|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
August 22nd, 2013, 12:25
|
#1 |
|
formerly GRoy
|
VSR 10 air leak
Gents, I'm seeking advice from the vsr10 masters out there.
I have a TM VSR10 that is PDI upgraded but I have a consistent air leak from the rear of my hop up rubber. Every rubber I tried still yields a leak. I'm also using the stock hop up chamber. The only solution I can think of at the moment is to add heat shrink on the nozzle to create a tighter fit. What do you guys think. Thank you |
|
|
|
August 22nd, 2013, 12:46
|
#2 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
What kind of air nozzle do you have?
My PDI nozzle had an O-ring on it that pretty well guaranteed I wouldn't have an air leak there |
|
|
|
|
August 22nd, 2013, 13:23
|
#3 |
|
formerly GRoy
|
I have the newer version. I used to have the version with the o ring. But the o ring kept on breaking or destroying the hop up rubbers I found due to over stretching.
|
|
|
|
|
August 22nd, 2013, 14:48
|
#4 | ||
|
Oh we do hate you, just never felt like wasting the time to give you a user title :P
|
Are you using the new version nozzle with the old version pdi hop up?
If so thats yer issue right there The new "version 2" hop up is a lil different in size hence the new nozzle a stock nozzle should work fine with the new hop up but doesnt with the old stule
__________________
Quote:
Quote:
FinchFieldAirsoft |
||
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
