AK-47 questions

rje71 · January 9th, 2009, 12:19

Hello, I looked around for a forum to ask some questions and this one looked better then alot of others I found so will give a try here.

I am basically looking for some info on compatible parts for the CYMA AK-47. What I am really looking to use it for is as a display and replica. Therefore the internal workings is not of much inoprtance and I have found one that is broken internally.

So just a couple of questions, does anyone know what magazines will physically fit into the CYMA weapon ? Specifically the ones produced by Star Airsoft Acessories ( http://www.starairsoft.com/product_d...p?productid=3# )

Thanks for any help anyone can give

Robert

sushicake · January 9th, 2009, 12:55

Quote:

Originally Posted by rje71

Hello, I looked around for a forum to ask some questions and this one looked better then alot of others I found so will give a try here.

I am basically looking for some info on compatible parts for the CYMA AK-47. What I am really looking to use it for is as a display and replica. Therefore the internal workings is not of much inoprtance and I have found one that is broken internally.

So just a couple of questions, does anyone know what magazines will physically fit into the CYMA weapon ? Specifically the ones produced by Star Airsoft Acessories ( http://www.starairsoft.com/product_d...p?productid=3# )

Thanks for any help anyone can give

Robert

MAG, King ARMS, STAR, Tokyo Marui all those mags fit.

L473ncy · January 9th, 2009, 13:08

I believe it's a TM clone so anything compatible with TM should be good.

STAR manufactures a lot of mags and is the choice for anyone who is on a tight budget for mags.

I don't know if it will fit out of the box but most people have gotten mags and whatnot to fit just about any gun with a bit of modification and/or sanding.

rje71 · January 9th, 2009, 13:44

Thanks for the input sounds like it will work out fine ...

Neil_N · January 9th, 2009, 18:27

If it is just for display and you are 18 I think you can have a replica of the ak47 as long as the model it is made to represent is more than something like 40 years old. I mean completely non working replicas, like cemented ones. I know this applies for stuff like ww2 weapons so I don’t se why you couldn’t get an ak47 display model and have it on show in your house. I think the reason you can do this is that they are vintage weapons and are classified a memorabilia. I know my grandpa used to have a STEN and a Thompson display model in his den.

zone 69 · January 10th, 2009, 03:03

If your going for a display/replica I think you would want a metal mag like TM or g&p. Star & MAG brand mag's are plastic.

lemegacool · January 10th, 2009, 03:40

get a real sword mag, i think you wont regret it!

rje71 · January 10th, 2009, 21:10

Thanks for all the input . I am indeed over 18 ..

I am waiting to see if the order I placed goes through or I will start over again looking for a decent AK at a ok price. If it falls through I will start looking again...

Any chance it would accept a real magazine ? anyone know ?

Robert

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 9th, 2009, 12:19	#1
rje71 Trader rating Join Date: Jan 2009 Location: Central Maine	AK-47 questions Hello, I looked around for a forum to ask some questions and this one looked better then alot of others I found so will give a try here. I am basically looking for some info on compatible parts for the CYMA AK-47. What I am really looking to use it for is as a display and replica. Therefore the internal workings is not of much inoprtance and I have found one that is broken internally. So just a couple of questions, does anyone know what magazines will physically fit into the CYMA weapon ? Specifically the ones produced by Star Airsoft Acessories ( http://www.starairsoft.com/product_d...p?productid=3# ) Thanks for any help anyone can give Robert

January 9th, 2009, 13:08	#3
L473ncy Trader rating Join Date: Oct 2004 Location: 11-30-24-1W5	I believe it's a TM clone so anything compatible with TM should be good. STAR manufactures a lot of mags and is the choice for anyone who is on a tight budget for mags. I don't know if it will fit out of the box but most people have gotten mags and whatnot to fit just about any gun with a bit of modification and/or sanding. __________________ ಠ_ಠLess QQ more Pew Pew READY TO >> RACE

January 10th, 2009, 03:40	#7
lemegacool Trader rating Join Date: Aug 2008 Location: notre dame des prairies /quebec	get a real sword mag, i think you wont regret it! __________________ member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry

January 9th, 2009, 13:44	#4
rje71 Trader rating Join Date: Jan 2009 Location: Central Maine	Thanks for the input sounds like it will work out fine ...

January 10th, 2009, 03:03	#6
zone 69 Trader rating Join Date: Sep 2006 Location: KELOWNA , B.C CANADA, PLANET EARTH	If your going for a display/replica I think you would want a metal mag like TM or g&p. Star & MAG brand mag's are plastic.

January 10th, 2009, 21:10	#8
rje71 Trader rating Join Date: Jan 2009 Location: Central Maine	Thanks for all the input . I am indeed over 18 .. I am waiting to see if the order I placed goes through or I will start over again looking for a decent AK at a ok price. If it falls through I will start looking again... Any chance it would accept a real magazine ? anyone know ? Robert Last edited by rje71; January 10th, 2009 at 21:21..

AK-47 questions

Newbie Tank