Bought a VFC!

[AnthB]

Originally Posted by ThunderCactus

most likely your sector gear just ended it's cycle on the cutoff lever, when you're shooting semi make sure the mechbox actually finishes it's cycle before you hit the trigger again, otherwise you could risk pre-engaging the piston and stripping it.

And to give it a better response maybe a wiring kit w/ lipo ? I already want to get a new wiring kit , longer barrel and probably a stronger spring.

[ThunderCactus]

high end wiring, install a basic mosfet if you're rewiring it anyway that'll help the trigger response a LOT
7.4v lipo with high speed gears
and a BETTER barrel, not a longer one. Just get a 6.03 tightbore for whatever length of barrel you have now. Run it to 380fps and use .28s, of course the fps depends on your local field limits.

[AnthB]

Well from what i've seen today , I'll be getting a 509mm barrel extension @ 6.03 . A mosfet wiring kit ( if i can find one ) , Deans replacing my tamiya connectors and a new piston . Should make this gun a ton better but i'm going to be bringing it in for the work to get done. I work on way too many other peoples rooftop units so I know about letting the pro's work on what they know and i'll work on what I know

[ThunderCactus]

Don't extend the inner barrel, it's completely unnecessary, both in performance and aesthetics.

[ccyg8774]

Why using a longer inner barrel?
For MOSFET, check the space for it first. The folding stock for VFC SCAR is great, but you can't put MOSFET in the battery space as that will need more wires passing through the stock. You can put a MOSFET in the receiver, above the gearbox, but the space is very limited, will need a very small MOSFET unit.

[Danke]

I think you miss-understand. Your review isn't consistent with others who own the same AEG. Myself included.

Sounds like you got a used one; and a shanker at that.

For the wiring; I posted some shots back when of my cleanup of the fuse and a deans conversion.

[AnthB]

from all the videos I've watched the 2013 scar h should have the proper trademarks , a 3 spot cheeck rest and it shouldn't come in the vfc hard case . When I went back into mach1 and asked what the deal is they said it is the newest one they got in a couple weeks ago. They also said that only the g&G have the trademarks . Sure alot of youtube is stupid but honestly every video I watched before 2013 has no trademarks, 1 position cheeck rest and comes in a cardboard box .

I'm completely new so I don't know but all I see is conflicting information and I just want to know what I bought for 600...

[Danke]

VFC SCARs had trades 6 years ago. Depending on what country they head to these days they may be blank or may have trades. They had cases when launched if you got the DX version which also came with 2 barrels, a long and a short.

[AnthB]

Originally Posted by Danke

VFC SCARs had trades 6 years ago. Depending on what country they head to these days they may be blank or may have trades. They had cases when launched if you got the DX version which also came with 2 barrels, a long and a short.

Alright well that's good to hear . I got whatever version comes with a nice silencer .