TM Mp5K FPS magazine Issue

THe_Silencer · December 3rd, 2010, 21:03

My mp5k is shooting low 200ish fps. When i push the mag all the way in, it shoots 360ish fps like it should. Seems to be doing this with every mag I got. Any idea how to fix this issue?

DarkAngel · December 3rd, 2010, 21:57

1) did you replace any of the internals such as the nozzle?

2) Check to see if your catch is worn. You shouldnt be losing air thru the feed tube as the nozzle should push right up against the BB, but its something to check anyways

THe_Silencer · December 3rd, 2010, 23:56

Yeah most of the internals have been upgraded. I had a King arms mp5k nozzle installed. Reinstalled the Tm nozzle, same thing happens.

ancorp · December 3rd, 2010, 23:59

Mag pressure would move the hopup unit, so my guess is that the problem lies with hopup unit to mechbox seal.

THe_Silencer · December 4th, 2010, 00:17

ANyone have any idea how to fix this hopup issue?

THe_Silencer · December 4th, 2010, 23:21

NVM I fixed it.

cjboi · December 4th, 2010, 23:28

Quote:

Originally Posted by THe_Silencer

My mp5k is shooting low 200ish fps. When i push the mag all the way in, it shoots 360ish fps like it should. Seems to be doing this with every mag I got. Any idea how to fix this issue?

buy a new mag release make it sure it has one of those hard springs, so the mags wont get loose and tighten up the screws on your receiver so it would have a good fit for your magazine. Hope this helps, this is common with mp5's because some brands have looser mag release and some people put tapes on top of the mag to tighten up the mag but its not really a good idea because in the long run it loosens the receiver.

THe_Silencer · December 5th, 2010, 22:01

Thanks Cjboi, I realized that tightening all the screws on the receiver made a huge difference.

cjboi · December 5th, 2010, 22:37

no problem glad i can help

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 3rd, 2010, 21:03	#1
THe_Silencer Trader rating Join Date: Jul 2009 Location: Hamilton,ON	TM Mp5K FPS magazine Issue My mp5k is shooting low 200ish fps. When i push the mag all the way in, it shoots 360ish fps like it should. Seems to be doing this with every mag I got. Any idea how to fix this issue? __________________ It is the mark of an educated mind to be able to entertain a thought without accepting it - Aristotle -Founder of Steel City Hamilton Infantry and Tactics -Certified level 43 Autosniper by Commander Amos

December 3rd, 2010, 21:57	#2
DarkAngel * Age Verifier status suspended * Trader rating Join Date: Jun 2006 Location: Scarborough	1) did you replace any of the internals such as the nozzle? 2) Check to see if your catch is worn. You shouldnt be losing air thru the feed tube as the nozzle should push right up against the BB, but its something to check anyways __________________ Certified Sniper Clinic Instructor and Counter Sniper Sentinel Arms Customs - Specializing In Unique, One of a kind guns

December 3rd, 2010, 23:56	#3
THe_Silencer Trader rating Join Date: Jul 2009 Location: Hamilton,ON	Yeah most of the internals have been upgraded. I had a King arms mp5k nozzle installed. Reinstalled the Tm nozzle, same thing happens. __________________ It is the mark of an educated mind to be able to entertain a thought without accepting it - Aristotle -Founder of Steel City Hamilton Infantry and Tactics -Certified level 43 Autosniper by Commander Amos

December 3rd, 2010, 23:59	#4
ancorp AK Guru Trader rating Join Date: Mar 2005 Location: Vaughan, Ontario (near Toronto)	Mag pressure would move the hopup unit, so my guess is that the problem lies with hopup unit to mechbox seal. __________________

December 4th, 2010, 00:17	#5
THe_Silencer Trader rating Join Date: Jul 2009 Location: Hamilton,ON	ANyone have any idea how to fix this hopup issue? __________________ It is the mark of an educated mind to be able to entertain a thought without accepting it - Aristotle -Founder of Steel City Hamilton Infantry and Tactics -Certified level 43 Autosniper by Commander Amos

December 4th, 2010, 23:21	#6
THe_Silencer Trader rating Join Date: Jul 2009 Location: Hamilton,ON	NVM I fixed it. __________________ It is the mark of an educated mind to be able to entertain a thought without accepting it - Aristotle -Founder of Steel City Hamilton Infantry and Tactics -Certified level 43 Autosniper by Commander Amos

December 5th, 2010, 22:01	#8
THe_Silencer Trader rating Join Date: Jul 2009 Location: Hamilton,ON	Thanks Cjboi, I realized that tightening all the screws on the receiver made a huge difference. __________________ It is the mark of an educated mind to be able to entertain a thought without accepting it - Aristotle -Founder of Steel City Hamilton Infantry and Tactics -Certified level 43 Autosniper by Commander Amos

December 5th, 2010, 22:37	#9
cjboi Trader rating Join Date: Oct 2009 Location: manitoba	no problem glad i can help __________________ how can you help someone else if they're not willing to help themselves.

TM Mp5K FPS magazine Issue

Doctor's Corner