G&P outer barrel question...

ssrc30 · December 31st, 2012, 16:55

I would like to replace my aeg's outer barrel with something a little different. I'm just wondering if a Dytac Night Hawk would fit? I know they are made for the WA and TM but not sure if it will fit my aeg.

shootersaber · January 1st, 2013, 03:10

Quote:

Originally Posted by ssrc30

I would like to replace my aeg's outer barrel with something a little different. I'm just wondering if a Dytac Night Hawk would fit? I know they are made for the WA and TM but not sure if it will fit my aeg.

you buy the TM version is ok, it is for AEG

ssrc30 · January 1st, 2013, 11:25

Quote:

Originally Posted by shootersaber

you buy the TM version is ok, it is for AEG

Thank you. I will order one of those. I found my 10" barrel a bit short so I'm going to move up to a 12" barrel.

L473ncy · January 1st, 2013, 12:41

Another option is to get a 2" barrel extension. They exist but I don't know who makes them. IIRC VFC has one and Madbull may have one (and I assume there are ACM and Element versions out there) but look around at other companies if you want.

ie. looks like this - CCW to CCW threading: http://shop.ehobbyasia.com/accessori...n-ccw-ccw.html

NB: G&P barrels are CW threading so if you get a barrel extension you must get a CW to CW extension if you want to keep the original flash hider (or CW to CCW if you want to change your flash hider appropriately).

ssrc30 · January 13th, 2013, 22:33

Yeah I'm gonna go with the extension. Thanks for the advice. Sorry it took so ling for me to get back to you.

Socks · January 14th, 2013, 01:15

hate to bump this but how on earth do you remove the outer barrel from the top rail assembly.

i have every possible screw removed but the one piece upper with rails doesnt want to separate from the barrel

L473ncy · January 14th, 2013, 02:14

What?

Is it a freefloat rail or does it use a delta ring assy.? If the latter you need an AR wrench if the former what kind of rail is it?

Socks · January 14th, 2013, 19:36

the rails are not removable, they are one solid piece with the upper receiver

its a g&p mrp

Socks · November 2nd, 2019, 01:10

Bump still cant get this thing off

BobbyDangerous · November 4th, 2019, 08:05

Quote:

Originally Posted by Socks

Bump still cant get this thing off

The Hex screws on the bottom of the RAS by the lower receiver. Loosen them up and pull the barrel out. Should be like the Real LMT.

Spray some silicone oil in there as well. you're just going to have to wiggle it. Was prob assembled fresh and the dust coating on the rail has prob glued with the outer barrel joint..

Socks · November 7th, 2019, 23:31

Quote:

Originally Posted by BobbyDangerous

The Hex screws on the bottom of the RAS by the lower receiver. Loosen them up and pull the barrel out. Should be like the Real LMT.

Spray some silicone oil in there as well. you're just going to have to wiggle it. Was prob assembled fresh and the dust coating on the rail has prob glued with the outer barrel joint..

Ended up blasting it with wd40 and letting it sit for a while. No amount of wiggling could get it loose so I used a hammer and it popped off finally.

Thanks!

RainyEyes · November 8th, 2019, 01:00

Quote:

Originally Posted by Socks

so I used a hammer and it popped off finally.

Thanks!

Although it took 6 years props to you for never giving up

BobbyDangerous · November 8th, 2019, 06:34

Quote:

Originally Posted by RainyEyes

Although it took 6 years props to you for never giving up

:lol:

BobbyDangerous · November 8th, 2019, 06:35

correct me if im wrong but i think that its tapered like the VFC barrels which is pro why it was nice and snug

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 31st, 2012, 16:55	#1
ssrc30 Trader rating Join Date: Oct 2008 Location: I live in Grande Prairie Alberta	G&P outer barrel question... I would like to replace my aeg's outer barrel with something a little different. I'm just wondering if a Dytac Night Hawk would fit? I know they are made for the WA and TM but not sure if it will fit my aeg. __________________ "Do not touch anything unnecessarily. Beware of pretty girls in dance halls and parks who may be spies, as well as bicycles, revolvers, uniforms, arms, dead horses, and men lying on roads -- they are not there accidentally." Soviet infantry manual, issued in the 1930's

January 1st, 2013, 12:41	#4
L473ncy Trader rating Join Date: Oct 2004 Location: 11-30-24-1W5	Another option is to get a 2" barrel extension. They exist but I don't know who makes them. IIRC VFC has one and Madbull may have one (and I assume there are ACM and Element versions out there) but look around at other companies if you want. ie. looks like this - CCW to CCW threading: http://shop.ehobbyasia.com/accessori...n-ccw-ccw.html NB: G&P barrels are CW threading so if you get a barrel extension you must get a CW to CW extension if you want to keep the original flash hider (or CW to CCW if you want to change your flash hider appropriately). __________________ ಠ_ಠLess QQ more Pew Pew READY TO >> RACE

January 13th, 2013, 22:33	#5
ssrc30 Trader rating Join Date: Oct 2008 Location: I live in Grande Prairie Alberta	Yeah I'm gonna go with the extension. Thanks for the advice. Sorry it took so ling for me to get back to you. __________________ "Do not touch anything unnecessarily. Beware of pretty girls in dance halls and parks who may be spies, as well as bicycles, revolvers, uniforms, arms, dead horses, and men lying on roads -- they are not there accidentally." Soviet infantry manual, issued in the 1930's

January 14th, 2013, 01:15	#6
Socks Trader rating Join Date: Aug 2012	hate to bump this but how on earth do you remove the outer barrel from the top rail assembly. i have every possible screw removed but the one piece upper with rails doesnt want to separate from the barrel

January 14th, 2013, 02:14	#7
L473ncy Trader rating Join Date: Oct 2004 Location: 11-30-24-1W5	What? Is it a freefloat rail or does it use a delta ring assy.? If the latter you need an AR wrench if the former what kind of rail is it? __________________ ಠ_ಠLess QQ more Pew Pew READY TO >> RACE

January 14th, 2013, 19:36	#8
Socks Trader rating Join Date: Aug 2012	the rails are not removable, they are one solid piece with the upper receiver its a g&p mrp

November 2nd, 2019, 01:10	#9
Socks Trader rating Join Date: Aug 2012	Bump still cant get this thing off

November 8th, 2019, 06:35	#14
BobbyDangerous Trader rating Join Date: Mar 2010 Location: Oshawa	correct me if im wrong but i think that its tapered like the VFC barrels which is pro why it was nice and snug __________________ -Dangerous- BA Level 3 Certified

G&P outer barrel question...

Airsoft Guns Discussion