King Arms M4 and Green Label PMAGs

[Rooster]

Just wondering if anyone here is running green label PMAGS in a King Arms M4? If so are the feeding well and fitting properly? I hate having to hold the mags up in the magwell.

I'm looking at buying some new mags but want to be sure they fit well. I searched but all I found was info on PTS mags..

[AngelusNex]

Haven't tried my pmags but my emags (both green label) run flawlessly in my King arms m4.

[funkyboss]

Those green labels PMAGS are working good both on ICS M4 and KA M4A1 metal body.
I had no issue until sand coming inside. Negative point : you can't disassemble them to clean out spring, etc. So be careful with it.

[Rooster]

Thanks for the replies guys.

funkyboss- I had major feeding issues with my ICS till I tried a teammates green label PMAGS and it worked perfectly. Good to hear the King Arms will work with them also.

[L473ncy]

Might have to shim the back of the mag (or your magwell) with some painters tape or something. I've found that they don't always play well with all brands of AEG's since they're just ever so slightly off spec (or What if it's my gun that's offspec....).

[Rooster]

Thanks, yeah I figure with the low cost comes low quality control so variations are bound to happen between batches of mags..

[Boyso]

Originally Posted by funkyboss

Those green labels PMAGS are working good both on ICS M4 and KA M4A1 metal body.
I had no issue until sand coming inside. Negative point : you can't disassemble them to clean out spring, etc. So be careful with it.

This!

I got 5 of them and after one game in the Sand pit, all 5 were broke.

Also sometimes, the follower in the mag would jump out with the last BB...