package. Bare bones and gets the job done.

Something small like this would be awesome.

[ThunderCactus]

Simpler is cheaper, +1 on the OTAL, but for sure it needs pressure on/off instead of the toggle on/off

[Derpystronk]

If we are going to get into the realm of WHAT IFS and WISH LISTS here

Muh Dream IR Laser Only Unit:
-Offer two mounting options: Quick Detach and a typical thumbscrew / flathead screw mount. Sell these as separate units, stand alone, or include both I don't care. Options are important.
-On board activation button on the laser itself
-Ability to accept remote pressure switch
-Activation identical to PEQ - Push/Hold for momentary, double tap for constant on
-If too difficult to implement above your selector switch needs to have three settings; OFF(laser does not turn on when pushed), Momentary(hold), Tap for constant on
-AA battery for the love of god please. CR123's are great but AA batteries.
-Dials for Windage and Elevation need to have clicks(re; feedback) when turned.
-Dials for Windage and Elevation should, ideally, be adjustable with your bare fingers but if size calls for it a screw driver adjustment is okay
-Laser must set offset to the bore by an inch or so - this is to bypass triangle posts or any flipped up BUIS systems
-Make it look sexy
-Do not skimp out on size. A nice sized laser is important, but a tiny laser can feel chinsy. If you make something a tad bigger that feels solid and is indestructible, you will have a much better product.

My personal wish list. I'd write more and in a more thought out format but I'm typing this from my teeny tiny laptop and I hate writing anything on this thing.