Tippmann M4 Carbine Airsoft?

Hectic · September 11th, 2014, 12:48

im somewhat interested in this bit at the same time not, i mean we have good gbbr's that dont need a remote line (external air kinda kills it for me) rap4 tryed this in the past as far as i recall it didnt go too well. The one thing rap4 kinda did well was those oblong bb's witj the fins on them, however they dropped the ball on that too by makin them soo damn light. If they wouldda made em in a .30-.36 i think they would have been prommising, but they didnt and almost right away they had to relese an inner with hop up so we could use real bb's. Perhaps in the future tippman will refine their airsoft products but i think (as was stated) this is just a quick attempt to suplement their funds due to the decline in PB.

dreamkiller · October 14th, 2014, 18:22

So badlands paintball has gotten a hold of one, and here is the video

https://www.youtube.com/watch?v=z2erH_6qFRw

SuperHog · October 14th, 2014, 22:20

I don't think they addressed the issue players running low cap capacity with CO2 cartridges in the magazines. No shut off for reloads?

Something missing from the video. What is the input pressure for the HPA tank? They have 750ps, 550psi, and 450psi. The 750psi will have the highest recoil but loses regulation below 750psi.

-=ArchAngel=- · October 14th, 2014, 23:55

Quote:

Originally Posted by SuperHog

I don't think they addressed the issue players running low cap capacity with CO2 cartridges in the magazines. No shut off for reloads?

Something missing from the video. What is the input pressure for the HPA tank? They have 750ps, 550psi, and 450psi. The 750psi will have the highest recoil but loses regulation below 750psi.

tbh i dont think that was an issue, rather than a design/business decision (although a crappy one imo).

AngelusNex · October 15th, 2014, 09:05

Really disappointed in the fact they didn't fix the mag design to not vent. Knowing someone with connection to tipman, he was informed that it was being changed as that was why they were postponed from their original late August release date.

dreamkiller · October 15th, 2014, 11:14

Quote:

Originally Posted by AngelusNex

Really disappointed in the fact they didn't fix the mag design to not vent. Knowing someone with connection to tipman, he was informed that it was being changed as that was why they were postponed from their original late August release date.

well maybe they are still doing that (hopefully), because they still haven't really released the product. From the video, it seems that the gun they were reviewing had scratched paint, possibly a beta gun?

SuperHog · October 15th, 2014, 14:19

Quote:

Originally Posted by dreamkiller

well maybe they are still doing that (hopefully), because they still haven't really released the product. From the video, it seems that the gun they were reviewing had scratched paint, possibly a beta gun?

I doubt they will correct the magazine issue. They stuffed a lousy Tippmann 98 blow back system into it. Do you think they will redesign it to use the better Phenom bolt system .

I also doubt they will incorporate an internal regulator so you will get velocity consistency from either a 450psi, 550psi or 750psi HPA tank. An airbleed screw is lame and getto.

siggypoo · October 15th, 2014, 14:29

Phenom is fine, as long as it's the X7...

dreamkiller · October 15th, 2014, 16:10

yeah phenom's core would've been better. Maybe they'll do that for a higher end model in the future. But right now, the only thing is the mag issue that's bothering me.

Adrenalineguy · November 19th, 2014, 17:34

Tippmann is shipping a few M4's this week. pre sales will be filled first . then

We will have a limited number of units available for sale by the week end or maybe Monday

Call now to pre book yours.
HPA tanks and lines readily available
519 453 0434

SuperHog · November 19th, 2014, 20:51

Shouldn't this be in the retailer section?

bookyle · November 20th, 2014, 22:18

Quote:

Originally Posted by dreamkiller

yeah phenom's core would've been better. Maybe they'll do that for a higher end model in the future. But right now, the only thing is the mag issue that's bothering me.

I think the gun wasn't intended to be ran with CO2. The CO2 option was probably just added so that people who don't have a CO2 line set up yet can test the gun in their back yard until their external source get set up.

Matt 'Maverick' Watts · November 21st, 2014, 11:35

The internals are based on tippmann's inline blowback internals for several reasons; 1) can easily run on either CO2 or HPA, 2) can provide a much better recoil than the smoother flexvalve engine 3) is damn near indestructable 4) super easy to work on if needed.

bookyle · November 25th, 2014, 04:23

Anyone got theirs? Do a review? Does the upper have real steel threads?

From what I seen/read it has a replica barrel nut that has the dimension of "teeth" right, but the face is flat, so some rails, in particular the Troy battle rails, do not fit. The magpul MOE handguard (not PTS) does fit.

Adrenalineguy · November 25th, 2014, 20:24

I received the first shipment today. we are shipping the pre orders tomorrow.
I picked mine personal one by finding the lowest serial number #130

-I am very impressed so far.
--Feels solid, not to heavy but a good weight.
-stock solid , (release lever is medium.)
-the for grip is nylon but tight and nicely done
-front and rear flip up sights Plastic but good quality
-Body Metal, good thickness and tight fitting everywhere.
- Mag (comes with one) plastic heavy solid and ready to go.
-trigger nice feel
-delta ring functions
-Spare parts and extra rail stuff tons
-cocking handle heavy duty and functions like the real deal.
-mag fits tight and goes in smooth
-recoil Sweet I'd say more then my .22 long
-not actuate to the sights yet but shoots a dime size group at 40 feet.
-Worked perfectly right out of the box, I read 1 page of instructions first
- 12 gram extremely easy to put in mag
12 gram punctured very easily
shot 10 BPS in full auto out of the box no set up (adjustable)
shot 380- with .20 out of the box

feels as solid as a Tippmann paintball gun . Looks like a real AR, It shoots like a gun,, not a sewing machine..

