Trigger Clicking

zReaperAssassin · October 28th, 2017, 23:53

Hey everyone,
I have upgraded my intervals in my VFC Gearbox (V2), however when all put back together and placed in the lower, it makes a clicking noise on semi, with no battery attached or anything.
Basically, when I go from safe to semi, it’s almost as if the safety is still on and it needs some pressure to release, then it makes a clicking noise each pull.

When going from semi to full, it squeezes or pulls like it normally should.

When going back from full to semi, it has a tiny resistance, but pulls okay.

Then going from semi to safe it locks like normal, then the cycle repeats every time the sector is switched.

Any ideas on what to look for when opening this up when I’m free? Is it the mechanics safety lever? The trigger shuttle? Cut off lever?

Thanks in advance folks!

Styrak · October 30th, 2017, 01:02

Have you tried actually cycling it on auto? Does it go away?

Danke · October 30th, 2017, 13:27

Worst upgrade ever.

Sounds like the cutoff lever. Take it all apart and start again. Change one thing at a time till if you zero in on the click. And don't put the mechbox back in till it's 100%.

Upgrading a gearbox is rarely a plug and play experience.

RainyEyes · October 30th, 2017, 14:19

Quote:

Originally Posted by Styrak

Have you tried actually cycling it on auto? Does it go away?

I had this happen. It just means you need to cycle the gears so that the cutoff lever and the safety are in sync with the selector plate. If you can plug it in and it shoots no problem on full then on semi then you don't have to worry about it. This happens when doing work on a gearbox sometimes.

ThunderCactus · November 3rd, 2017, 00:04

Without any other details, it does sound like you assembled the mechbox with the sector gear's detent resting directly on the cutoff lever.
Cycle it in auto, then try semi.

Styrak · November 3rd, 2017, 02:45

Is there an echo in here, lol.

RainyEyes · November 3rd, 2017, 10:04

Quote:

Originally Posted by Styrak

Is there an echo in here, lol.

It's for when they REALLY want to get a point across. :tup:

I'm just glad we are in agreement.

zReaperAssassin · November 3rd, 2017, 23:07

Thanks for the info guys! I took the gearbox out, and it seemed to be the cut off lever making the problem. However, I just decided it would be better in the long run for the gun to just buy a GATE Titan lol, so that’s otw now!

Styrak · November 4th, 2017, 00:12

Nothing like throwing $200-$250 at the problem...

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

October 28th, 2017, 23:53	#1
zReaperAssassin Trader rating Join Date: Feb 2017 Location: Glace Bay, NS	Trigger Clicking Hey everyone, I have upgraded my intervals in my VFC Gearbox (V2), however when all put back together and placed in the lower, it makes a clicking noise on semi, with no battery attached or anything. Basically, when I go from safe to semi, it’s almost as if the safety is still on and it needs some pressure to release, then it makes a clicking noise each pull. When going from semi to full, it squeezes or pulls like it normally should. When going back from full to semi, it has a tiny resistance, but pulls okay. Then going from semi to safe it locks like normal, then the cycle repeats every time the sector is switched. Any ideas on what to look for when opening this up when I’m free? Is it the mechanics safety lever? The trigger shuttle? Cut off lever? Thanks in advance folks! __________________ WREAK HAVOC

October 30th, 2017, 01:02	#2
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Have you tried actually cycling it on auto? Does it go away? __________________ Airsoft Sales and Repair/Upgrade Services

October 30th, 2017, 13:27	#3
Danke Prancercise Guru Trader rating Join Date: Oct 2007 Location: Danger Zone	Worst upgrade ever. Sounds like the cutoff lever. Take it all apart and start again. Change one thing at a time till if you zero in on the click. And don't put the mechbox back in till it's 100%. Upgrading a gearbox is rarely a plug and play experience. __________________ Airsoft, where nothing is hurt but feelings.

November 3rd, 2017, 00:04	#5
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	Without any other details, it does sound like you assembled the mechbox with the sector gear's detent resting directly on the cutoff lever. Cycle it in auto, then try semi.

November 3rd, 2017, 02:45	#6
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Is there an echo in here, lol. __________________ Airsoft Sales and Repair/Upgrade Services

November 3rd, 2017, 23:07	#8
zReaperAssassin Trader rating Join Date: Feb 2017 Location: Glace Bay, NS	Thanks for the info guys! I took the gearbox out, and it seemed to be the cut off lever making the problem. However, I just decided it would be better in the long run for the gun to just buy a GATE Titan lol, so that’s otw now! __________________ WREAK HAVOC

November 4th, 2017, 00:12	#9
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Nothing like throwing $200-$250 at the problem... __________________ Airsoft Sales and Repair/Upgrade Services

Trigger Clicking

Doctor's Corner