FN2000 mags

JTF27 · May 17th, 2011, 23:17

Hey all,

Today I purchased the G&G FN2000 and after some trial with the mags I owned I found that the plastic ones did not feed at all and one of my metal mags worked but got jammed and had to be pulled out.

Question being does anyone know which mags work well with the FN2000?

Any help is appreciated.

Cheers

JTF27

R.I.T.Z · May 17th, 2011, 23:22

the G&G F2000 is an odd one, if you look at the included hicap you'll notice that the plastic lip is shorter then on most mags. this is due to a retarded internal design (i think its a mechbox molding issue) in any case G&G m5 midcaps work fine.

Spike · May 17th, 2011, 23:26

One of my team members has one of these queer things, he has MAG mags for it, he had to modify them. The chunk of plastic that holds the BB retainer in place had to be filed down. There's a screw on the mechbox of that blocks mags from catching. See middle mag:

kullwarrior · May 17th, 2011, 23:29

FYI
there's no such thing as FN2000....except in COD
It's called FN F2000

as for mags,
its high caps, G&G mid/low cap, or modded mid/low cap only. Mod is shown above.

JTF27 · May 18th, 2011, 00:02

Thanks for the replies, I'll give it a try. Thanks for the pro tip, was unaware of the proper name.

Cheers all.

Edit: Modded one mag and it feeds perfectly, thanks again.

jagman · May 18th, 2011, 00:54

Actually it is called a G&G G2010, CA mags won't fit in mine, KWA metal high caps feed, and G&P metal midcaps work once modified, if anyone tries the 190 rnd mids let me know, good luck any you will enjoy your addition, outranges most and very versatile, I love mine

krap101 · May 18th, 2011, 01:11

Pmags definitely don't work, but emags will with some pushing. The short pmags work well though, and that's what I'm using currently (with some ranger plates).

G_unit · May 18th, 2011, 17:26

Quote:

Originally Posted by kullwarrior

FYI
there's no such thing as FN2000....except in COD
It's called FN F2000

Unnecessary

fi3re · May 18th, 2011, 17:33

Quote:

Originally Posted by G_unit

Unnecessary

well if someone called the p90 an fn90 would you correct them?
worth pointing out imo

G_unit · May 18th, 2011, 17:49

Quote:

Originally Posted by fi3re

well if someone called the p90 an fn90 would you correct them?
worth pointing out imo

No, I would put two and two together and figure it out.

Grudge · May 18th, 2011, 17:52

Quote:

Originally Posted by G_unit

No, I would put two and two together and figure it out.

Op was being corrected, not flamed. Proper terminology show respect for the equipment we use.:banghead:

G_unit · May 18th, 2011, 17:59

Quote:

Originally Posted by multitech

Op was being corrected, not flamed. Proper terminology show respect for the equipment we use.:banghead:

Show respect for the one missing letter? Flamed or not, its still unnecessary.

Steven · May 18th, 2011, 18:34

Quote:

Originally Posted by G_unit

Show respect for the one missing letter? Flamed or not, its still unnecessary.

It's not a big deal, stop de-railing the thread with this banter.

OP: If any of the above doesn't work, I can ask a fellow club-member here what he uses.

NOOB · May 26th, 2011, 15:14

Heavily fitting them

use your imaginations

Outside In · June 4th, 2011, 04:06

I use SRC low-caps, and they work like a charm. I had feeding issues with the high-cap that G&G included with the F2000, but I've had no trouble with the low-caps. Just be sure to check the size of the retainer, as detailed in the post above.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

May 17th, 2011, 23:26	#3
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	One of my team members has one of these queer things, he has MAG mags for it, he had to modify them. The chunk of plastic that holds the BB retainer in place had to be filed down. There's a screw on the mechbox of that blocks mags from catching. See middle mag: __________________ I change primaries like other people change socks.

May 17th, 2011, 23:29	#4
kullwarrior Trader rating Join Date: Jan 2008 Location: Edmonton, AB, Canada	FYI there's no such thing as FN2000....except in COD It's called FN F2000 as for mags, its high caps, G&G mid/low cap, or modded mid/low cap only. Mod is shown above. __________________

May 18th, 2011, 01:11	#7
krap101 Trader rating Join Date: Jun 2007 Location: Roscoe, IL USA	Pmags definitely don't work, but emags will with some pushing. The short pmags work well though, and that's what I'm using currently (with some ranger plates). __________________ AIRSOFT PRECISION DYNAMICS - Augmenting Reality

May 17th, 2011, 23:22	#2
R.I.T.Z Crackers Trader rating Join Date: Mar 2009 Location: The Shwa	the G&G F2000 is an odd one, if you look at the included hicap you'll notice that the plastic lip is shorter then on most mags. this is due to a retarded internal design (i think its a mechbox molding issue) in any case G&G m5 midcaps work fine.

May 18th, 2011, 00:54	#6
jagman Trader rating Join Date: Aug 2010 Location: London	Actually it is called a G&G G2010, CA mags won't fit in mine, KWA metal high caps feed, and G&P metal midcaps work once modified, if anyone tries the 190 rnd mids let me know, good luck any you will enjoy your addition, outranges most and very versatile, I love mine

June 4th, 2011, 04:06	#15
Outside In Trader rating Join Date: Apr 2011 Location: Calgary	I use SRC low-caps, and they work like a charm. I had feeding issues with the high-cap that G&G included with the F2000, but I've had no trouble with the low-caps. Just be sure to check the size of the retainer, as detailed in the post above.

FN2000 mags

Airsoft Guns Discussion