I have sold 10's of airsoft guns, and maybe 1000's of paintball guns. This is freaking amazing ... so far.

Everything we were hoping for... I can't wait to game this gun.. Yes,,, I'm gaming an airsoft gun. I think this gun could sell for $800 plus easy..

negatives
-Sock was stuck closed out of the box.
-the mag is hard to release with pressure in it. VERY HARD
-12 gram vent after release of mag.

PM's welcome

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

October 14th, 2014, 22:20	#333
SuperHog Trader rating Join Date: Jul 2011 Location: Toronto, Ontario	I don't think they addressed the issue players running low cap capacity with CO2 cartridges in the magazines. No shut off for reloads? Something missing from the video. What is the input pressure for the HPA tank? They have 750ps, 550psi, and 450psi. The 750psi will have the highest recoil but loses regulation below 750psi. Last edited by SuperHog; October 14th, 2014 at 22:44..

October 15th, 2014, 14:29	#338
siggypoo Trader rating Join Date: Mar 2009 Location: Oshawa, Ontario.	Phenom is fine, as long as it's the X7... __________________

November 21st, 2014, 11:35	#343
Matt 'Maverick' Watts Trader rating Join Date: Jul 2010 Location: London, Ontario... or that bunker over there	The internals are based on tippmann's inline blowback internals for several reasons; 1) can easily run on either CO2 or HPA, 2) can provide a much better recoil than the smoother flexvalve engine 3) is damn near indestructable 4) super easy to work on if needed. __________________ The Tier One Tactical Operator Tippmann Arms M4A1 KWA USP .45, KJW P226, KJW hi-cappa

October 14th, 2014, 18:22	#332
dreamkiller Trader rating Join Date: Nov 2013 Location: Toronto, ON	So badlands paintball has gotten a hold of one, and here is the video https://www.youtube.com/watch?v=z2erH_6qFRw

October 15th, 2014, 09:05	#335
AngelusNex formerly Sepulcrum Trader rating Join Date: May 2007 Location: Kingston,ON, aka Funkasia	Really disappointed in the fact they didn't fix the mag design to not vent. Knowing someone with connection to tipman, he was informed that it was being changed as that was why they were postponed from their original late August release date.

October 15th, 2014, 16:10	#339
dreamkiller Trader rating Join Date: Nov 2013 Location: Toronto, ON	yeah phenom's core would've been better. Maybe they'll do that for a higher end model in the future. But right now, the only thing is the mag issue that's bothering me.

November 19th, 2014, 17:34	#340
Adrenalineguy Trader rating Join Date: Jul 2009 Location: London	Tippmann is shipping a few M4's this week. pre sales will be filled first . then We will have a limited number of units available for sale by the week end or maybe Monday Call now to pre book yours. HPA tanks and lines readily available 519 453 0434

November 19th, 2014, 20:51	#341
SuperHog Trader rating Join Date: Jul 2011 Location: Toronto, Ontario	Shouldn't this be in the retailer section?

November 25th, 2014, 04:23	#344
bookyle Trader rating Join Date: Jan 2012 Location: Windsor, ON	Anyone got theirs? Do a review? Does the upper have real steel threads? From what I seen/read it has a replica barrel nut that has the dimension of "teeth" right, but the face is flat, so some rails, in particular the Troy battle rails, do not fit. The magpul MOE handguard (not PTS) does fit.

November 25th, 2014, 20:24	#345
Adrenalineguy Trader rating Join Date: Jul 2009 Location: London	I received the first shipment today. we are shipping the pre orders tomorrow. I picked mine personal one by finding the lowest serial number #130 -I am very impressed so far. --Feels solid, not to heavy but a good weight. -stock solid , (release lever is medium.) -the for grip is nylon but tight and nicely done -front and rear flip up sights Plastic but good quality -Body Metal, good thickness and tight fitting everywhere. - Mag (comes with one) plastic heavy solid and ready to go. -trigger nice feel -delta ring functions -Spare parts and extra rail stuff tons -cocking handle heavy duty and functions like the real deal. -mag fits tight and goes in smooth -recoil Sweet I'd say more then my .22 long -not actuate to the sights yet but shoots a dime size group at 40 feet. -Worked perfectly right out of the box, I read 1 page of instructions first - 12 gram extremely easy to put in mag 12 gram punctured very easily shot 10 BPS in full auto out of the box no set up (adjustable) shot 380- with .20 out of the box feels as solid as a Tippmann paintball gun . Looks like a real AR, It shoots like a gun,, not a sewing machine.. I have sold 10's of airsoft guns, and maybe 1000's of paintball guns. This is freaking amazing ... so far. Everything we were hoping for... I can't wait to game this gun.. Yes,,, I'm gaming an airsoft gun. I think this gun could sell for $800 plus easy.. negatives -Sock was stuck closed out of the box. -the mag is hard to release with pressure in it. VERY HARD -12 gram vent after release of mag. PM's welcome Last edited by Adrenalineguy; November 27th, 2014 at 09:56..

Tippmann M4 Carbine Airsoft?

Airsoft Guns Discussion