WE AK-74U - was good, now bad

Rommen · March 7th, 2012, 23:23

The bolt doesn't lock. The gun has a firing pin block. What happens is on the last round a lever moves the firing pin out of alignment with the mag valve, so no shot is fired and the gun becomes uncocked. With this type of operation, it shouldn't be affected by a stronger buffer.

On a different (or similar) note, I'd also like to know where you got that RS buffer, I'd love to increase the rof... : D

Shirley · March 8th, 2012, 01:39

Does anyone know on the AK PMC, if there's such a conversion to run no stock?

Eeyore · March 8th, 2012, 11:55

Quote:

Originally Posted by Mr.Hitman

Does anyone know on the AK PMC, if there's such a conversion to run no stock?

Not yet. But WE has two more versions of their AK coming out so perhaps something will appear.

Shirley · March 8th, 2012, 12:07

Feeling like just shaving off the block that attaches the buffer tube on then JB weld that block into the reciever.

Rommen · March 8th, 2012, 12:14

Quote:

Originally Posted by Eeyore

Not yet. But WE has two more versions of their AK coming out so perhaps something will appear.

Not that I don't believe you, but where's your source? I want to check it out some more haha ; D whenever I google it, I just get WE's website or something useless..

Eeyore · March 8th, 2012, 12:14

Trying to make a " Mogadishu" special?

Eeyore · March 8th, 2012, 12:16

Quote:

Originally Posted by Rommen

Not that I don't believe you, but where's your source? I want to check it out some more haha ; D whenever I google it, I just get WE's website or something useless..

My source is WE's AK PMC Manual, it has two different models of WE AK on it.

Shirley · March 9th, 2012, 01:12

Quote:

Originally Posted by Eeyore

My source is WE's AK PMC Manual, it has two different models of WE AK on it.

Problem is I don't want the folding PMC.. Looks wrong.
I'm probably just going to cut the block and JB Weld it in.

Even if I get the folding stock part, I would need to get a new reciever..

Brayden · March 9th, 2012, 17:49

Ok, I give up- somone please post a guide on how to take the front handgaurds off, ive tried everything plausible and msg'd RA Tech but no luck.

Brian McIlmoyle · March 9th, 2012, 17:56

Quote:

Originally Posted by Brayden

Ok, I give up- somone please post a guide on how to take the front handgaurds off, ive tried everything plausible and msg'd RA Tech but no luck.

you have to take the front end of the gun off, the gas block and fore sight assembly

N_Force · March 9th, 2012, 19:37

push and remove pin from this side

unscrew half the way

then holding the flashhilder and front sight and pull it out(you may have to pull harder at the first time), be careful, don't bend the inner barrel.

N_Force · March 9th, 2012, 19:42

home made buffer

it's working and decrease the bolt travel distance in around 1/4. also the shooting sound is much better than before, pop pop pop!!!

TPM001 · March 9th, 2012, 22:15

Quote:

Originally Posted by Brayden

Ok, I give up- somone please post a guide on how to take the front handgaurds off, ive tried everything plausible and msg'd RA Tech but no luck.

Weird. I thought I covered this?!? Check out post #101 of this thread. Its loaded with pics too!

Let me know if it's not clear and I'll help ya out.

Brayden · March 9th, 2012, 23:59

Quote:

Originally Posted by Brian McIlmoyle

you have to take the front end of the gun off, the gas block and fore sight assembly

Quote:

Originally Posted by N_Force

push and remove pin from this side
http://www.airsoftcanada.com/picture...pictureid=3799

unscrew half the way
http://www.airsoftcanada.com/picture...pictureid=3803

then holding the flashhilder and front sight and pull it out(you may have to pull harder at the first time), be careful, don't bend the inner barrel.

Quote:

Originally Posted by TPM001

Weird. I thought I covered this?!? Check out post #101 of this thread. Its loaded with pics too!

Let me know if it's not clear and I'll help ya out.

