KSC Glock 18c

[versus]

hey guys, i have change my glock 18c with a metal slide and coiled spring... but now it only can shoot full auto, can anyone help to solve this problem??

any help will be much appreciated, thanks alot guys...

[jakster]

Had the same problem on one that I fixed, there is a small spring that you may have inserted wrong.
Here is a link showing everything and here is a photo of the spring and it's position.
Make sure to take your time and look at how it's installed, it took me 2 weeks to figure it out an it only hit me a 11:30 at night when I took alot of time and checked everything slowly piece by piece.

http://www.wargameclub.com/g18c-slide-install.html

http://www.pbase.com/jakster/image/81007042

Good luck
Jakster

[versus]

Originally Posted by jakster

Had the same problem on one that I fixed, there is a small spring that you may have inserted wrong.
Here is a link showing everything and here is a photo of the spring and it's position.
Make sure to take your time and look at how it's installed, it took me 2 weeks to figure it out an it only hit me a 11:30 at night when I took alot of time and checked everything slowly piece by piece.

http://www.wargameclub.com/g18c-slide-install.html

http://www.pbase.com/jakster/image/81007042

Good luck
Jakster

thanks for the feedback bro, but i already adjusted, the glock still shoots full auto, and i can't figure it why..the spring is in the correct position as shown in the pic

[versus]

already adjusted, but my glock still shoots full auto, i follow everything in the pics they showed, but it's still same... anyone who experienced this problem that ca help me solve it...?? really appreciate and thanks i advance for any feedbacks given...:salute:

[Visser]

Not that this will prob help ya at all but that happened to me and I just took it fully appart twice and on the second try I seemed to do something different and now it works. If ur using propane I would suggest to lock tight the screw holding the full rear assembly in the slide in cause I've had it loosen off on me. If ya end up figuring it out post it up cuase I'd love to know what it is that did it to ya and maybe it was the same thing for me.

[versus]

Originally Posted by Visser

Not that this will prob help ya at all but that happened to me and I just took it fully appart twice and on the second try I seemed to do something different and now it works. If ur using propane I would suggest to lock tight the screw holding the full rear assembly in the slide in cause I've had it loosen off on me. If ya end up figuring it out post it up cuase I'd love to know what it is that did it to ya and maybe it was the same thing for me.

tried back to the original slide and it can shoot semi auto, but when i change back to metal it goes on full auto again, i wonder what's wrong... at 1st when i install in can shoot in both mode, but not now...

[Renegade)]

Could be hammer issues? My G19 I just got in an as is deal, shoots full auto

But since u say it works with the stock slide, could be a compatibility issue and needs some modifications somewhere.

[versus]

have anyone encounter this problem before?? and solved it right... ?? looking forward for any help, i tried many ways, and studied it one by one, but still the same, i'm not sure what's goes wrong... really frustrating with this metal slide thingy