Custom G36K handguard

Ninja_En_Short · January 4th, 2014, 17:37

That's the point of it : on the regular one (the standard G36K handguard of my ARES) my Firefox LiPo 11.1V is pressed on quite a bit so I put a few mm on the floor for better insertion.

lurkingknight · January 4th, 2014, 20:04

interesting.... how wide is the opening at the front? is it wide enough to inset a suppressor into the handguard?

Ninja_En_Short · January 4th, 2014, 22:50

Ok so on a G36K (and by extension full size G36) you can put anything you want as the barrel sticks out.

On a G36C the suppressor can be up to 37 mm in diameter (because of side support). If you're using the Magpul MOE rails you might have to recut the screws or sand something though.

lurkingknight · January 4th, 2014, 23:02

now I'm interested.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 4th, 2014, 17:37	#16
Ninja_En_Short Trader rating Join Date: Jul 2007 Location: France, Canada (Montréal)	That's the point of it : on the regular one (the standard G36K handguard of my ARES) my Firefox LiPo 11.1V is pressed on quite a bit so I put a few mm on the floor for better insertion. __________________ Tous les jours nous nous endormons plus instruits mais pas forcément moins bêtes... I can do a CTRL+ATL+DEL on your gun ! Gun doc in Montreal on AEG, GBB, GBBR and Bolt rifle (gaz and spring) Heavy custom builder (including painting)

January 4th, 2014, 20:04	#17
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	interesting.... how wide is the opening at the front? is it wide enough to inset a suppressor into the handguard? __________________ I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.

January 4th, 2014, 22:50	#18
Ninja_En_Short Trader rating Join Date: Jul 2007 Location: France, Canada (Montréal)	Ok so on a G36K (and by extension full size G36) you can put anything you want as the barrel sticks out. On a G36C the suppressor can be up to 37 mm in diameter (because of side support). If you're using the Magpul MOE rails you might have to recut the screws or sand something though. __________________ Tous les jours nous nous endormons plus instruits mais pas forcément moins bêtes... I can do a CTRL+ATL+DEL on your gun ! Gun doc in Montreal on AEG, GBB, GBBR and Bolt rifle (gaz and spring) Heavy custom builder (including painting)

January 4th, 2014, 23:02	#19
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	now I'm interested. __________________ I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.

Custom G36K handguard

Accessories Discussion