A.P.S CAM870 CO2 Powered Shotgun

[cookedham]

get your age verify!!! new user

[QUOTE=Ripper13124;1930343]Help new user on this forum

[Ripper13124]

My âge?? 29 why

[N_Force]

I believe you aren't in Canada, right? We haven't had the APS AOW available in Canada yet! If you are, where did you get it from?

Originally Posted by Ripper13124

Final version of my sf 870

[Ripper13124]

I am from France, and it s in stock on ehobbyasia


It s just the best aps cam for me

[boony]

Here's an update:

-Cut my barrel to around 13"
-OAL is 31"
-Cut the magazine follower by 4cm.

Magazine follower mod:
I did a very minor mod where I can now put 5 shells in the magazine tube.
Before this cut, the 5th shell sticks out ever so slightly that you can't feed it.

I took the same hacksaw I used to cut the barrel to cut the magazine follower by approximately 4mm. So the follower is now 2.1cm. Now 5 shells can be fed easily.

btw, I used a Dewalt 24TPI blade.

Finishing touches for barrel:
I still need to file and sand finely and then apply cold blue to cover some scratches I made and make everything squared.
(Anyone know which shade of cold blue is closest?)


Future Mods:

-I bought the G&P Maruzen tactical flashlight handguard. Once it arrives, I will mod it and install it, hopefully with some pics so you guys can also see what exactly needs to be done. I know a couple of you guys have done this already; its the cheapest route to mimicking the perfection of the Surefire foreend and not paying circa $340!

-I am looking for cheap iron sights like rOnii's, but can't seem to find them for under $100, preferably ghost ring sights with a front raised tritium type sight.

[Ripper13124]

The gp flashlight grip for marui 870 fit good just some scotch on the mag tube to make it bigger and no modification look at mine

[boony]

Originally Posted by Ripper13124

The gp flashlight grip for marui 870 fit good just some scotch on the mag tube to make it bigger and no modification look at mine

Should I cancel my G&P Maruzen version and buy the Marui instead then?
All you need to do is add tape to the tube?

[Ripper13124]

Yes trust in me i don t speak very good english i am french, but the marui grip is bigger the gp 870 version, no dremel, no cutting , just strong black scotch.

3 minutes to fit

[N_Force]

Originally Posted by Ripper13124

Yes trust in me i don t speak very good english i am french, but the marui grip is bigger the gp 870 version, no dremel, no cutting , just strong black scotch.

3 minutes to fit

not sure if I got it right from you. The g&p front grip with flash light for Marui 870, needs a heavy modify to make it fit. I didn't want to try but someone did, check post #83 for details.

[Ripper13124]

negatif i have the gp FOR gp model and the gp FOR marui model, and there aren t the same, with th GP m870 version need modifications, but th GP FOR MARUI m870 no i know what i say

[Nikotin]

Will any RS stock/forends work with the CAM870? Thinking of buying this:

Hogue Stock Remington 870 Overrubber Shotgun Stock Kit with Forend: Amazon.ca: Sports & Outdoors

[N_Force]

the second time you ask the same question, check your post #120, answered post #123.

Originally Posted by Nikotin

Will any RS stock/forends work with the CAM870? Thinking of buying this:

Hogue Stock Remington 870 Overrubber Shotgun Stock Kit with Forend: Amazon.ca: Sports & Outdoors

[Nikotin]

Wow, that's embarrassing. 8O

Thank you!

[Nikotin]

Finally got mine! Milsig didn't have a second box of shells that I wanted so I picked up an HPA tank instead for cheap fills and lower velocity. I'll have more pics when I add new furniture.

[N_Force]

nice! May I ask if you just shoot it and see how's the function like smooth or not, and any shells jam or stuck. Also where did you get it from?

Originally Posted by Nikotin

Finally got mine! Milsig didn't have a second box of shells that I wanted so I picked up an HPA tank instead for cheap fills and lower velocity. I'll have more pics when I add new furniture.