Shii dunno how I missed this, anyways i've already done all of the above mine is really stuck on there... I've even went at it with a hammer, removed nearly every pin in the whole gun haha, im going to have someone pull as I tap it with a hammer maybe then it'll come off lol.

Also if you guys havn't tried it yet, put your finger at the top of the trigger and bump fire it hahaha, ive been able to get of 6-7 rounds in the cold, tons of fun if your not target shooting.

BlackBerry · March 17th, 2012, 00:38

I've got a noob question.

Would it be awkward to use those PMC mags on the WE74 model?

My limited understanding is that the AK74 chambers 5.56 round, while the AK47 uses the 7.63 rounds.

I think the metal mags look great on the WE74, but I'm also aiming for an accurate representation.

Perhaps there is a derivative of the 74 model that accepts the 7.63 I'm not aware of??

Enlighten me!

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 8th, 2012, 01:39	#137
Shirley A-56 aka Mr.Hitman Trader rating Join Date: Nov 2007 Location: Toronto, ON	Does anyone know on the AK PMC, if there's such a conversion to run no stock? __________________ CANADIAN AIRSOFT PRACTICAL SHOOTING (CAPS) CAPS DIRECTOR # 0047

March 8th, 2012, 12:07	#139
Shirley A-56 aka Mr.Hitman Trader rating Join Date: Nov 2007 Location: Toronto, ON	Feeling like just shaving off the block that attaches the buffer tube on then JB weld that block into the reciever. __________________ CANADIAN AIRSOFT PRACTICAL SHOOTING (CAPS) CAPS DIRECTOR # 0047

March 9th, 2012, 17:49	#144
Brayden ¡¡¡ɹǝʞɐǝɹq oqɯoɔ-ɔ-ɔ-ɔ Trader rating Join Date: Sep 2009 Location: Sault Ste Marie	Ok, I give up- somone please post a guide on how to take the front handgaurds off, ive tried everything plausible and msg'd RA Tech but no luck. __________________ Primary: TM MK 17 MOD 0, ICS L85 A2, Echo1 AKM, Echo1 AK-74, WE AK-74UN, JG AK-47 \| Secondary: TM M9 Proud member of Force Recon

March 7th, 2012, 23:23	#136
Rommen Trader rating Join Date: Jul 2011 Location: Mississauga, Ontario.	The bolt doesn't lock. The gun has a firing pin block. What happens is on the last round a lever moves the firing pin out of alignment with the mag valve, so no shot is fired and the gun becomes uncocked. With this type of operation, it shouldn't be affected by a stronger buffer. On a different (or similar) note, I'd also like to know where you got that RS buffer, I'd love to increase the rof... : D

March 9th, 2012, 19:37	#146
N_Force Trader rating Join Date: Oct 2006 Location: Toronto, Ontario	push and remove pin from this side unscrew half the way then holding the flashhilder and front sight and pull it out(you may have to pull harder at the first time), be careful, don't bend the inner barrel. __________________ aka Uncle

March 9th, 2012, 19:42	#147
N_Force Trader rating Join Date: Oct 2006 Location: Toronto, Ontario	home made buffer it's working and decrease the bolt travel distance in around 1/4. also the shooting sound is much better than before, pop pop pop!!! __________________ aka Uncle Last edited by N_Force; March 17th, 2012 at 20:39..

March 17th, 2012, 00:38	#150
BlackBerry Trader rating Join Date: Aug 2010 Location: Toronto, Ontario	I've got a noob question. Would it be awkward to use those PMC mags on the WE74 model? My limited understanding is that the AK74 chambers 5.56 round, while the AK47 uses the 7.63 rounds. I think the metal mags look great on the WE74, but I'm also aiming for an accurate representation. Perhaps there is a derivative of the 74 model that accepts the 7.63 I'm not aware of?? Enlighten me!

WE AK-74U - was good, now bad

Reviews