SILYNX C4OPS Replica?

[huang]

SILYNX C4OPS





TRI functional airsoft version is in progress.

[EagleDriver]

The one that GWS had out only worked with an ICOM, Kenwood, and phone/iPhone. Would be nice to have one that works with, say, two Kenwood and the phone.

[ManateeMatt]

Originally Posted by EagleDriver

The one that GWS had out only worked with an ICOM, Kenwood, and phone/iPhone. Would be nice to have one that works with, say, two Kenwood and the phone.

I think emerson is making a clone of the GWS one, that is a clone of silynx.

[LouisZimmerman]

I'll second this general idea: nice to have something that would allow, say, three radios: one for squad, one for overall side, and one for admin/emergency. Having it able to adapt to several connector types would also be good, but would understandably raise the cost.

[BH The Trooper]

This is what i found

http://www.shootercbgear.com/product...oducts_id=6290
http://www.shootercbgear.com/product...oducts_id=6291

and

http://www.ebairsoft.com/emerson-em8960-p-6840.html

you need to buy the PTT wire individually :
http://www.ebairsoft.com/emerson-em5...la-p-6839.html
http://www.ebairsoft.com/emerson-em5...ut-p-6838.html
http://www.ebairsoft.com/emerson-em5...od-p-6837.html

[EagleDriver]

Originally Posted by ManateeMatt

I think emerson is making a clone of the GWS one, that is a clone of silynx.

Silynx makes the C4OPS, one and the same.

[huang]

TRI is doing the full replica, ETA is June.

Wait for TRI one if you do want C4OPS

[Zeonprime]

If it supports my phone, my Puxing 888 and my talkabout count me sold

[EagleDriver]

I bought one of these from Ebaybanned. The Element C4OPS replica. It has a dedicated 3.5mm phone jack and the A and B comms end in a mini din connector, which requires radio specific adapters. So far, it works great with my iPhone, but I cannot test with radios because the radio pigtails were shipped separately and have not arrived yet.

Note that this does NOT work with replica headsets - only real ones. It works with Peltor Comtac II's, MSA Sordin Supreme Pro's, as well as the TEA Ultralite. I bought one of the new Bowman style replicas that can change from left to right, thinking I would need it with this, but it does not work. I also tried some older replica headsets with the TP-120 style connector and they do not work either.

The PTT is really big and does not feature any internal power - the battery compartment is fake. Huang, I would really like it if someone would make the same functionality but in a smaller PTT. I know there are a lot of people who want to do impressions with it, but a smaller, dedicated dual comm + phone PTT would be great.

When the Tri version comes out I will get one and do a comparison if you want.

[kwai33]

I think Tri's production will better than other china replica company,because i did try to use Z-tac comtac headset to united star AN/prc-148 radio for test,anthan my team's 2 of saber,3 of kenwood receiving radio all was Damaged,do you know united star,emerson,z-tac are The same company in China??
How quality of them?you know it!!!

[EagleDriver]

I got the Kenwood pigtails to use with the Emerson today. Unfortunately it is somehow mis-wired. There are three PTT buttons, one for radio A, one for radio B, and a third for the phone (answer/hang up, start/stop music.) Mine works as follows:

PTT A - activates both radios at the same time
PTT B - starts/stops Siri on the iPhone
MODE - answers/hangs up call, starts/stops music.

So it isn't really a dual PTT and really doesn't help other than if you want one radio and a phone.

Taking it apart, I can see that the A radio downlead and B radio downlead are soldered together on all four wires - meaning that it just isn't a crossed wire.

Edit: I did a review of it here:

http://airsoftcanada.com/showthread.php?t=152482